MKP1848_11

MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type FEATURES W I • Compliant to RoHS Directive 2002/95/EC • AEC-Q200 qualified RATED CAPACITANCE h 1 µF to 400 µF CAPACITANCE TOLERANCE ±5% 6-1 Ø dt P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm I DC VOLTAGE RATING UNDC at 85 °C UOPDC at 70 °C 450 V 700 V 800 V 900 V 650 V 1100 V 1200 V 800 V 850 V 500 V 800 V 900 V 1100 V 1350 V 1500 V UOPDC at 105 °C 300 V 500 V 570 V W INSULATION RESISTANCE Marking h RC between leads, after 1 min > 10 000 s For UNDC  500 V measuring voltage 100 V For UNDC > 500 V measuring voltage 500 V SELF INDUCTANCE (Ls) Ø dt P1 ± 0.5 P2 ± 0.5 6-2 < 1 nH per mm of lead spacing Dimensions in millimeters Ø dt ± 10 % of standard diameter specified WITHSTANDING DC VOLTAGE BETWEEN TERMINALS APPLICATIONS High performance DC filtering applications 1.5 UNDC for 10 s, cut off current 10 mA, rise time 1000 V/s See document “Voltage Proof Test for Metalized Film Capacitors” www.vishay.com/doc?28169 REFERENCE STANDARDS IEC 61071 IEC 60068 MAXIMUM APPLICABLE PEAK TO PEAK RIPPLE VOLTAGE 0.2 x UNDC CLIMATIC TESTING CLASS MARKING C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer’s type designation; manufacturer’s logo; year and week of manufacture 40/105/56 RATED TEMPERATURE 85 °C DIELECTRIC Polypropylene film MAXIMUM PERMISSIBLE CASE TEMPERATURE 105 °C, observing voltage derating ELECTRODES Metallized dielectric capacitor LIFE TIME EXPECTANCY Useful life time: > 100 000 h at UNDC and 70 °C FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC; 40 °C CONSTRUCTION Mono construction ENCAPSULATION Plastic case, sealed with resin Flame retardant DETAIL SPECIFICATION For more detailed data and test requirements, contact: dc-film@vishay.com TERMINALS Tinned wires GENERAL INFORMATION Characteristics and definitions used for film capacitors: www.vishay.com/docs/28147/intro.pdf Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 281 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) 10 100 1000 10 000 4 5 6 7 512 612 712 CAPACITANCE (numerically) Example: 1200 nF 12 000 nF 120 000 nF 1.2 µF 12 µF 120 µF P1 (mm) 27.5 37.5 52.5 PITCH CODE K P Y MKP 1848 6 12 09 4 P 4 SPECIAL CODE FOR TERMINAL 2 2 pins 4 pins P2 = 10.2 mm 4 pins P2 = 20.3 mm Customized TYPE CONSTRUCTION TOLERANCE METALLIZED POLYPROPYLENE VOLTAGE UN = 45 = 450 VDC UN = 70 = 700 VDC UN = 08 = 800 VDC UN = 09 = 900 VDC UN = 91 = 1100 VDC UN = 92 = 1200 VDC Note (1) Tabs terminals or customized terminals are available on request 4 ±5% 4 5 (1) MULTIPLE PINS CAPACITORS l Marking h w 6 pins lt Ø dt P1 P2 2 x P2 l Marking h w 12 pins lt Ø dt P1 P2 2 x P2 3 x P2 4 x P2 5 x P2 www.vishay.com 282 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SPECIFIC REFERENCE DATA 450 VDC UNDC at 85 °C = 450 V, UOPDC at 70 °C = 500 V, UOPDC at 105 °C = 300 V CAP. (9) Vishay Roederstein DIMENSIONS (mm) (5) w 9.0 9.0 11.0 11.0 13.0 15.0 15.0 18.0 18.0 18.0 21.0 20.0 18.5 18.5 18.5 21.5 21.5 21.5 24.0 30.0 30.0 25.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 45.0 45.0 45.0 130 h 19.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 28.0 28.0 31.0 35.0 35.5 35.5 35.5 38.5 38.5 38.5 44.0 l 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 43.0 43.0 42.0 P1 P2 (µF) 1 2 3 4 5 6 7 8 9 10 12 15 10 12 15 20 22 25 30 35 40 40 45 50 55 60 65 70 75 80 90 95 100 400 (10) (mm) (mm) 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2/ 20.3 10.2/ 20.3 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 tan  1 kHz < (10-4) (4) 2 4 2 4 2 4 (mm) (V/µs) (A) pins pins pins pins pins pins 0.8 75 75 2.5 54 10 0.8 75 150 3 34.5 10 0.8 75 225 4 23.0 10 0.8 75 300 4 20.5 10 0.8 75 375 5 16.5 10 0.8 75 450 6 13.5 10 0.8 75 525 6.5 11.5 10 0.8 75 600 8.5 8.5 10 0.8 75 675 8.5 9.0 10 0.8 75 750 9 8.0 10 0.8 75 900 10 7.0 10 0.8 75 1125 11.5 6.0 10 1.0 40 400 7.5 8 13.5 12.0 18 16 1.0 40 480 8 8.5 11.5 10.0 18 16 1.0 40 600 9 10 9.0 8.0 18 16 1.0 40 800 11 12 7.0 6.0 18 16 1.0 40 880 11 11.5 7.5 6.5 18 16 1.0 40 1000 11.5 12.5 6.5 5.5 18 16 1.0 40 1200 13.5 15 5.5 4.5 18 16 Ø dt dV/dt IPEAK IRMS (A) (2) ESR (m) (3) 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 40 40 20 20 20 20 20 20 20 20 20 20 20 20 20 10 1400 1600 17 17 18.5 18.5 4.0 4.0 6.5 7.0 5.5 5.5 5.0 4.0 4.5 4.0 4.0 3.5 3.5 6.0 6.0 5.0 5.0 4.5 3.5 4.0 3.5 3.5 3.0 3.0 2.5 2.0 1.5 18 18 35 35 35 35 35 35 35 35 35 16 16 30 30 30 30 30 30 30 30 30 30 30 30 35 35 tan  10 kHz < (10-4) (4) 2 4 pins pins 85 85 85 85 85 85 85 85 85 85 85 85 160 140 160 140 160 140 160 140 160 140 160 140 160 140 160 140 160 140 310 310 310 310 310 310 310 310 310 280 280 280 280 280 280 280 280 280 280 280 280 310 380 MASS SPQ (6) (g) 6.0 5.5 8.5 8.5 10.5 12.5 11.5 15.0 16.0 15.0 21.5 20.0 34 32 30 36 38 36 48 57 60 66 70 88 96 91 100 112 108 102 127 124 120 266 490 (pcs) 160 160 130 130 115 100 100 80 80 80 65 70 105 105 105 91 91 91 77 63 63 55 55 45 45 45 40 40 40 40 30 30 30 20 10 PART NUMBER (1) MKP1848510454K2 MKP1848520454K2 MKP1848530454K2 MKP1848540454K2 MKP1848550454K2 MKP1848560454K2 MKP1848570454K2 MKP1848580454K2 MKP1848590454K2 MKP1848610454K2 MKP1848612454K2 MKP1848615454K2 MKP1848610454P* MKP1848612454P* MKP1848615454P* MKP1848620454P* MKP1848622454P* MKP1848625454P* MKP1848630454P* MKP1848635454P* MKP1848640454P* MKP1848640454Y* MKP1848645454Y* MKP1848650454Y* MKP1848655454Y* MKP1848660454Y* MKP1848665454Y* MKP1848670454Y* MKP1848675454Y* MKP1848680454Y* MKP1848690454Y5 MKP1848695454Y5 MKP1848710454Y5 MKP1848720454Y5 (7) MKP1848740454Y5 (8) 45.0 42.0 37.5 45.0 42.0 37.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 50.0 45.0 45.0 45.0 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 800 13 13.5 900 12.5 13.5 1000 15 15.5 1100 15 15.5 1200 15.5 16.5 1300 19 20.5 1400 18 19 1500 19 20.5 1600 19 20.5 1800 21.5 1900 21.5 2000 23.5 2000 4000 30.5 50.5 200 (10) 70.0 65.0 57.5 52.5 65.0 57.5 52.5 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) SPQ = Standard Packing Quantity (7) 6 pins (8) 12 pins (9) Intermediate capacitance values available on request. (10) Under release Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 283 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SPECIFIC REFERENCE DATA 700 VDC UNDC at 85 °C = 700 V, UOPDC at 70 °C = 800 V, UOPDC at 105 °C = 500 V CAP. (9) DIMENSIONS (mm) (5) w 9.0 9.0 h l P1 P2 Ø dt dV/dt IPEAK (µF) 1 2 3 4 5 6 7 8 9 10 12 10 12 15 20 22 25 30 35 30 35 40 45 50 55 60 65 70 75 80 160 (10 320 (10) (mm) (mm) (mm) (V/µs) (A) 10.2 10.2 10.2 10.2 10.2 10.2 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 75 75 75 75 75 75 75 75 75 75 75 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 20 20 20 20 20 20 75 150 225 300 375 450 525 600 675 750 900 400 480 600 800 880 tan  tan  10 kHz MASS SPQ 1 kHz (5) -4) (4) < (10-4) (4) < (10 PART NUMBER (1) 2 4 2 4 2 4 2 4 pins pins pins pins pins pins pins pins (g) (pcs) IRMS (A) (2) ESR (m) (3) 2.5 3 4 5 6 7.5 8 8.5 10 10 11.5 7.5 8 9 11 13 8 8.5 10 12 13.5 54.0 34.5 23.0 17.0 14.0 11.5 10.0 8.5 7.5 7.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 15 15 15 15 15 15 15 15 30 30 30 30 30 30 30 30 13 13 13 13 13 13 13 13 25 25 25 25 25 25 25 25 25 25 25 28 28 68 68 68 68 68 68 68 68 68 68 68 135 135 135 135 135 135 135 135 270 270 270 270 270 270 270 270 120 120 120 120 120 120 120 120 240 240 240 240 240 240 240 240 240 240 240 280 280 6.0 5.5 8.5 10.5 12 17 16 15 22 21 20 34 32 30 36 49 47 62 55 76 71 66 95 88 112 107 100 128 123 119 264 359 160 160 130 115 100 80 80 80 65 65 70 105 105 105 91 77 77 63 63 55 55 55 45 45 40 40 40 30 30 30 20 10 MKP1848510704K2 MKP1848520704K2 MKP1848530704K2 MKP1848540704K2 MKP1848550704K2 MKP1848560704K2 MKP1848570704K2 MKP1848580704K2 MKP1848590704K2 MKP1848610704K2 MKP1848612704K2 MKP1848610704P* MKP1848612704P* MKP1848615704P* MKP1848620704P* MKP1848622704P* MKP1848625704P* MKP1848630704P* MKP1848635704P* MKP1848630704Y* MKP1848635704Y* MKP1848640704Y* MKP1848645704Y* MKP1848650704Y* MKP1848655704Y* MKP1848660704Y* MKP1848665704Y* MKP1848670704Y5 MKP1848675704Y5 MKP1848680704Y5 MKP1848716704Y5 (7) MKP1848732704Y5 (8) 19.0 32.0 27.5 19.0 32.0 27.5 11.0 21.0 32.0 27.5 13.0 23.0 32.0 27.5 15.0 25.0 32.0 27.5 18.0 28.0 32.0 27.5 18.0 28.0 32.0 27.5 18.0 28.0 32.0 27.5 21.0 31.0 32.0 27.5 21.0 31.0 32.0 27.5 20.0 35.0 32.0 27.5 18.5 35.5 43.0 37.5 18.5 35.5 43.0 37.5 18.5 35.5 43.0 37.5 21.5 38.5 43.0 37.5 24.0 44.0 42.0 37.5 24.0 44.0 42.0 37.5 13.5 12.0 11.5 10.0 9.0 7.0 6.0 5.5 4.5 4.0 9.0 7.5 6.5 6.0 5.5 5.0 4.5 4.0 8.0 6.0 5.5 5.0 4.0 3.5 8.0 7.0 6.0 5.5 5.0 4.5 4.0 3.5 3.5 3.0 3.0 2.5 1.3 1000 13.5 14.5 1200 1400 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 3200 6400 16 17 11 12 13 14.5 15 17 18 19 17 18.5 12 12.5 13.5 15 15.5 18 19 20.5 20 21.5 21.5 30.5 54 30.0 45.0 42.0 37.5 10.2/ 20.3 30.0 45.0 42.0 37.5 10.2/ 20.3 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 30.0 45.0 57.5 52.5 30.0 45.0 57.5 52.5 35.0 50.0 57.5 52.5 35.0 50.0 57.5 52.5 35.0 50.0 57.5 52.5 45.0 45.0 57.5 52.5 45.0 45.0 57.5 52.5 45.0 45.0 57.5 52.5 70.0 65.0 57.5 52.5 130.0 65.0 57.5 52.5 10.2 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) SPQ = Standard Packing Quantity (7) 6 pins (8) 12 pins (9) Intermediate capacitance values available on request. (10) Under release www.vishay.com 284 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SPECIFIC REFERENCE DATA 800 VDC UNDC at 85 °C = 800 V, UOPDC at 70 °C = 900 V, UOPDC at 105 °C = 570 V CAP. (9) Vishay Roederstein DIMENSIONS (mm) (5) w 9.0 h l P1 P2 Ø dt dU/dt IPEAK IRMS (A) (2) ESR (m) (3) tan  tan  10 kHz MASS SPQ 1 kHz (5) -4) (4) < (10-4) (4) < (10 (g) 6.5 9.0 11 12 17 16 23 21 21 32 30 37 47 65 61 69 97 91 112 104 131 125 276 393 (pcs) 160 130 115 100 80 80 65 65 70 105 105 91 77 63 63 55 45 45 40 40 30 30 20 10 PART NUMBER (1) (µF) 1 2 3 4 5 6 7 8 9 10 12 15 20 22 25 30 35 40 45 50 55 60 120 (10) 240 (10) 2 4 2 4 2 4 2 4 (mm) (mm) (mm) (V/µs) (A) pins pins pins pins pins pins pins pins 10.2 10.2 10.2 10.2 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 75 75 75 75 75 75 75 75 75 40 40 40 40 40 40 10 10 10 10 10 10 10 10 10 75 150 225 300 375 450 525 600 675 400 480 600 800 2 3.5 4.5 5.5 7 7.5 9 9.5 10 8 8.5 10 13 8.5 9 11 13.5 62.5 31.0 21.0 15.5 12.5 10.5 9.0 8.0 8.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 14 14 14 14 14 14 25 25 25 25 25 12 12 12 12 12 12 22 22 22 22 22 22 22 22 22 60 60 60 60 60 60 60 60 60 - 19.0 32.0 27.5 MKP1848510084K2 MKP1848520084K2 MKP1848530084K2 MKP1848540084K2 MKP1848550084K2 MKP1848560084K2 MKP1848570084K2 MKP1848580084K2 MKP1848590084K2 MKP1848610084P* MKP1848612084P* MKP1848615084P* MKP1848620084P* MKP1848622084P* MKP1848625084P* MKP1848630084Y* MKP1848635084Y* MKP1848640084Y* MKP1848645084Y* MKP1848650084Y* MKP1848655084Y5 MKP1848660084Y5 MKP1848712084Y5 (7) MKP1848724084Y5 (8) 11.0 21.0 32.0 27.5 13.0 23.0 32.0 27.5 15.0 25.0 32.0 27.5 18.0 28.0 32.0 27.5 18.0 28.0 32.0 27.5 21.0 31.0 32.0 27.5 21.0 31.0 32.0 27.5 20.0 35.0 32.0 27.5 18.5 35.5 43.0 37.5 18.5 35.5 43.0 37.5 21.5 38.5 43.0 37.5 24.0 44.0 42.0 37.5 12.5 11.0 10.5 9.0 8.5 6.0 5.5 5.0 8.0 7.0 6.0 5.5 5.0 7.5 5.5 5.0 4.5 7.5 6.0 5.5 5.0 4.5 4.0 3.5 3.2 1.6 122 110 122 110 122 110 122 110 122 110 122 110 240 215 240 215 240 215 240 215 240 215 215 215 215 215 10.2/ 30.0 45.0 42.0 37.5 20.3 30.0 45.0 42.0 37.5 25.0 45.0 57.5 52.5 30.0 45.0 57.5 52.5 30.0 45.0 57.5 52.5 35.0 50.0 57.5 52.5 35.0 50.0 57.5 52.5 45.0 45.0 57.5 52.5 45.0 45.0 57.5 52.5 70.0 65.0 57.5 52.5 130.0 65.0 57.5 52.5 10.2/ 20.3 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 880 14.5 15.5 1000 15.5 300 350 12 13 16 12 14.5 15 17 18 18.5 20 27 48.5 400 14.5 450 500 550 600 1600 3200 16 17 - Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) SPQ = Standard Packing Quantity (7) 6 pins (8) 12 pins (9) Intermediate capacitance values available on request. (10) Under release Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 285 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SPECIFIC REFERENCE DATA 900 VDC UNDC at 85 °C = 900 V, UOPDC at 70 °C = 1100 V, UOPDC at 105 °C = 650 V CAP. (9) DIMENSIONS (mm) (5) w 9.0 h l P1 P2 Ø dt dV/dt IPEAK IRMS (A) (2) ESR (m) (3) tan  tan  10 kHz MASS SPQ 1 kHz (5) -4) (4) < (10-4) (4) < (10 (g) 6.0 11.0 12.0 16.5 22.5 21.0 21.0 32 30 33 31 30 39 36 47 45 57 70 73 70 98 89 109 99 124 117 259 608 (pcs) 160 115 100 80 65 65 70 105 105 105 105 105 91 91 77 77 63 55 55 55 45 45 40 40 30 30 20 10 PART NUMBER (1) (µF) 1 2 3 4 5 6 7 5 6 7 8 9 10 12 15 16 20 15 20 22 25 30 35 40 45 50 100 (10) 2 4 2 4 2 4 2 4 (mm) (mm) (mm) (V/µs) (A) pins pins pins pins pins pins pins pins 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 40 80 80 80 80 80 80 20 40 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 20 20 20 20 40 160 240 320 400 480 560 100 240 280 320 360 400 480 600 640 800 300 400 440 500 2 3.5 5 6 7.5 8.5 9 6 6.5 6.5 7 7.5 8.5 9.5 11 11 14 9 9.5 10 11 7 7 8 9 10 12 12 63.0 32.0 21.0 16.0 13.0 10.0 9.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12 12 12 12 12 12 12 12 12 12 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 22 22 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 90 90 90 90 90 90 90 90 90 90 19.0 32.0 27.5 MKP1848510094K2 MKP1848520094K2 MKP1848530094K2 MKP1848540094K2 MKP1848550094K2 MKP1848560094K2 MKP1848570094K2 MKP1848550094P* MKP1848560094P* MKP1848570094P* MKP1848580094P* MKP1848590094P* MKP1848610094P* MKP1848612094P* MKP1848615094P* MKP1848616094P* MKP1848620094P* MKP1848615094Y* MKP1848620094Y* MKP1848622094Y* MKP1848625094Y* MKP1848630094Y* MKP1848635094Y* MKP1848640094Y* MKP1848645094Y5 MKP1848650094Y5 MKP1848710094Y5 (7) MKP1848720094Y5 (8) 13.0 23.0 32.0 27.5 15.0 25.0 32.0 27.5 18.0 28.0 32.0 27.5 21.0 31.0 32.0 27.5 21.0 31.0 32.0 27.5 20.0 35.0 32.0 27.5 18.5 35.5 43.0 37.5 10.2 18.5 35.5 43.0 37.5 10.2 18.5 35.5 43.0 37.5 10.2 18.5 35.5 43.0 37.5 10.2 18.5 35.5 43.0 37.5 10.2 21.5 38.5 43.0 37.5 10.2 21.5 38.5 43.0 37.5 10.2 24.0 44.0 42.0 37.5 10.2 24.0 44.0 42.0 37.5 10.2 10.2/ 30.0 45.0 42.0 37.5 20.3 25.0 45.0 57.5 52.5 10.2 25.0 45.0 57.5 52.5 10.2 25.0 45.0 57.5 52.5 10.2 30.0 45.0 57.5 52.5 20.3 30.0 45.0 57.5 52.5 20.3 35.0 50.0 57.5 52.5 20.3 35.0 50.0 57.5 52.5 20.3 45.0 45.0 57.5 52.5 20.3 45.0 45.0 57.5 52.5 20.3 70.0 65.0 57.5 52.5 20.3 6.5 21.0 19.0 18.0 16.0 18.0 16.0 14.0 12.0 12.0 11.0 10.0 9.0 8.0 8.0 7.0 7.0 5.0 7.5 16.0 14.0 15.5 6.0 9.5 14.0 12.0 10 12.0 11.0 10.5 11.0 10.0 11.5 10.0 9.0 13 17 16.5 18.5 26.5 48.5 8.0 6.0 7.0 6.0 5.0 5.0 4.0 3.3 1.6 200 185 200 185 200 185 200 185 200 185 200 185 200 185 185 185 205 205 600 12.5 800 15.5 900 1000 2000 4000 - 700 14.5 15.5 7.0 200 (10) 130.0 65.0 57.5 52.5 20.3 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) SPQ = Standard Packing Quantity (7) 6 pins (8) 12 pins (9) Intermediate capacitance values available on request. (10) Under release www.vishay.com 286 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SPECIFIC REFERENCE DATA 1100 VDC UNDC at 85 °C = 1100 V, UOPDC at 70 °C = 1350 V, UOPDC at 105 °C = 800 V CAP. (9) Vishay Roederstein DIMENSIONS (mm) (5) w h l P1 P2 Ø dt dV/dt IPEAK IRMS (A) (2) ESR (m) (3) tan  tan  1 kHz 10 kHz MASS SPQ (5) < (10-4) (4) < (10-4) (4) (g) 9.0 12.0 16.0 21.5 21.5 33 30 39 37 50 48 63 81 77 70 91 115 108 126 256 257 606 608 (pcs) 130 100 80 65 65 105 105 91 91 77 77 63 55 55 55 45 40 40 30 20 20 10 10 PART NUMBER (1) (µF) 1 2 3 4 5 5 6 7 8 9 10 12 10 12 15 20 22 25 30 60 (10) (mm) (mm) (mm) (V/µs) (A) 10.2 10.2 10.2 10.2 10.2 10.2 10.2/ 20.3 10.2 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 95 95 95 95 95 45 45 45 45 45 45 45 23 23 23 23 23 23 23 23 23 23 23 95 190 285 380 475 225 270 315 360 405 450 540 230 276 345 460 506 575 690 1380 1610 2760 3220 2 4 2 4 2 4 2 4 pins pins pins pins pins pins pins pins 3 4.5 6 8 9 6.5 7 8 9 10 10.5 7 7.5 8.5 9.5 45.5 23.0 15.5 11.5 9.5 6.0 6.0 6.0 6.0 6.0 10 10 10 10 10 10 10 20 20 20 20 20 20 8.5 8.5 8.5 8.5 8.5 8.5 8.5 17 17 17 17 17 17 17 18 18 18 18 45 45 45 45 45 90 90 90 90 90 90 90 80 80 80 80 80 80 80 11.0 21.0 32.0 27.5 15.0 25.0 32.0 27.5 18.0 28.0 32.0 27.5 21.0 31.0 32.0 27.5 20.0 35.0 32.0 27.5 18.5 35.5 43.0 37.5 18.5 35.5 43.0 37.5 21.5 38.5 43.0 37.5 21.5 38.5 43.0 37.5 24.0 44.0 42.0 37.5 24.0 44.0 42.0 37.5 30.0 45.0 42.0 37.5 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 30.0 45.0 57.5 52.5 35.0 50.0 57.5 52.5 35.0 50.0 57.5 52.5 45.0 45.0 57.5 52.5 70.0 65.0 57.5 52.5 MKP1848510914K2 MKP1848520914K2 MKP1848530914K2 MKP1848540914K2 MKP1848550914K2 MKP1848550914P* MKP1848560914P* MKP1848570914P* MKP1848580914P* MKP1848590914P* MKP1848610914P* MKP1848612914P* MKP1848610914Y* MKP1848612914Y* MKP1848615914Y* MKP1848620914Y* MKP1848622914Y* MKP1848625914Y* MKP1848630914Y5 MKP1848660914Y5 (7) MKP1848670914Y5 (7) MKP1848712914Y5 (8) MKP1848714914Y5 (8) 18.0 16.0 15.0 13.5 13.0 11.5 11.0 10.0 10.5 10.0 9.0 11 9.0 7.5 8.0 6.5 12.5 13.5 8 8.5 9.5 8.5 9 18.0 16.0 15.0 13.0 175 155 175 155 175 155 175 155 175 155 175 155 155 180 180 180 180 10.5 12.0 10.5 9.0 8.0 7.0 8.0 7.0 6.5 5.0 2.5 2.0 2.4 2 11.5 12.5 13.5 14.5 14.5 15 16.5 40 34.5 39.5 43.5 70 (10) 70.0 65.0 57.5 52.5 120 (10) 130.0 65.0 57.5 52.5 140 (10) 130.0 65.0 57.5 52.5 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) SPQ = Standard Packing Quantity (7) 6 pins (8) 12 pins (9) Intermediate capacitance values available on request. (10) Under release Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 287 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SPECIFIC REFERENCE DATA 1200 VDC UNDC at 85 °C = 1200 V, UOPDC at 70 °C = 1500 V, UOPDC at 105 °C = 850 V CAP. (9) DIMENSIONS (mm) (5) w h l P1 P2 Ø dt dV/dt IPEAK IRMS (A) (2) ESR (m) (3) tan  tan  10 kHz MASS SPQ 1 kHz (5) < (10-4) (4) < (10-4) (4) (g) 9.0 11.5 15.0 20.0 31 29 37 35 48 45 60 79 74 67 115 109 100 119 264 612 (pcs) 130 100 80 65 105 105 91 91 77 77 63 55 55 55 40 40 40 30 20 10 PART NUMBER (1) (µF) 1 2 3 4 5 6 7 8 9 10 12 10 12 15 20 22 25 30 60 (10) (mm) (mm) (mm) (V/µs) (A) 10.2 10.2 10.2 10.2 10.2 10.2 10.2/ 20.3 10.2 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 100 100 100 100 48 48 48 48 48 48 48 24 24 24 24 24 24 24 24 24 100 200 300 400 240 288 336 384 432 480 576 240 288 360 480 528 600 720 1440 2280 2 4 2 4 2 4 2 4 pins pins pins pins pins pins pins pins 3 5 6.5 8 6.5 7.5 8.5 9 10.5 11 13 8 9 10 13 14 15 7 8 9 9.5 11 11.5 13.5 8.5 9.5 43.0 21.5 14.5 11.0 6.0 6.0 6.0 6.0 10 10 10 10 10 10 10 18 18 18 18 18 18 8.5 8.5 8.5 8.5 8.5 8.5 8.5 16 16 16 16 16 16 16 17 17 40 40 40 40 80 80 80 80 80 80 80 70 70 70 70 70 70 70 11.0 21.0 32.0 27.5 15.0 25.0 32.0 27.5 18.0 28.0 32.0 27.5 21.0 31.0 32.0 27.5 18.5 35.5 43.0 37.5 18.5 35.5 43.0 37.5 21.5 38.5 43.0 37.5 21.5 38.5 43.0 37.5 24.0 44.0 42.0 37.5 24.0 44.0 42.0 37.5 30.0 45.0 42.0 37.5 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 35.0 50.0 57.5 52.5 35.0 50.0 57.5 52.5 35.0 50.0 57.5 52.5 45.0 45.0 57.5 52.5 70.0 65.0 57.5 52.5 MKP1848510924K2 MKP1848520924K2 MKP1848530924K2 MKP1848540924K2 MKP1848550924P* MKP1848560924P* MKP1848570924P* MKP1848580924P* MKP1848590924P* MKP1848610924P* MKP1848612924P* MKP1848610924Y* MKP1848612924Y* MKP1848615924Y* MKP1848620924Y* MKP1848622924Y* MKP1848625924Y* MKP1848630924Y5 MKP1848660924Y5 (7) MKP1848712924Y5 (8) 17.0 15.0 14.0 12.5 12.0 11.0 10.5 9.5 9.5 8.5 7.0 8.5 7.5 6.5 17.0 15.0 14.0 12.5 165 150 165 150 165 150 165 150 165 150 165 150 150 170 170 10.5 11.0 10.0 14 14.5 15.5 16.5 23 40.5 8.5 7.5 6.5 7.5 7.0 6.0 5.0 4.5 2.3 120 (10) 130.0 65.0 57.5 52.5 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan  values (5) Standard dimension (6) SPQ = Standard Packing Quantity (7) 6 pins (8) 12 pins (9) Intermediate capacitance values available on request. (10) Under release www.vishay.com 288 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. Vishay Roederstein Specific Method of Mounting to Withstand Vibration and Shock The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the figure:  Product height with seating plane as given by “IEC 60717” as reference: Wmax. P2 2 x P2 ± 0.5 mm 3 x P2 ± 0.5 mm 4 x P2 ± 0.5 mm 5 x P2 ± 0.5 mm P1 Lmax. ØD P1 (mm) 27.5 37.5 52.5 L max. (mm) l + 1.6 l + 2.0 l + 2.4 W max. (mm) w + 2.0 w + 3.0 w + 4.0 Ø D (mm) 1.2 1.5 1.7 H (mm) h + 0.2 h + 0.5 h + 0.5 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature  Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation. Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 289 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein CHARACTERISTICS Capacitance (typical curve) 4 3 2 1 ΔC/C (%) 0 RC (s) 104 105 Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Insulation resistance (typical curve) -1 -2 -3 -4 -5 -6 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb (°C) 103 0 20 40 60 80 100 Tamb (°C) Lifetime expectancy (typical curve) 1.3 1.2 1.1 UOPDC/UNDC (V) 1.0 85 °C Z (Ω) 70 °C 10 100 Impedance vs. frequency (typical curve) Pitch 27.5 mm 1 µF 1 12 µF 0.9 0.8 0.7 0.6 0.5 103 104 105 106 Lifetime expectancy (h) 105 °C 0.1 0.01 0.001 104 105 106 f (Hz) 107 Impedance vs. frequency (typical curve) 10.0 Pitch 37.5 mm 10.0 Impedance vs. frequency (typical curve) Pitch 52.5 mm 1.0 10 µF 1.0 40 µF Z (Ω) 0.1 80 µF Z (Ω) 0.1 80 µF 0.01 0.01 0.001 104 105 106 f (Hz) 107 0.001 104 105 106 f (Hz) 107 www.vishay.com 290 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Maximum IRMS current in function of the ambient temperature 1.6 1.4 IRMS operational/IRMS max. 1.2 1.0 0.8 0.6 0.4 0.2 0 50 Vishay Roederstein 60 70 80 90 100 Maximum ambient temperature (°C) 110 HEAT CONDUCTIVITY DIMENSIONS (mm) w 9.0 11.0 13.0 15.0 18.0 21.0 21.0 18.5 21.5 24.0 30.0 25.0 30.0 35.0 45.0 70.0 130.0 h 19.0 21.0 23.0 25.0 28.0 31.0 35.0 35.5 38.5 44.0 45.0 45.0 45.0 50.0 45.0 65.0 65.0 l 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 42.0 42.0 57.5 57.5 57.5 57.5 57.5 57.5 HEAT CONDUCTIVITY (mW/°C) 24 28 32 36 44 51 56 54 61 70 81 77 85 100 94 152 243 Power Dissipation and Maximum Component Temperature Rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G:  T = TC - Tamb = case temperature rise (°C) with a maximum of 15 °C at rated temperature.  P = IRMS2 x ESR = power dissipation of the component (mW)  G = heat conductivity of the component (mW/°C) Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 291 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: • The continuous peak voltage (UP+) shall not exceed the rated DC voltage rating (UNDC) • The peak-to-peak ripple voltage (UPP) shall not be greater than 0.2 x (UNDC) Non reversing recurrent waveform Voltage (V) Up+ UNDC Upt • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com • The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: dU 2 dU 2 x   ------  x dt  U NDC x  ------   dt   dt  rated 0 T T is the pulse duration www.vishay.com 292 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein Maximum Repetitive Peak Voltages The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy REPETITIVE SURGE VOLTAGE 1.1 x UNDC 1.15 x UNDC 1.2 x UNDC 1.3 x UNDC 1.5 x UNDC MAXIMUM DURATION PER DAY 30 % on load duration 30 min 5 min 1 min 110 ms INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”. SUB-CLAUSE NUMBER AND TEST ROUTINE TEST-FINAL INSPECTION 5.14.2.1 External inspection, visual examination 5.14.2.2 Dimensions 5.3.1 5.3.2 Capacitance tan  1 kHz at room temperature 1 kHz at room temperature 10 kHz at room temperature 5.5.1.2 5.7 Voltage test between terminal Insulation resistance 1.5 x UNDC at Tamb. Duration 10 s UNDC  500 V measuring voltage 100 V at room temperature UNDC  500 V measuring voltage 500 V at room temperature Duration 1 min TYPE TESTS 5.14.2 5.14.0 External inspection Initial measurements Check for finish, marking and overall dimensions Capacitance at 1 kHz tan at 10 kHz Tensile Ua1 Wire diameter section load  0.8 mm  0.5 mm2 10 N  1.25 mm  1.2 mm2 20 N Duration 10 s ± 1 s Bending Ub method 1 Wire diameter section load  0.8 mm  0.05 mm3 10 N  1.25 mm  0.019 mm3 20 N 4 x 90 °, Duration 2 s to 3 s/bend 5.14.1.6 Resistance to soldering heat IEC 60068-2-20 5.14.4 Final measurements No predrying, Method 1A Solder bath: 260 °C Duration 10 s ± 1 s Capacitance tan  C/C|  0.5 % Increase of tan   0.0050 Compared to values measured in 5.14.0 www.vishay.com 293 Legible marking and finish as specified Dimensions: see specific drawing No visible damage or puncture No flashover See specific reference data Legible marking as specified See specification drawing See specific reference data See specific reference data CONDITIONS PERFORMANCE REQUIREMENTS 5.14.1.1.4 Robustness of terminations IEC 60068-2-21 Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Vishay Roederstein SUB-CLAUSE NUMBER AND TEST 5.14.0 Initial measurements Metallized Polypropylene Film Capacitors DC Capacitor MKP Type CONDITIONS Capacitance at 1 kHz tan at 10 kHz 10 Hz to 55 Hz: amplitude ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles, 3 axes offset from each other by 90° 1 octave/min Visual examination PERFORMANCE REQUIREMENTS 5.14.3.1 Vibration IEC 60068-2-6 No visible damage 5.14.3.2 Shock or impact IEC 60068-2-6 Pulse shape: half sine Acceleration: 490 m/s2 Duration t of pulse: 11 ms Visual examination Capacitance tan  Capacitance at 1 kHz tan at 10 kHz R insulation 1.5 x UNDC at Tamb. Duration 60 s Capacitance tan  R insulation Capacitance at 1 kHz tan at 10 kHz 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) Within 5 min after the surge discharge test Duration 60 s 1.5 x UNDC at Tamb Capacitance tan at 10 kHz Capacitance at 1 kHz tan at 10 kHz 1.5 x UNDC Duration 10 s Number of clearings 5 Clearing = voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur with a max. of 2.5 x UNDC for a duration of 10 s Capacitance tan  Capacitance at 1 kHz tan at 10 kHz Test Nb Tmax. = 85 °C Tmin. = - 40 °C Transition time: 1 h, equivalent to 1 °C/min Test Ca Tmax. = 40 ± 2 °C RH = 93 ± 3 % Duration 56 days No visible damage 5.14.4 Final measurements C/C|  0.5 % Increase of tan   0.0050 Compared to values measured in 5.14.0 5.5.3.1 Initial measurements 5.5.3.2 5.5.3.3 Voltage test between terminal Final measurements C/C|  0.5 % Increase of tan   1.2 initial tan  + 0.0001 R insulation  50 % of specified values 5.9.1 5.9.2 Initial measurements Surge discharge test 5.9.3 Voltage test between terminal 5.9.3 Final measurements C/C|  1.0 % tan   1.2 initial tan  + 0.0001 Compared to values measured in 5.9.1 5.11.1 5.11.2 Initial measurements Self healing test 5.11.3 Final measurements C/C|  0.5 % tan   1.2 x initial tan + 0.0001 Compared to values measured in 5.11.1 5.13.0 5.13.1 Initial measurements Change of temperature acc. to IEC 60068-2-14 5.13.2 Damp heat steady state Acc. to IEC 60068-2-78 www.vishay.com 294 For technical questions, contact: dc-film@vishay.com Document Number: 28164 Revision: 27-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SUB-CLAUSE NUMBER AND TEST 5.5.3.2 5.13.3 Voltage test between terminal Final measurements CONDITIONS 1.5 x UNDC at ambient temperature Duration 60 s Visual examination Capacitance tan at 1 URMS 10 kHz 5.10.0 5.10.1 Initial measurements Thermal stability test under overload conditions Capacitance at 1 kHz tan at 10 kHz Natural cooling Tamb ± 5 °C 1.21 x Pmax. = (U2/2) x W2 x C x tan  = 121 x (I2 max./W2 x c) x tan 2 with W2 = 2 x p x f2 for Imax. (see specific reference data) f2 = 10 kHz Duration 48 h Measure the temperature every 1.5 h during the last 6 h Capacitance tan at 10 kHz Impedance analyser at Tamb No puncturing or flashover Self healing punctures are permitted C/C|  2.0 % Increase of tan   0.0150 Compared to values measured in 5.13.0 Vishay Roederstein PERFORMANCE REQUIREMENTS 5.10.2 Final measurements temperature rise < 1 °C C/C|  2 % Increase of tan   1.2 x initial + 0.0150 < 0.9 times the value as specified in typical curve “Resonant frequency” of this specification 5.12 Resonance frequency measurement Initial measurements Endurance test between terminals 5.10.0 5.15.1 Capacitance at 1 kHz tan at 10 kHz Sequence 1.4 x UNDC at Tmax. = 85 °C 1.4 x UOPDC at 105 °C Duration 250 h 1000 x discharge at 1.4 x I (maximum repetitive peak current in continuous operation) 1.4 x UNDC at Tmax. = 85 °C 1.4 x UOPDC at 105 °C Duration 250 h Capacitance tan  Capacitance at 1 kHz at Tmax. = 85 °C Product enveloped with chees cloth 3 x UNDC or DC voltage Until repetitive product healings occur Duration = 15 min ACRMS voltage = UNDC x 2 2 with minimum of 250 VAC Duration = 5 min Repeat destruction sequence 3 x Visual examination No puncturing or flashover Self healing punctures are permitted 5.15.2 Final measurements C/C|  3 % Increase of tan   0.0150 Compared to values measured in 5.15.0 5.16.3.0 Initial measurements 5.16.3.1 Destruction test sequence High DC voltage test Audible healings or check healings with oscilloscope High AC voltage test 5.16.3.2 Final measurements Document Number: 28164 Revision: 27-May-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 295 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1