MMBZ4683-V

MMBZ4681-V to MMBZ4717-V www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar Zener diodes 3 • Standard Zener voltage tolerance is ± 5 %. Other tolerances are available upon request • These diodes are also available in DO-35 case with the type designation 1N4681 to 1N4717 and SOD-123 case with the type designation MMSZ4681-V to MMSZ4717-V • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC UNIT V mA 1 2 PRIMARY CHARACTERISTICS PARAMETER VZ range nom. Test current IZT VZ specification Int. construction VALUE 2.4 to 43 0.05 Pulse current Single ORDERING INFORMATION DEVICE NAME MMBZ4681-V to MMBZ4717-V MMBZ4681-V to MMBZ4717-V ORDERING CODE MMBZ4681-V to MMBZ4717-V-series-GS18 MMBZ4817-V to MMBZ4717-V-series-GS08 TAPED UNITS PER REEL 10 000 (8 mm tape on 13" reel) 3000 (8 mm tape on 7" reel) MINIMUM ORDER QUANTITY 10 000/box 15 000/box PACKAGE PACKAGE NAME SOT-23 WEIGHT 8.8 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction temperature, maximum Storage temperature range TEST CONDITION On FR - 5 board using recommended solder pad layout See table “Characteristics” On FR - 5 board using recommended solder pad layout RthJA Tj Tstg 420 150 - 55 to + 150 K/W °C °C SYMBOL Ptot VALUE 350 UNIT mW Rev. 1.7, 29-Nov-11 Document Number: 85771 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ4681-V to MMBZ4717-V www.vishay.com Vishay Semiconductors TEST CURRENT IZT1 mA MAX. 2.52 2.84 3.15 3.47 3.78 4.1 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.14 9.56 10.5 11.6 12.6 13.7 14.7 15.8 16.8 17.9 18.9 20 21 23.1 25.2 26.3 28.4 29.4 31.5 34.7 3.7.8 41 45.2 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 μA MAX. 2 1 0.8 7.5 7.5 5 4 10 10 10 10 10 10 1 1 1 1 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 1 1 1 1.5 2 2 2 3 3 4 5 5.1 5.7 6.2 6.6 6.9 7.6 8.4 9.1 9.8 10.6 11.4 12.1 12.9 13.6 14.4 15.2 16.7 18.2 19 20.4 21.2 22.8 25 27.3 29.6 32.6 VOLTAGE CHANGE (2)  VZ V V MAX. 0.8 0.85 0.9 0.95 0.95 0.97 0.99 0.99 0.97 0.96 0.95 0.9 0.75 0.5 0.1 0.08 0.1 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.2 0.22 0.24 0.25 0.27 0.28 0.3 0.33 0.36 0.39 0.43 ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE MIN. MMBZ4681-V MMBZ4682-V MMBZ4683-V MMBZ4684-V MMBZ4685-V MMBZ4686-V MMBZ4687-V MMBZ4688-V MMBZ4689-V MMBZ4690-V MMBZ4691-V MMBZ4692-V MMBZ4693-V MMBZ4694-V MMBZ4695-V MMBZ4696-V MMBZ4697-V MMBZ4698-V MMBZ4699-V MMBZ4700-V MMBZ4701-V MMBZ4702-V MMBZ4703-V MMBZ4704-V MMBZ4705-V MMBZ4706-V MMBZ4707-V MMBZ4708-V MMBZ4709-V MMBZ4710-V MMBZ4711-V MMBZ4712-V MMBZ4713-V MMBZ4714-V MMBZ4715-V MMBZ4716-V MMBZ4717-V CF CH CJ CK CM CN CP CT CU CV CA CX CY CZ DC DD DE DF DH DJ DK DM DN DP DT DU DV DA DZ DY EA EC ED EE EF EH EJ 2.28 2.57 2.85 3.14 3.42 3.71 4.09 4.47 4.85 5.32 5.89 6.46 7.13 7.79 8.27 8.65 9.5 10.5 11.4 12.4 13.3 14.3 15.2 16.2 17.1 18.1 19 20.9 22.8 23.8 25.7 26.6 28.5 31.4 34.2 37.1 40.9 VZ at IZT1 V NOM. 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 REVERSE CURRENT IR at VR Notes • Maximum VF = 0.9 V, at IF = 10 mA (1) Tested with pulse test current (2) Maximum voltage change (V ). Voltage change is equal to the difference between V at 100 μA and V at 10 μA. Z Z Z Rev. 1.7, 29-Nov-11 Document Number: 85771 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ4681-V to MMBZ4717-V www.vishay.com BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 15 Vishay Semiconductors Ptot - Total Power Dissipation (mW) 600 500 400 300 200 100 0 0 80 120 160 200 40 Tamb - Ambient Temperature (°C) TKVZ - Temperature Coefficient of VZ (10-4/K) 10 5 IZ = 5 mA 0 -5 0 95 9600 10 20 30 40 50 95 9602 VZ - Z-Voltage (V) Fig. 1 - Total Power Dissipation vs. Ambient Temperature Fig. 4 - Temperature Coefficient of VZ vs. Z-Voltage 1000 100 VZ - Voltage Change (mV) IF - Forward Current (mA) Tj = 25 °C 100 10 Tj = 25 °C 1 IZ = 5 mA 10 0.1 0.01 1 0 95 9598 0.001 5 10 15 20 25 95 9605 0 0.2 0.4 0.6 0.8 1.0 VZ - Z-Voltage (V) VF - Forward Voltage (V) Fig. 2 - Typical Change of Working Voltage under Operating Conditions at Tamb = 25 °C Fig. 5 - Forward Current vs. Forward Voltage 1.3 100 VZtn = VZt/VZ (25 °C) VZtn - Relative Voltage Change 1.2 1.1 8 x 10-4/K 6 x 10-4/K 4 x 10-4/K 2 x 10-4/K IZ - Z-Current (mA) TKVZ = 10 x 10-4/K 80 Ptot = 500 mW Tamb = 25 °C 60 1.0 0.9 0 - 2 x 10-4/K - 4 x 10-4/K 40 20 0.8 - 60 95 9599 0 0 60 120 180 240 95 9604 0 4 6 8 12 20 Tj - Junction Temperature (°C) VZ - Z-Voltage (V) Fig. 3 - Typical Change of Working Voltage vs. Junction Temperature Fig. 6 - Z-Current vs. Z-Voltage Rev. 1.7, 29-Nov-11 Document Number: 85771 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ4681-V to MMBZ4717-V www.vishay.com Vishay Semiconductors 1000 Ptot = 500 mW Tamb = 25 °C 50 40 rZ - Differential Z-Resistance (Ω) IZ - Z-Current (mA) IZ = 1 mA 100 30 5 mA 10 10 mA 20 10 0 15 95 9607 1 20 25 30 35 95 9606 Tj = 25 °C 0 5 10 15 20 25 VZ - Z-Voltage (V) VZ - Z-Voltage (V) Fig. 7 - Z-Current vs. Z-Voltage Fig. 8 - Differential Z-Resistance vs. Z-Voltage PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) 2.6 (0.102) 2.35 (0.093) 0.45 (0.018) 1.43 (0.056) 1.20 (0.047) 0.35 (0.014) 0.7 (0.028) 0.95 (0.037) 3.1 (0.122) 2.8 (0.110) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 0.175 (0.007) 0.098 (0.004) 0.2 (0.008) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.3 (0.012) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1 (0.039) 0.9 (0.035) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.7, 29-Nov-11 Document Number: 85771 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0.9 (0.035) 0° t 0.5 (0.020) o8 ° 0.9 (0.035) Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000