MO-220

Package Information Vishay Siliconix PowerPAKr MLP44-16 (POWER IC ONLY) JEDEC Part Number: MO-220 D -BD/2 AA 4 aaa C 2 X aaa C 2 X // Nx ccc C 9 0.08 C A A1 NL D2 6 (NE-1) x e 2 1 N N-1 Detail A (ND-1) x e 8 Bottom View Document Number: 72802 16-May-05 ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ Top View Side View A3 D2/2 Index Area (D 2 E 2) E/2 E BB -ADD Detail A CC Seating Plane -C- Detail B Datum A or B Nr E2/2 E2 Terminal Tip Exposed Pad Nb 5 e Even Terminal/Side Detail B Odd Terminal/Side 8 e/2 5 e Terminal Tip 5 bbb M C A B www.vishay.com 1 Package Information Vishay Siliconix PowerPAKr MLP44-16 (Power IC Only) JEDEC Part Number: MO-220 MILLIMETERS* Dim Min Nom Max 1.00 0.05 − − − − 0.35 − − − 2.8 − 2.8 0.5 − − − INCHES Min 0.0315 0 − − − − 0.0098 − − − 0.1004 − 0.1004 0.0118 − − b(min)/2 Nom 0.0354 0.0008 0.0079 0.0136 0.0059 0.0136 0.0118 0.0039 0.0071 0.0039 0.1575 BSC 0.1063 0.0071 0.1575 BSC 0.1063 0.0256 BSC 0.0157 16 4 4 − Max 0.0394 0.0020 − − − − 0.138 − − − 0.1102 − 0.1102 0.0197 − − − Notes A 0.80 0.90 A1 0 0.02 A3 − 0.20 Ref AA − 0.345 aaa − 0.15 BB − 0.345 b 0.25 0.30 bbb − 0.10 CC − 0.18 ccc − 0.10 D 4.00 BSC D2 2.55 2.7 DD − 0.18 E 4.00 BSC E2 2.55 2.7 e 0.65 BSC L 0.3 0.4 N 16 ND − 4 NE − 4 r b(min)/2 − * Use millimeters as the primary measurement. ECN: S-50794—Rev. B, 16-May-05 DWG: 5905 5 3, 7 6 6 NOTES: 1. 2. 3. 4. Dimensioning and tolerancing conform to ASME Y14.5M-1994. All dimensions are in millimeters. All angels are in degrees. N is the total number of terminals. The terminal #1 identifier and terminal numbering convention shall conform to JESD 95-1 SPP-012. Details of terminal #1 identifier are optional, but must be located within the zone indicated. The terminal #1 identifier may be either a molded or marked feature. The X and Y dimension will vary according to lead counts. Dimension b applies to metallized terminal and is measured between 0.25 mm and 0.30 mm from the terminal tip. ND and NE refer to the number of terminals on the D and E side respectively. Depopulation is possible in a symmetrical fashion. Variation HHD is shown for illustration only. Coplanarity applies to the exposed heat sink slug as well as the terminals. 5. 6. 7. 8. 9. www.vishay.com 2 Document Number: 72802 16-May-05