MUR160

New Product MUR140 & MUR160 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency DO-204AC (DO-15) • High forward surge capability • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-204AC (DO-15) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 1.0 A 400 V, 600 V 35 A 50 ns 1.05 V 175 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TA = 120 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL VRRM VRWM VDC IF(AV) IFSM TJ, TSTG MUR140 400 400 400 1.0 35 - 65 to + 175 °C MUR160 600 600 600 UNIT V V V A A °C Document Number: 88684 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product MUR140 & MUR160 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum instantaneous reverse current at rated DC blocking voltage (1) Maximum reverse recovery time Maximum reverse recovery time Maximum forward recovery time Note: (1) Pulse test: 300 µs pulse width, duty cycle ≤ 2 % TEST CONDITIONS IF = 1.0 A TJ = 25 °C TJ = 150 °C TJ = 25 °C TJ = 150 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 10 % IRM IF = 1.0 A, dI/dt = 100 A/µs, recovery to 1.0 V SYMBOL VF MUR140 1.25 1.05 5.0 150 50 75 50 MUR160 UNIT V IR trr trr tfr µA ns ns ns THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance junction to ambient (1) Note: (1) Lead length = 3/8" on P.C. Board with 1.5" x 1.5" copper surface SYMBOL RθJA MUR140 50 MUR160 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N MUR160-E3/54 MUR160-E3/73 UNIT WEIGHT (g) 0.41 0.41 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 4000 2000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 50 L = 3/8" Average Forward Rectified Current (A) Peak Forward Surge Current (A) 40 2.0 P.C.B. with 1.5 x 1.5" Copper Pads 30 20 1.0 10 0 0 25 50 75 100 125 150 175 0 1 10 100 Ambient Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88684 Revision: 20-Aug-07 New Product MUR140 & MUR160 Vishay General Semiconductor 100 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 150 °C 1 TJ = 175 °C Junction Capacitance (pF) 1.2 1.4 1.6 1.8 10 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 1000 Instantaneous Reverse Leakage Current (µA) 100 TJ = 175 °C TJ = 150 °C 10 1 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88684 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1