MURB1620CT

MURB1620CT/MURB1620CT-1 Vishay High Power Products Ultrafast Rectifier, 2 x 8 A FRED PtTM FEATURES MURB1620CT MURB1620CT-1 • Ultrafast recovery time • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature Base common cathode 2 Base common cathode 2 • Designed and qualified for industrial level DESCRIPTION/APPLICATIONS MUR.. series are the state of the art ultrafast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, dc-to-dc converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. 1 2 3 Anode 2 1 2 3 Anode 2 Anode Common 1 cathode Anode Common 1 cathode D2PAK TO-262 PRODUCT SUMMARY trr IF(AV) VR 25 ns 2x8A 200 V ABSOLUTE MAXIMUM RATINGS PARAMETER Peak repetitive reverse voltage Average rectified forward current per leg total device SYMBOL VRRM IF(AV) IFSM IFM TJ, TStg Rated VR, square wave, 20 kHz, TC = 150 °C TEST CONDITIONS MAX. 200 8.0 Rated VR, TC = 150 °C 16 100 16 - 65 to 175 °C A UNITS V Non-repetitive peak surge current per leg Peak repetitive forward current per leg Operating junction and storage temperatures ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF IR = 100 µA IF = 8 A IF = 8 A, TJ = 150 °C VR = VR rated TJ = 150 °C, VR = VR rated VR = 200 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 200 TYP. 25 8.0 MAX. 0.975 0.895 5 250 µA pF nH V UNITS Reverse leakage current Junction capacitance Series inductance IR CT LS Document Number: 93940 Revision: 28-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 MURB1620CT/MURB1620CT-1 Vishay High Power Products Ultrafast Rectifier, 2 x 8 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1.0 A, dIF/dt = 50 A/µs, VR = 30 V Reverse recovery time trr IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Qrr TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C IF = 8 A dIF/dt = 200 A/µs VR = 160 V MIN. TYP. 20 34 1.7 4.2 23 75 MAX. 35 25 A ns UNITS Reverse recovery charge nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg Thermal resistance, junction to ambient per leg Thermal resistance, case to heatsink Weight Mounting torque Marking device Case style D2PAK Case style TO-262 SYMBOL TJ, TStg RthJC RthJA RthCS Mounting surface, flat, smooth and greased TEST CONDITIONS MIN. - 65 6.0 (5.0) TYP. 0.5 2.0 0.07 MAX. 175 3.0 50 12 (10) g oz. kgf · cm (lbf · in) °C/W UNITS °C MURB1620CT MURB1620CT-1 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93940 Revision: 28-Jul-08 MURB1620CT/MURB1620CT-1 Ultrafast Rectifier, 2 x 8 A FRED PtTM Vishay High Power Products 100 100 Reverse Current - I R (μA) 10 T J = 175˚C 150˚C 1 125˚C 100˚C 0.1 25˚C 0.01 Instantaneous Forward Current - I F (A) 10 0.001 T = 175˚C J 0 50 100 150 200 250 TJ = 150˚C TJ = 25˚C Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 Junction Capacitance - C T (pF) 1 T = 25˚C J 100 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - VF (V) 1.8 10 1 10 100 1000 Reverse Voltage - VR (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 (°C/W) 1 Thermal Impedance Z D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Notes: thJC PDM t1 t2 0.1 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/t 2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93940 Revision: 28-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 MURB1620CT/MURB1620CT-1 Vishay High Power Products Ultrafast Rectifier, 2 x 8 A FRED PtTM 60 180 Allowable Case Temperature (°C) I F = 30 A I F = 15 A IF = 8 A 50 170 DC 150 Square wave (D = 0.50) Rated Vr applied trr ( ns ) 160 40 30 140 see note (1) 20 130 0 3 6 9 12 10 100 Average Forward Current - IF(AV) (A) VR = 160V TJ = 125˚C TJ = 25˚C 1000 di F /dt (A/μs ) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 200 10 Average Power Loss ( Watts ) VR = 160V TJ = 125˚C TJ = 25˚C 160 8 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 I F = 30 A I F = 15 A IF = 8 A 4 RMS Limit DC Qrr ( nC ) 6 120 80 2 40 0 0 3 6 9 12 0 100 di F /dt (A/μs ) Average Forward Current - IF(AV) (A) 1000 Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93940 Revision: 28-Jul-08 MURB1620CT/MURB1620CT-1 Ultrafast Rectifier, 2 x 8 A FRED PtTM VR = 200 V Vishay High Power Products 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under cur ve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 93940 Revision: 28-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 MURB1620CT/MURB1620CT-1 Vishay High Power Products ORDERING INFORMATION TABLE Ultrafast Rectifier, 2 x 8 A FRED PtTM Device code MUR 1 B 2 16 3 20 4 CT 5 -1 6 TRL 7 8 1 2 3 4 5 6 7 - Ultrafast MUR series B = D2PAK/TO-262 Current rating (16 = 16 A) Voltage rating (20 = 200 V) CT = Center tap (dual) None = D2PAK -1 = TO-262 - None = Tube (50 pieces) TRL = Tape and reel (left oriented, for D2PAK only) TRR = Tape and reel (right oriented, for D2PAK only) 8 - None = Standard production PbF = Lead (Pb)-free (for TO-262 and D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL) LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 93940 Revision: 28-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1