P10LXXAG503MB4

P10L Vishay Sfernice Long Life Potentiometer - 500 000 Cycles Miniature - Cermet - Fully Sealed FEATURES • 500 000 cycles • Low temperature coefficient (± 150 ppm/°C typical) • Plastic housing and shaft • Compact (3/8" square) • Fully sealed RoHS COMPLIANT DIMENSIONS in millimeters (inches) (± 0.5 mm) P10L: Side Adjust P10L: Top Adjust AI = 20 (0.79) AG = 16 (0.63) 9.6 (0.38) 3 x Ø 0.5 (0.02) 5.2 (0.20) 5.3 (0.21) 5.5 (0.22) Ø3 (0.12) P10LXX 9.7 (0.38) 3 x Ø 0.5 (0.02) 1 2 3 4 Min. (0.16) 5.5 (0.22) 2.54 (0.10) 1.15 (0.05) 2.54 (0.10) AI = 20 (0.79) AG = 16 (0.63) Ø3 (0.12) 9.7 (0.38) M6 x 0.75 1 (0.04) 0.6 (0.02) 2.54 (0.10) 0.6 (0.02) 4 Min. (0.16) 1 (0.04) 9.6 (0.38) 2.54 (0.10) 5.2 5.3 (0.20) (0.21) M6 x 0.75 1 3 2 P10LYP 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) P10LXC 2.7 (0.11) 1 2 3 2.54 (0.10) 2 2.54 (0.10) 3 4.85 (0.19) P10LYE 1 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 1 3 5.08 (0.20) 2 P10LYM 2.54 (0.10) 2.54 (0.10) 2.25 (0.09) Document Number: 51057 Revision: 10-Dec-07 For technical questions, contact: sfer@vishay.com www.vishay.com 1 P10L Vishay Sfernice Long Life Potentiometer - 500 000 Cycles Miniature - Cermet - Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Standard Resistance Values Tolerance Linear OUTPUT VOLTAGE RATIO (%) CERMET 250° ± 15° 1 kΩ - 5 kΩ - 10 kΩ - 50 kΩ 20 % - 10 % on request A 100 80 60 40 20 CIRCUIT DIAGRAM Varation Law a (1) b (2) cw c (3) A 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION LIN. LAW “A” 0.1 Power Rating 0.1 W at 70 °C POWER IN W 0 0 20 40 60 70 80 100 120 140 AMBIENT TEMPERATURE IN °C Resistance Value (kΩ) Standard Resistance Element Data 1 5 10 50 Max. Power at 70 °C (W) 0.1 0.1 0.1 0.1 Max. Working Voltage (V) 10 22.3 31.6 70.7 Temperature Coefficient (Typical) Limiting Element Voltage Contact Resistance Variation End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance (300 VDC) Independent Linearity (Typical) ± 150 ppm/°C 75 V 1 % Rn or 2 Ω 1Ω 1000 V 106 MΩ ±5% www.vishay.com 2 For technical questions, contact: sfer@vishay.com Document Number: 51057 Revision: 10-Dec-07 P10L Long Life Potentiometer - 500 000 Cycles Miniature - Cermet - Fully Sealed MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (Typical) End Stop Torque Tightening Torque of Mounting Nut Unit Weight Terminals 2 Ncm max. 7 Ncm max. 25 Ncm max. 1g e3: pure Sn 290° ± 5 2.83 oz.-inch max. 9.9 oz.-inch max. 2.2 lb-inch max. 3.5 10-2 oz. Vishay Sfernice ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 40 °C to 100 °C 40/100/56 Fully sealed - Container IP67 MARKING • VISHAY trademark • Model • Ohmic Value code • Tolerance code • Manufacturing date code • Marking of terminals 3 APPLICATION NOTE c (3) The potentiometer shall be used in voltage divider with an impedance load at least 100 times higher than the total potentiometer nominal resistance value. cw Advised load impedance: 1 MΩ min. for resistance range of 1kΩ to 50 kΩ (1) a (2) b 1 MΩ min. Document Number: 51057 Revision: 10-Dec-07 For technical questions, contact: sfer@vishay.com www.vishay.com 3 P10L Vishay Sfernice Long Life Potentiometer - 500 000 Cycles Miniature - Cermet - Fully Sealed PERFORMANCES TYPICAL VALUES AND DRIFTS TESTS CONDITIONS ΔRT/RT (%) ΔR1-2/R1-2 (%) OTHER Climatic Sequence Phase A dry heat 100 °C Phase B damp heat Phase C cold - 40 °C Phase D damp heat 5 cycles 56 days 40 °C 93 % HR 500 000 cycles at rated power Turn angle: ± 50° 33 cycles per min Temperature: 20 °C 1000 h at rated power 90'/30' Ambient temperature 70 °C 5 cycles - 40 °C at 100 °C 50 g at 11 ms 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g in 3 directions ±1% ±2% - Long Term Damp Heat ±1% ±2% Insulation resistance > 104 MΩ Contact resistance variation max. 35 % Independent linearity ± 20 % Contact resistance variation max. 30 % Rotational Life ± 20 % - Load Life ± 20 % ± 20 % Rapid Temperature Change ±1%