P10YMR

P10 Vishay Sfernice 3/8" Square Potentiometers Cermet Fully Sealed FEATURES • Industrial Grade • 0.5 W at 70 °C • Miniature compact • Plastic housing and shaft • Fully sealed P10 panel potentiometer combines the very good setting stability offered by VISHAY SFERNICE trimmers (due to their proprietary multifinger wiper), with a mechanical life of 10 000 cycles. It is an ideal choice to set and control parameters such as temperature, time, volume levels, etc. • 7 standard pin styles • 10 000 cycles rotational life RoHS COMPLIANT DIMENSIONS in millimeters P10 side adjust P10XX 5.2 5.3 1.15* 2.54* 9.6 2.54* 2.54* 4 min AG = D = 16 AI = R = 20 P10 top adjust 9.6 5.5 9.7 ø 0.5 5.2 5.3 AG = D = 16 AI = R = 20 ø 0.5 3 2 1 9.7 5.5 ø3 4 min M 6 × 0.75 ø3 P10XH 1.15* 1 2 3 P10YP 2.54* 1 2 3 2.54* 2.54* 2.54* 2.54* 2.54* 2.54* P10XC 2.7* 3 2 1 2 1 3 P10YE 2.54* 4.85 2.54* 2.54* 2.54* 2.54* P10XW 2.7* 1 2 3 P10YM 2.54* 1 2 3 5.08* 2.25* 2.54* 2.54* 2.54* * to be measured at base level CIRCUIT DIAGRAM a (1) b (2) cw c (3) Tolerance unless otherwise specified ± 0.5 www.vishay.com 108 For technical questions, contact: sfer@vishay.com Document Number: 51030 Revision: 02-Jul-07 P10 3/8" Square Potentiometers Cermet Fully Sealed Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard series Tolerance Power Rating Temperature Coefficient Limiting Element Voltage (Linear Law) Contact Resistance Variation End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance Standard On Request Linear Logarithmic cermet 250° ± 15° 100 Ω to 2 MΩ 1-2-5 ± 10 % ±5% 0.5 W at + 70 °C not applicable See Standard Resistance Element Table 250 V 1 % Rn or 2 Ω 1Ω 1000 V 106 MΩ MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Tightening Torque (max. Ncm) Unit Weight (max. g) 290° ± 5° 2 7 25 1 POWER RATING CHART 0.5 POWER IN W 0 0 25 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 125 °C 55/100/56 fully sealed container IP67 50 70 100 125 155 AMBIENT TEMPERATURE IN °C PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS CONDITIONS 1000 hours at rated power 90’/30’ - ambient temperature 70 °C Phase A dry heat 100 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles 56 days 40 °C, 93 % RH 5 cycles - 55 °C at + 125 °C 50 g at 11 m secs 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g during 6 hours 10 000 cycles ΔRT (%) RT ±1% Contact res. variation: < 1 % Rn ΔR1-2 (%) R1-2 ±2% Load Life Climatic Sequence ±1% ±2% ±1% Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ ±1% ΔV1-2 V1-3 ±2% Long Term Damp Heat Rapid Temperature Change ≤±2% Shock ± 0.5 % ΔV1-2 V1-3 ±1% Vibration ± 0.5 % ±3% Contact res. variation: < 2 % Rn ≤±1% Rotational Life Document Number: 51030 Revision: 02-Jul-07 For technical questions, contact: sfer@vishay.com www.vishay.com 109 P10 Vishay Sfernice 3/8" Square Potentiometers Cermet Fully Sealed STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES Ω 100 200 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M 2M 0.5 0.28 0.13 0.06 0.028 TYPICAL TCR MAX. MAX. MAX. CUR. - 55 °C POWER WORKING THROUGH + 125 °C AT 70 °C VOLTAGE WIPER W 0.5 V 7.0 10.0 15.8 22.4 31.8 50.0 70.7 100 158 224 250 250 250 250 mA 70 50 32 22 16 10 7.0 5.0 3.2 2.2 1.3 0.5 0.25 0.13 ± 150 ppm/°C LINEAR LAW MARKING Printed: – VISHAY trademark – model – ohmic value – manufacturing date – pin 3 The ohmic value is indicated by a 3 figures code: the first two digits are significant figures, the third digit is the multiplier: Example: 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω The manufacturing date is indicated by a 4 figures code. The first two digits are the year, the last two digits are the week. SHAFTS Standard shaft 20 mm length (R or AI code) and 16 mm length (D or AG code) is measured from the mounting face to the free end of the shaft. Vishay guarantee is lost if the customer modifies the shaft himself. HARDWARE Nuts and washer are supplied seperately (not mounted on the potentiometer) in a small bag placed in the packaging. PACKAGING – Carton boxes of 100 pieces ORDERING INFORMATION P10 MODEL XX VERSION XX YP XH YE XC YM XW R AXE R = AI = 20 mm D = AG = 16 mm 500 kΩ OHMIC VALUE ± 10 % TOLERANCE BO100 PACKAGING e3 LEAD FINISH e3: pure Sn SAP PART NUMBERING GUIDELINES P 1 0 X X A I 5 0 4 K B 3 0 MODEL STYLE SHAFT OHMIC VALUE TOL PACKAGING CODE SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables www.vishay.com 110 For technical questions, contact: sfer@vishay.com Document Number: 51030 Revision: 02-Jul-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1