P2SMA140A

New Product P2SMA130A thru P2SMA220A Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional 200 W peak pulse power capability with a 10/1000 μs waveform • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AC (SMA) PRIMARY CHARACTERISTICS VBR PPPM PD TJ max. 130 V to 220 V 200 W 0.5 W 150 °C • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end per TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) Peak pulse current with a 10/1000 μs waveform (fig. 3) Power dissipation at TA = 25 °C (fig. 6) Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal SYMBOL PPPM (1)(2) VALUE 200 See next table 0.5 - 55 to + 150 UNIT W A W °C IPPM (1) PD TJ, TSTG Document Number: 89376 Revision: 20-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product P2SMA130A thru P2SMA220A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE MARKING CODE 2VK 2VL 2VM 2VN 2VP 2VQ 2VR BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. P2SMA130A P2SMA140A P2SMA150A P2SMA170A P2SMA180A P2SMA200A P2SMA220A 124 133 143 162 171 190 209 MAX. 137 147 158 179 189 210 231 1.0 1.0 1.0 1.0 1.0 1.0 1.0 111 119 128 145 154 171 185 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (1) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) 1.11 1.04 0.97 0.85 0.81 0.73 0.61 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 179 192 207 234 246 274 328 MAXIMUM TEMPERATURE OF VBR (%/°C) 0.140 0.140 0.140 0.150 0.150 0.150 0.150 DEVICE TYPE Notes (1) Pulse test: t  50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Thermal resistance, junction to ambient air Thermal resistance, junction to mount Note (1) Mounted on minimum recommended pad layout SYMBOL RJA RJM (1) (1) VALUE 250 50 UNIT °C/W °C/W ORDERING INFORMATION (Example) PREFERRED P/N P2SMA130A-M3/61T P2SMA130A-M3/5AT UNIT WEIGHT (g) 0.064 0.064 PREFERRED PACKAGE CODE 61T 5AT BASE QUANTITY 1800 7500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 10 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 1000 10 000 100 PPPM - Peak Pulse Power (kW) 75 1 50 0.1 0.2" x 0.2" (5.0 mm x 5.0 mm) off Voltage, VWM Copper Pad Areas 0.01 0.1 1 10 100 25 0 0 25 50 75 100 125 150 175 td - Pulse Width (μs) TJ - Initial Temperature (°C) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Derating Curve www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89376 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 20-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product P2SMA130A thru P2SMA220A Vishay General Semiconductor 150 Peak Value IPPM 100 Half Value - IPP IPPM 2 Transient Thermal Impedance (°C/W) IPPM - Peak Pulse Current, % IRSM tr = 10 μs tr = 8 μs TJ = 25 °C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50 % of IPPM 1000 100 50 td = 1000 μs td = 20 μs td 10 0 0 1.0 2.0 3.0 4.0 1 0.01 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform PM(av) - Steady State Power Dissipation (W) Fig. 5 - Typical Transient Thermal Impedance 100 0.6 FR-4 Board, on Minimum Recommended Pad Layout CJ - Junction Capacitance (pF) Measured at Zero Bias 0.5 0.4 10 0.3 Measured at Stand-off Voltage VWM 0.2 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1 120 130 140 150 160 170 180 190 200 210 200 0.1 0 0 25 50 75 100 125 150 175 VWM - Reverse Stand-Off Voltage (V) TA - Ambient Temperature (°C) Fig. 4 - Typical Junction Capacitance Fig. 6 - Power Derating Curve PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.066 (1.68) MIN. 0.074 (1.88) MAX. 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 89376 Revision: 20-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1