P6KA6.8_11

P6KA6.8 thru P6KA43A Vishay General Semiconductor PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Junction passivation optimized design passivated anisotropic rectifier technology • TJ = 185 °C capability suitable for high reliability and automotive requirement • Available in uni-directional polarity only DO-204AC (DO-15) • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time PRIMARY CHARACTERISTICS VBR PPPM PD IFSM TJ max. 6.8 V to 43 V 600 W 5.0 W 75 A 185 °C • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: DO-204AC, molded epoxy over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 µs (1) (fig. 1) Pulse pulse current with a 10/1000 µs waveform (1) (fig. 3) Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) Peak forward surge current, 8.3 ms single half sine-wave (2) Maximum instantaneous forward voltage at 50 A (2) SYMBOL PPPM IPPM PD IFSM VF TJ, TSTG VALUE 600 See next table 5.0 75 3.5 - 65 to + 185 UNIT W A W A V °C Operating junction and storage temperature range Notes (1) (2) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 per minute maximum Document Number: 88368 Revision: 09-Feb-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 P6KA6.8 thru P6KA43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN VOLTAGE DEVICE TYPE VBR (1) AT IT (V) MIN. P6KA6.8 P6KA6.8A P6KA7.5 P6KA7.5A P6KA8.2 P6KA8.2A P6KA9.1 P6KA9.1A P6KA10 P6KA10A P6KA11 P6KA11A P6KA12 P6KA12A P6KA13 P6KA13A P6KA15 P6KA15A P6KA16 P6KA16A P6KA18 P6KA18A P6KA20 P6KA20A P6KA22 P6KA22A P6KA24 P6KA24A P6KA27 P6KA27A P6KA30 P6KA30A P6KA33 P6KA33A P6KA36 P6KA36A P6KA39 P6KA39A P6KA43 P6KA43A Notes Pulse test: tp  50 ms Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (1) (2) TEST CURRENT IT (A) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAX. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 STANDOFF VOLTAGE VWM (V) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 Maximum Reverse Leakage at VWM ID (µA) 500 500 250 250 100 100 25 25 10 10 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 TJ = 150 °C Maximum Reverse Leakage at VWM ID (µA) 1000 1000 500 500 200 200 50 50 20 20 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 PEAK PULSE CURRENT IPPM (2) (A) 55.6 57.1 51.3 53.1 48.0 49.6 43.5 44.8 40.0 41.4 37.0 38.5 34.7 35.9 31.6 33.0 27.3 28.3 25.5 26.7 22.6 23.8 20.6 21.7 18.8 19.6 17.3 18.1 15.3 16.0 13.8 14.5 12.6 13.1 11.5 12.0 10.6 11.1 9.7 10.1 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.6 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 MAXIMUM TEMP. COEFFICIENT OF VBR (%/°C) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.076 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.080 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 88368 Revision: 09-Feb-11 P6KA6.8 thru P6KA43A Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N P6KA6.8AHE3/54 (1) Note (1) UNIT WEIGHT (g) 0.415 PREFERRED PACKAGE CODE 54 BASE QUANTITY 4000 DELIVERY MODE 13" diameter paper tape and reel AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 150 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 1 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 100 6000 CJ - Junction Capacitance (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 75 Measured at Zero Bias 50 100 Measured at Stand-Off Voltage, VWM 25 0 0 25 50 75 100 125 150 175 200 10 1.0 10 100 200 TJ - Initial Temperature (°C) VBR - Breakdown Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance Document Number: 88368 Revision: 09-Feb-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 P6KA6.8 thru P6KA43A Vishay General Semiconductor 6 5 60 Hz Resistive or Inductive Load 200 PPP - Peak Forward Surge Current (A) TL = 75 °C 8.3 ms Single Half Sine-Wave 100 PD - Power Dissipation (W) 4 3 L = 0.375" (9.5 mm) Lead Lengths 2 1 0 0 25 50 75 100 125 150 175 200 10 1 10 100 TL - Lead Temperature (°C) Number of Cycles at 60 HZ Figure 5. Power Derating Curve Figure 6. Maximum Non-Repetitive Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 88368 Revision: 09-Feb-11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1