PE60FDFPW204MF

PE60 Vishay Sfernice Power Panel Potentiometer FEATURES • High power rating (6 W at 50 °C) • Cermet element • Full sealing • Mechanical strength • Industrial and professional grade • Tests according to CECC 41 000 RoHS COMPLIANT DIMENSIONS in millimeters PE 60 L FR = 50 (1.969) 150 (5.872) Min Ø 25 8 18 (0.709) FG = 16 (0.630) FL = 25 (0.984) 150 (5.872) Min PE 60 F GR = 50.8 (2) 18 (0.709) GB = 12.7 (1/2) GJ = 22.22 (7/8) Slot 1 x 1.8 deep (0.039 x 0.071) Ø 6.35 (0.250) Ø6 (0.236) Slot 1 x 1.8 deep Thread M 10 x 75 (0.039 x 0.071) 12 (0.472) wrench = 14 (0.551) 9.52 (3/8) Thread 3/8 32-UNEF-2A wrench = 12.5 (0.492) OPTION D: DBAN SHAFT LOCKING wrench = 14 (0.551) wrench = 12 (0.472) Ø6 (0.236) OPTION L: PE 60 LPRP - WITH LOCATING PEG 3 (0.118) 0.8 (0.031) 12.5 (0.492) 9.2 (0.362) Ø 1.8 (0.071) 6.5 (0.256) 15 (0.591) Available only with PE 60 L 3 (0.118) Available on PE 60 L and PE 60 F 2.3 (0.091) Panel sealed version PE 60 M OPTION E: Including locating peg (available only for PE 60 M) 8 ± 0.2 (0.315 ± Ø 1.2 0.008) (0.047) 21 (0.825) 0.7 (0.028) 9 (0.356) Flat Located Ø6 (0.236) CIRCUIT DIAGRAM Yellow (1) Green (3) CW (2) Red Ø 10.5 (0.413) Sealing ring FD = 13 (0.514) FJ = 22 (0.868) FP = 47 (1.852) Available only with bushing M10 x 0.75 and shafts Ø 6 mm www.vishay.com 134 For technical questions, contact: sfer@vishay.com See also: Application notes Document Number: 51005 Revision: 05-Jun-08 PE60 Power Panel Potentiometer Vishay Sfernice SPECIAL FEATURES COMMAND SHAFT Length is measured from the mounting surface to the free end of the shaft. The screwdriver slot is aligned with the wiper within ± 10°. Special shafts are available, in accordance to drawings supplied by customers. We recommend that customers should not machine shafts, in order to avoid damage. SHAFT LOCKING: DBAN The shaft locking device consists of a tapered nut tightening a slotted notched washer against both bushing and shaft. DBAN tightening torque is 200 Ncm, shaft locking torque being 30 Ncm. DBAN is also available with all special types. This device is normally supplied in a separate bag. Can be pre-mounted on request. PANEL SEALING: PE60M The panel sealing device consists of a ring located in a slot on the potentiometer face. Sealing is obtained by tightening the ring against the panel when mounting the potentiometer. LOCATING PEG: LPRP Location is obtained by fitting a special washer on the potentiometer face. The peg can therefore be positioned at 90°, 180°, 270° and 360°. ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard series E3 Tolerance Power Rating Temperature Coefficient Limiting Element Voltage (Linear Law) Contact Resistance Variation (Linear Law) End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance (500 VDC) Standard On Request Linear Logarithmic Linear Law Logarithmic Laws cermet 270° ± 10° 1 Ω to 1 M Ω 100 Ω to 2.2 MΩ 1 - 2 - 2.5 - 5 ± 20 % ± 10 % - ± 5 % 6 W at + 50 °C 3 W at + 50 °C see Standard Resistance Element Data 350 V 3 % Rn or 0.5 Ω 0.5 Ω or 1 % 2500 V 106 MΩ MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Max Tightening Torque of Mounting Nut (Ncm) Unit Weight (max. g) 250 25 to 35 300° ± 5° 3 typical 70 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 125 °C 55/125/56 fully sealed container IP67 POWER RATING CHART 6 LIN. LAW “A” RESISTANCE LAWS 100 % TOTAL RESISTANCE 80 F 60 A L 40 POWER IN W LOG. LAWS “L & F” 3 20 0 0 0 20 40 60 70 80 100 125 140 0 20 40 60 80 100 AMBIENT TEMPERATURE IN °C % CLOCKWISE SHAFT ROTATION Document Number: 51005 Revision: 05-Jun-08 For technical questions, contact: sfer@vishay.com See also: Application notes www.vishay.com 135 PE60 Vishay Sfernice PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS CONDITIONS Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles 56 days 25 000 cycles 1000 hours at rated power 90’/30’ - ambient temp. 25 °C 5 cycles - 55 °C at + 125 °C 50 g at 11 ms 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g during 6 hours ΔRT (%) RT ± 0.5 % ± 0.5 % Insulation resistance: > 104 MΩ ±3% Contact res. variation: < 5 % Rn ±3% Contact res. variation: < 3 % Rn ± (0.5 % ± 0.1 Ω) ± 0.1 % ± 0.2 % ΔR1-2 (%) R1-2 ±1% ±1% Power Panel Potentiometer Climatic Sequence Long Term Damp Heat Rotational Life Load Life Rapid Temperature Change Shock Vibration ± 0.1 % ± 0.2 % STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES Ω 1 2 5 10 20 25 50 100 200 250 500 1K 2K 2.5K 5K 10K 20K 25K 50K 100K 200K 250K 500K 1M 6 4.90 2.45 1.23 0.61 0.49 0.25 0.12 350 LINEAR LAW MAX. POWER AT 25 °C W 6 MAX. WORKING VOLTAGE V 2.4 3.5 5.5 7.7 11.0 12.2 17.3 24.5 34.6 38.7 54.8 77.5 110 122 173 245 346 350 TYPICAL TCR MAX. CUR. THROUGH - 55 °C + 125 °C WIPER mA 2449 1732 1095 775 548 490 346 245 173.2 154.9 109.5 77.5 54.8 49.0 34.64 24.49 17.32 14.00 7.00 3.50 1.75 1.40 0.70 0.35 ± 250 ± 500 ppm/°C MARKING Printed: - VISHAY trademark - SAP Part number - manufacturing date PACKAGING - in box of 5 pieces www.vishay.com 136 For technical questions, contact: sfer@vishay.com See also: Application notes Document Number: 51005 Revision: 05-Jun-08 PE60 Power Panel Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P E 6 0 L 0 F G W 2 0 4 M A MODEL BUSHING M = Panel sealed L = STD F = 3/8" OPTION 0 = none For L Bushing D = DBAN L = LPRP B = DBAN and LPRP For F Bushing L = LPRP SHAFT For L Bushing FG 16 mm, slotted FL 25 mm, slotted FR 50 mm, plain For F Bushing GB 1/2", slotted GJ 7/8", slotted GR 2", slotted LEADS W: Wire OHMIC VALUE 204 = 200 kΩ TOLERANCE ± 20 % on request ± 10 % ±5% LAW A = Linear L = clockwise logarithmic F = clockwise inverse logarithmic SPECIAL NUMBER (if applicable) Given by VISHAY for custom design For M Bushing For M Bushing FD = 13 mm, slotted FJ = 22 mm, slotted E = Peg FP = 47 mm, plain PART NUMBER DESCRIPTION (for information only) PE60 MODEL L BUSHING 0 OPTION FG SHAFT W LEADS 200 kΩ OHMIC VALUE 20 % TOL A LAW BO5 PACKAGING SPECIAL SPECIAL e4 LEAD (Pb)-FREE Document Number: 51005 Revision: 05-Jun-08 For technical questions, contact: sfer@vishay.com See also: Application notes www.vishay.com 137 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1