RMPG06J

RMPG06A thru RMPG06K Vishay General Semiconductor Miniature Fast Switching Plastic Rectifier FEATURES • Glass passivated chip junction • Fast switching for high efficiency • Low leakage current, typical IR less than 0.1 μA • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified MPG06 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF IR TJ max. 1.0 A 50 V to 800 V 40 A 150 ns, 200 ns, 250 ns 1.3 V 5.0 μA 150 °C MECHANICAL DATA Case: MPG06, molded epoxy over passivated chip Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 25 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL RMPG06A RMPG06B RMPG06D RMPG06G RMPG06J RMPG06K VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 200 140 200 1.0 400 280 400 600 420 600 800 560 800 UNIT V V V A IFSM 40 A TJ, TSTG - 55 to + 150 °C Document Number: 88706 Revision: 01-Feb-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 RMPG06A thru RMPG06K Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMATER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction capacitance TEST CONDITIONS 1.0 A SYMBOL RMPG06A RMPG06B RMPG06D RMPG06G RMPG06J RMPG06K UNIT VF TA = 25 °C IR TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz trr CJ 150 6.6 50 200 250 ns pF 1.3 V 5.0 μA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RMPG06A RMPG06B RMPG06D RMPG06G RMPG06J RMPG06K UNIT RJA (1) RJL (1) 67 °C/W 30 Note (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted with 0.22" x 0.22" (5.5 mm x 5.5 mm) copper pads ORDERING INFORMATION (Example) PREFERRED P/N RMPG06J-E3/54 RMPG06J-E3/73 RMPG06JHE3/54 RMPG06JHE3/73 (1) (1) UNIT WEIGHT (g) 0.202 0.202 0.202 0.202 PREFERRED PACKAGE CODE 54 73 54 73 BASE QUANTITY 5500 3000 5500 3000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging 13" diameter paper tape and reel Ammo pack packaging Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.2 50 Average Forward Rectified Current (A) 1.0 Peak Forward Surge Current (A) 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length TJ = TJ Max. 8.3 ms Single Half Sine-Wave 40 No Load Condition 0.8 30 0.6 Capacitive Loads 5.0 Ipk = 10 IAV 20 20 Rated Load 0.4 0.2 10 0 0 25 50 75 100 125 150 175 0 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve www.vishay.com 2 Fig. 2 - Maximum Peak Forward Surge Current Document Number: 88706 Revision: 01-Feb-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com RMPG06A thru RMPG06K Vishay General Semiconductor 100 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 125 °C 1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle Junction Capacitance (pF) 1.8 10 0.1 0.01 0.4 1 0.6 0.8 1.0 1.2 1.4 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 100 TJ = 125 °C 1 Transient Thermal Impedance (°C/W) 100 Instantaneous Reverse Current (μA) 10 TJ = 75 °C 0.1 1 TJ = 25 °C 0.01 0 20 40 60 80 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) MPG06 0.100 (2.54) 0.090 (2.29) DIA. 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. Document Number: 88706 Revision: 01-Feb-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1