RS07J-M

RS07B-M, RS07D-M, RS07G-M, RS07J-M, RS07K-M Vishay Semiconductors Small Signal Fast Switching Diode, High Voltage Features • • • • • • • • • For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 °C/10 s at terminals Wave and reflow solderable AEC-Q101 qualified Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 61249-2-21 definition 17249 Mechanical Data Case: DO-219AB (SMF) Polarity: band denotes cathode end Weight: approx. 15 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape) 08/3K per 7" reel (8 mm tape) Parts Table Part RS07B-M RS07D-M RS07G-M RS07J-M RS07K-M Ordering code RS07B-M-18 or RS07B-M-08 RS07D-M-18 or RS07D-M-08 RS07G-M-18 or RS07G-M08 RS07J-M-18 or RS07J-M-08 RS07K-M-18 or RS07K-M-08 Marking TB TD TG TJ TK Remarks Tape and reel Tape and reel Tape and reel Tape and reel Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Part RS07B-M RS07D-M Maximum repetitive peak reverse voltage RS07G-M RS07J-M RS07K-M RS07B-M RS07D-M Maximum RMS voltage RS07G-M RS07J-M RS07K-M RS07B-M RS07D-M Maximum DC blocking voltage RS07G-M RS07J-M RS07K-M Maximum average forward rectified current Peak forward surge current 8.3 ms half sine-wave Document Number 85195 Rev. 1.1, 30-Aug-10 Ttp = 65 °C TA = 45 °C TL = 25 °C Symbol VRRM VRRM VRRM VRRM VRRM VRMS VRMS VRMS VRMS VRMS VDC VDC VDC VDC VDC IF(AV) IF(AV) IFSM Value 100 200 400 600 800 70 140 280 420 560 100 200 400 600 800 1.4 0.5 30 Unit V V V V V V V V V V V V V V V A A A For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 RS07B-M, RS07D-M, RS07G-M, RS07J-M, RS07K-M Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to tie point Thermal resistance junction to ambient air 1) Operating junction and storage temperature range Test condition Symbol RthJtp RthJA Tj, Tstg Value 30 180 - 55 to + 150 Unit K/W K/W °C Note: 1) Mounted on epoxy glass PCB with 3 mm x 3 mm, Cu pads (≥ 40 µm thick) Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Part RS07B-M Maximum instantaneous forward voltage 0.7 A 1) RS07D-M RS07G-M RS07J-M 1A 1) Symbol VF VF VF VF VF IR IR IR IR IR IR IR IR IR IR trr trr trr trr trr CD CD CD CD CD Min. Typ. Max. 1.15 1.15 1.15 1.15 1.3 10 10 10 10 2 50 50 50 50 150 150 150 150 250 300 Unit V V V V V µA µA µA µA µA µA µA µA µA µA ns ns ns ns ns pF pF pF pF pF RS07K-M RS07B-M RS07D-M TA = 25°C RS07G-M RS07J-M RS07K-M RS07B-M RS07D-M Maximum DC reverse current at rated DC blocking voltage TA = 125°C RS07G-M RS07J-M RS07K-M RS07B-M RS07D-M RS07G-M RS07J-M RS07K-M RS07B-M RS07D-M Reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A 9 9 9 9 4 Typical capacitance 4 V, 1 MHz RS07G-M RS07J-M RS07K-M Note: 1) Pulse test, 300 μs pulse width 1 % duty cycle www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85195 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.1, 30-Aug-10 RS07B-M, RS07D-M, RS07G-M, RS07J-M, RS07K-M Vishay Semiconductors Typical Characteristics Tamb = 25 °C, unless otherwise specified 10 Typ. at 25 °C RS07D-M Typ. at 150 °C 1 RS07D-M 35 30 Typ. at 25 °C RS07G-M Typ. at 150 °C RS07G-M Typ. at 25 °C RS07J-M Typ. at 150 °C RS07J-M 25 RS07D-M CD (pF) IF (A) 20 15 10 RS07G-M 0.1 0.01 RS07J-M 5 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 0.1 18248-1 1 10 100 18246-1 VF (V) VR (V) Figure 1. Typical Forward Characteristics Figure 4. Typ. Diode Capacitance vs. Reverse Voltage 10 Typical at 150 °C Max. at 150 °C max. at 150 °C 1 Typical at 25 °C 12 10 f = 1 MHz 8 CD (pF) IF (A) RS07K-M 6 4 0.1 Max. at 25 °C 0.01 RS07K-M 2 0 0.001 0 21403 0.4 0.8 1.2 1.6 2 2.4 21405-1 0.1 1 10 100 VF (V) VR (V) Figure 2. Typical Forward Characteristics Figure 5. Typ. Diode Capacitance vs. Reverse Voltage 1.6 Tie point temperature 1.4 1.2 1000 RS07B-M, RS07D-M, RS07G-M, RS07J-M 100 TJ = 150 °C IFAV (A) IR (µA) 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 Ambient temperature 10 1 0.1 0.01 0.001 TJ = 75 °C TJ = 25 °C TJ = 125 °C TJ = 100 °C TJ = 50 °C TJ = 0 °C TJ = - 50 °C 0 100 200 300 400 500 600 18247 Tamb (°C) 18249-1 VR (V) Figure 3. Forward Current Derating Curve Figure 6. Typical Reverse Characteristics Document Number 85195 Rev. 1.1, 30-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 RS07B-M, RS07D-M, RS07G-M, RS07J-M, RS07K-M Vishay Semiconductors 1000 RS07K-M 100 TJ at 150 °C TJ at 125 °C TJ at 100 °C TJ at 75 °C 1 TJ at 25 °C IR (µA) 10 0.1 0.01 100 21406-1 300 500 700 900 VR (V) Figure 7. Typical Reverse Characteristics Package Dimensions in millimeters (inches): DO-219AB (SMF) 0.85 (0.033) 0.35 (0.014) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 5 1.9 (0.075) 1.7 (0.067) 1.2 (0.047) 0.8 (0.031) 0 (0.000) Detail Z enlarged 1.08 (0.043) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.88 (0.035) Foot print recommendation: 1.3 (0.051) 1.3 (0.051) Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 17247 1.4 (0.055) 2.9 (0.114) www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number 85195 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.1, 30-Aug-10 5 RS07B-M, RS07D-M, RS07G-M, RS07J-M, RS07K-M Vishay Semiconductors Blistertape Dimensions for SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Document Number 85195 Rev. 1.1, 30-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000