S152M39Z5US6.K7.

EMI/RFI Y2-DN Vishay BCcomponents Ceramic Disc Capacitors Safety, Class X1/Y2 400/250 V (AC) Series DN FEATURES D D • Complying with “EN 132 400” and “IEC 60384-14, 2nd edition, including amendment 1.1995” • High reliability • Kinked (preferred) or straight leads e3 RoHS COMPLIANT tangent line • Lead (Pb)-free available SH APPLICATIONS • Across-the-line • Line by-pass • Antenna coupling F F DESIGN The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm or 0.8 mm. The capacitors may be supplied with kinked or straight leads having a lead spacing of 7.5 mm (0.300") or 10 mm (0.400") and a lead length from 4 to 30 mm. The standard tolerance on capacitance is ± 10 % for U2M, Y5P material, ± 20 % for Z5U, Y5U material and - 20/+ 80 % for Y5V. Encapsulation is made of flammable resistant epoxy resin in accordance with “UL94V-0”. Capacitors with 7.5 mm (0.30")10 mm (0.40") lead spacing INSULATION RESISTANCE AT 500 V (DC): ≥ 10 000 MΩ TOLERANCE ON CAPACITANCE: ± 10 %; ± 20 %; - 20/+ 80 % DISSIPATION FACTOR: at 1 kHz; 1 V (RMS); 2.5 % max CAPACITANCE RANGE: at 1 kHz, 1 V (RMS); 10 to 10 000 pF TEMPERATURE COEFFICIENTS: U2M; Y5P; Z5U; Y5U; Y5V RATED VOLTAGE UR: (X1): 400 V (AC), 50 Hz (IEC 60384-14.2) (Y2): 250 V (AC), 50 Hz (IEC 60384-14.2) APPROVALS: ENEC, UL, CSA DIELECTRIC STRENGTH BETWEEN LEADS: Component test: 2500 V (AC), 50 Hz, 2 seconds As repeated test admissible only once with: 2250 V (AC), 50 Hz, 2 seconds Random sampling test (destructive test): 2500 V (AC), 50 Hz, 60 seconds CLIMATIC CATEGORY: 25/125/56 or 25/85/21 OPERATING TEMPERATURE RANGE: - 30 to + 125 °C MARKING Marking indicates capacitance value and tolerance in accordance with “EIA 198”, voltage and approval marks. DIELECTRIC STRENGTH OF BODY INSULATION: 2500 V (AC), 50 Hz, 60 seconds (destructive test) The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 ± 3 °C, at normal atmospheric conditions. Document Number: 28518 Revision: 12-Dec-06 For technical questions, contact: CDC@vishay.com www.vishay.com 78 EMI/RFI Y2-DN Vishay BCcomponents Ceramic Disc Capacitors Safety, Class X1/Y2 400/250 V (AC) Series DN CLEAR TEXT CODE C (pF) TOL. (%) Dmax (mm) LEAD SPACING F (mm) SH(2) (mm) 13th DIGIT: T = REEL; U = AMMO; 3 = BULK(3) 16th DIGIT: R = RoHS COMPLIANT S100K25U2MS6.K7. S150K25U2MS6.K7. S220K25U2MS6.K7. S330K25U2MS6.K7. S470K29U2MS6.K7. S680K33U2MS6.K7. S101K33Y5PS6.K7. S151K33Y5PS6.K7. S221K33Y5PS6.K7. S331K33Y5PS6.K7. S471K33Y5PS6.K7. S681K39Y5PS6.K7. S102K43Y5PS6.K7. S102M33Z5US6.K7. S152M39Z5US6.K7. S222M43Z5US6.K7. S332M53Z5US6.K7. S392M53Z5US6.K7. S472M59Z5US63K7. S682M69Z5US83K0. S103M84Z5US83K0. S102M29Y5US6.K7. S152M33Y5US6.K7. S222M39Y5US6.K7. S332M47Y5US6.K7. S392M53Y5US6.K7. S472M53Y5US6.K7. S222Z33Y5VS6.K7. S472Z47Y5VS6.K7. S103Z63Y5VS83K7. ORDERING INFORMATION 250 V (AC) U2M 10 15 22 33 47 68 Y5P 100 150 220 330 470 680 1000 Z5U 1000 1500 2200 3300 ± 20 3900 4700 6800 10 000 Y5U 1000 1500 2200 ± 20 3300 3900 4700 Y5V 2200 - 20/+ 80 4700 10 000 Notes 1. Maximum thickness 6.0 mm 2. SH = seated height 3. Straight leads are available on request 8.5 10.0 11.0 13.5 15.0 17.5 21.5 7.5 8.5 10.0 12.0 13.5 8.5 12.0 16.0 6.5 ± 10 7.5 8.5 7.5 4.0 8.5 ± 10 10.0 11.0 7.5 4.0 7.5 4.0 10 7.5 4.0 7.5 4.0 PACKAGING Dmax (mm) 8.5 (0.33") 10.0 (0.39") 11.0 (0.43") 12.0 (0.47") 13.5 (0.53") 15.0 (0.59") 17.5 (0.69") 19.0 (0.75") 21.5 (0.84") SIZE CODE 33 39 43 47 53 59 69 75 84 BULK 1000 PACKAGING QUANTITIES REEL AMMO 1000 1000 500 - 250 Note 1. The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack www.vishay.com 79 For technical questions, contact: CDC@vishay.com Document Number: 28518 Revision: 12-Dec-06 EMI/RFI Y2-DN Ceramic Disc Capacitors Sarfety, Class X1/Y2 400/250 V (AC) Series DN D P2 P Δs ΔP Δs ΔP Δh Δh Vishay BCcomponents H1 W2 H0 L W1 W0 W A e direction of unreeling d P1 F P0 t1 detail A t D0 Kinked capacitors on tape, lead spacing 7.5 mm (0.30") DIMENSIONS OF TAPE SYMBOL D d P P0 ΔP P1 P2 F Δh W W0 W1 W2 H0 H1 e L D0 t t1 PARAMETER NOMINAL body diameter lead diameter pitch between capacitors feed-hole pitch plane deviation feed-hole centre to lead centre feed-hole centre to component centre lead spacing component alignment tape width hold-down tape width hole position hold-down tape margin height to seating plane maximum component height lead end protrusion maximum length of snipped lead feed-hole diameter total tape thickness maximum thickness of tape and wires 14.0 max. 0.6 15 15 1.0 max. 3.75 7.5 7.5 0 18.0 5.0 min. 9.0 3.0 max. 16.0 40 1.0 max. 11.0 4.0 0.9 max. 1.5 max. DIMENSIONS (mm) TOLERANCE ± 0.05 ± 1.0 ± 0.3; note 1 ± 0.7; note 2 ± 1.3; note 2 + 0.6/- 0.4 ± 1.0 + 1.0 - 0.5 + 0.75 - 0.5 ± 0.5 ± 0.2 − − Notes 1. Cumulative pitch error: ± ≤ 1 mm/20 pitches 2. Obliquity maximum 3° Document Number: 28518 Revision: 12-Dec-06 For technical questions, contact: CDC@vishay.com www.vishay.com 80 EMI/RFI Y2-DN Vishay BCcomponents Ceramic Disc Capacitors Safety, Class X1/Y2 400/250 V (AC) Series DN REEL AND TAPE DATA in millimeters 355.6 ± 2.0 28 ± 1.5 Reel with capacitors on tape 330 350 55 Ammopack with capacitors on tape www.vishay.com 81 For technical questions, contact: CDC@vishay.com Document Number: 28518 Revision: 12-Dec-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1