S1PM

New Product S1PB thru S1PM Vishay General Semiconductor High Current Density Surface Mount Glass Passivated Rectifiers FEATURES • Very low profile - typical height of 1.0 mm • Ideal for automated placement ® eSMP Series • Glass passivated chip junction • Low forward voltage drop • Low thermal resistance • Meets MSL level 1, per LF maximum peak of 260 °C • AEC-Q101 qualified J-STD-020, DO-220AA (SMP) • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) VRRM IR VF TJ max. 1.0 A 100 V to 1000 V 1 μA 0.95 V 150 °C Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end TYPICAL APPLICATIONS General purpose, polarity protection, and rail-to-rail protection in both consumer and automotive applications. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Average forward current Peak forward surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM TJ, TSTG SYMBOL S1PB SB 100 70 100 S1PD SD 200 140 200 S1PG SG 400 280 400 1.0 30 - 55 to + 150 S1PJ SJ 600 420 600 S1PK SK 800 560 800 S1PM SM 1000 700 1000 V V V A A °C UNIT Document Number: 88917 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product S1PB thru S1PM Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum reverse current TEST CONDITIONS IF = 1.0 A IF = 1.0 A Rated VR TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL VF (1) 1.0 50 1.8 6.0 S1PB S1PD S1PG 1.1 V 0.95 1.0 100 μA μA μs pF S1PJ S1PK S1PM UNIT IR (2) trr CJ Typical reverse recovery time Typical junction capacitance time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted) PARAMETER SYMBOL RJA (1) Typical thermal resistance RJL RJC Note (1) (1) (1) S1PB S1PD S1PG 105 15 20 S1PJ S1PK S1PM UNIT °C/W Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 mm x 5.0 mm copper pad areas. RJL is measured at the terminal of cathode band. RJC is measured at the top center of the body ORDERING INFORMATION (Example) PREFERRED P/N S1PJ-M3/84A S1PJ-M3/85A S1PJHM3/84A (1) S1PJHM3/85A (1) (1) UNIT WEIGHT (g) 0.024 0.024 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A 84A 85A BASE QUANTITY 3000 10 000 3000 10 000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel Note Automotive grade RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1.2 1.2 D = 0.5 1.0 1.0 D = 0.3 D = 0.2 0.8 D = 0.1 D = 1.0 D = 0.8 Average Forward Rectified Current (A) 0.8 0.6 Average Power Loss (W) 0.6 T 0.4 0.4 TL Measured at the Cathode Band Terminal 0.2 0.2 D = tp/T tp 0 80 90 100 110 120 130 140 150 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Lead Temperature (°C) Average Forward Current Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2 Fig. 2 - Forward Power Loss Characteristics For technical questions within your region, please contact one of the following: Document Number: 88917 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product S1PB thru S1PM Vishay General Semiconductor 30 100 Peak Forward Surge Current (A) 20 Junction Capacitance (pF) 1 10 100 25 15 10 10 5 0 1 0.1 1 10 100 Number of Cycles at 50 Hz Reverse Voltage (V) Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 6 - Typical Junction Capacitance 100 1000 10 TJ = 150 °C Transient Thermal Impedance (°C/W) 1.6 1.8 2.0 Instantaneous Forward Current (A) 100 1 TJ = 25 °C 0.1 10 TJ = 125 °C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 7 - Typical Transient Thermal Impedance 100 Instantaneous Reverse Current (μA) TJ = 150 °C 10 TJ = 125 °C 1 0.1 TJ = 25 °C 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Typical Reverse Leakage Characteristics Document Number: 88917 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product S1PB thru S1PM Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) Cathode Band 0.012 (0.30) REF. 0.086 (2.18) 0.074 (1.88) 0.053 (1.35) 0.041 (1.05) 0.036 (0.91) 0.024 (0.61) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.025 0.030 (0.635) (0.762) 0.050 (1.27) www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 88917 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1