S391D
Vishay Semiconductors
RF PIN Diode - Single in MiniMELF SOD-80
Features
• Wide frequency range 10 MHz to 1 GHz • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC
Applications
• Current controlled HF resistance in adjustable attenuators
94 9371
Mechanical Data
Case: MiniMELF SOD-80 Weight: approx. 31 mg Cathode band color: black Packaging codes/options: GS08/2.5K per 7" reel (8 mm tape), 12.5K/box
Parts Table
Part S391D Type differentiation V R = 30 V Ordering code S391D-GS08 Remarks Tape and reel
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter Reverse voltage Forward continuous current Test condition Symbol VR IF Value 30 50 Unit V mA
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter Junction to ambient air Junction temperature Storage temperature range Test condition on PC board 50 mm x 50 mm x 1.6 mm Symbol RthJA Tj Tstg Value 500 125 - 55 to + 150 Unit K/W °C °C
Document Number 85569 Rev. 1.6, 16-Jul-10
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 1
S391D
Vishay Semiconductors Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter Forward voltage Reverse current Diode capacitance Differential forward resistance Reverse impedance Minority carrier lifetime Test condition IF = 20 mA V R = 30 V f = 100 MHz, VR = 0 f = 100 MHz, IF = 1.5 mA f = 100 MHz, VR = 0 IF = 10 mA, IR = 10 mA Symbol VF IR CD rf zr τ 40 5 4 Min Typ. Max 1000 50 0.5 60 Unit mV nA pF Ω kΩ μs
Typical Characteristics
Tamb = 25 °C, unless otherwise specified
100
IF - Forward Current (mA)
10
Tamb = 25 °C 1
Scattering Limit 0.1
0.01 0
95 9735
0.4
0.8
1.2
1.6
2.0
VF - Forward Voltage (V)
Figure 1. Forward Current vs. Forward Voltage
Package Dimensions in millimeters (inches): MiniMELF SOD-80
Cathode indification
* 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side
Foot print recommendation: 2.5 (0.098) max. 1.25 (0.49) min.
1.6 (0.063) 1.4 (0.055)
5 (0.197) ref.
Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006
96 12070
www.vishay.com 2
For technical questions within your region, please contact one of the following: Document Number 85569 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.6, 16-Jul-10
2 (0.079) min.
MiniMELF SOD80
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches)
Cathode indification
* 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side
Foot print recommendation: 2.5 (0.098) max. 1.25 (0.49) min.
1.6 (0.063) 1.4 (0.055)
5 (0.197) ref.
Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006
96 12070
Document Number: 84013 Rev. 1.3, 12-Jan-07
For technical questions, contact: EMI-filter@vishay.com
2 (0.079) min.
www.vishay.com 21
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1