SB230S

New Product SB220S thru SB260S Vishay General Semiconductor Schottky Barrier Rectifier FEATURES • Guardring for overvoltage protection • Very small conduction losses • Extremely fast switching • Low forward voltage drop • High forward surge capability • High frequency operation • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. MECHANICAL DATA Case: DO-204AL (DO-41) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end DO-204AL (DO-41) PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 2.0 A 20 V to 60 V 50 A 0.55 V, 0.70 V 125 °C, 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current at 0.375" (9.5 mm) lead length (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range SYMBOL SB220S SB230S SB240S SB250S SB260S VRRM IF(AV) IFSM dV/dt TJ TSTG - 65 to + 125 - 65 to + 150 20 30 40 2.0 50 10 000 - 65 to + 150 50 60 UNIT V A A V/µs °C °C ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current at rated VR (2) Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms TEST CONDITIONS 2.0 A TJ = 25 °C TJ = 125 °C SYMBOL SB220S SB230S SB240S SB250S SB260S VF IR 0.55 0.50 25 15 mA 0.70 UNIT V Document Number: 88951 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product SB220S thru SB260S Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance junction to lead P.C.B. mounted 0.375" (9.5 mm) lead length SYMBOL RθJA RθJL SB220S SB230S SB240S 75 25 SB250S SB260S UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N SB240S-E3/54 SB240S-E3/73 UNIT WEIGHT (g) 0.346 0.346 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 5500 3000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.0 100 Instantaneous Forward Current (A) Average Forward Current (A) TJ = 125 °C 10 TJ = 150 °C 1.5 Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 1.0 SB220S - SB240S 0.5 SB250S & SB260S Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C 1 0.1 SB220S - SB240S SB250S & SB260S 0.01 0 0 25 50 75 100 125 150 175 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Lead Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics 50 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Instantaneous Reverse Current (mA) Peak Forward Surge Current (A) SB220S - SB240S SB250S & SB260S 10 TJ = 125 °C 40 30 1 20 0.1 10 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 0 1 10 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 4. Typical Reverse Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88951 Revision: 19-May-08 New Product SB220S thru SB260S Vishay General Semiconductor 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) 100 SB220S - SB240S SB250S & SB260S 10 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Document Number: 88951 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1