SB340A-E373

New Product SB320A thru SB360A Vishay General Semiconductor Schottky Barrier Rectifier FEATURES • Guardring for overvoltage protection • Very small conduction losses • Extremely fast switching • Low forward voltage drop • High frequency operation • 20 kV ESD capability DO-201AD • Solder dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, free-wheeling, dc-to-dc converters, and polarity protection applications. MECHANICAL DATA Case: DO-201AD Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade Polarity: Color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 3.0 A 20 V to 60 V 80 A 0.50 V, 0.70 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at 0.375" (9.5 mm) lead length (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Electrostatic discharge capacitor voltage Human body model air discharge: C = 100 pF, R = 1.5 kΩ Voltage rate of change (rated VR) Operating junction and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM VC dv/dt TJ, TSTG SB320A 20 14 20 SB330A 30 21 30 SB340A 40 28 40 3.0 80 20 10000 - 65 to + 150 SB350A 50 35 50 SB360A 60 42 60 UNIT V V V A A KV V/µs °C Document Number: 88925 Revision: 20-Aug-07 www.vishay.com 1 New Product SB320A thru SB360A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) TEST CONDITIONS at 3.0 A SYMBOL VF IR SB320A SB330A SB340A 0.50 0.5 20 10 SB350A SB360A UNIT V mA 0.70 Maximum instantaneous reverse current TA = 25 °C TA = 100 °C at rated DC blocking voltage (1) Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance from junction to lead vertical P.C.B. mounting, 0.500" (12.7 mm) lead length with 2.5 x 2.5" (63.5 x 63.5 mm) copper pad SYMBOL RθJA RθJL SB320A SB330A SB340A SB350A 40 12 SB360A UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N SB340A-E3/54 SB340A-E3/73 UNIT WEIGHT (g) 1.077 1.077 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 1400 1000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 4.0 100 Peak Forward Surge Current (A) 125 150 Average Forward Current (A) 3.0 80 60 2.0 40 1.0 SB320A - SB340A SB350A - SB360A 0 0 25 50 75 100 175 20 0 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 Document Number: 88925 Revision: 20-Aug-07 New Product SB320A thru SB360A Vishay General Semiconductor 100 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) TJ = 150 °C 10 Pulse Width = 300 µs 1 % Duty Cycle 1 SB320A - SB340A SB350A - SB360A TJ = 25 °C TJ = 125 °C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Junction Capacitance (pF) 100 0.1 SB320A - SB340A SB350A - SB360A 10 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 100 10 1 0.1 0.01 TJ = 125 °C TJ = 25 °C TJ = 150 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 10 0.001 SB320A - SB340A SB350A - SB360A 10 20 30 40 50 60 70 80 90 100 0.0001 1 0 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88925 Revision: 20-Aug-07 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1