SB360S

New Product SB320S thru SB360S Vishay General Semiconductor Schottky Barrier Rectifier FEATURES • Very small conduction losses • Extremely fast switching • Low forward voltage drop • High frequency operation • 20 kV ESD capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC DO-204AC (DO-15) TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 3.0 A 20 V to 60 V 100 A 0.50 V, 0.70 V 125 °C, 150 °C For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. MECHANICAL DATA Case: DO-204AC (DO-15) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at 0.375" (9.5 mm) lead length (fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Electrostatic discharge capacitor voltage human body model air discharge: C = 100 pF, R = 1.5 kΩ Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM VC dV/dt TJ TSTG - 65 to + 125 - 65 to + 150 SB320S 20 14 20 SB330S 30 21 30 SB340S 40 28 40 3.0 100 20 10 000 - 65 to + 150 SB350S 50 35 50 SB360S 60 42 60 UNIT V V V A A kV V/μs °C °C Document Number: 88819 Revision: 19-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 New Product SB320S thru SB360S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum reverse current at rated VR TEST CONDITIONS 3.0 A TA = 25 °C TA = 100 °C SYMBOL VF (1) IR (2) SB320S SB330S 0.50 0.50 mA 20 10 SB340S SB350S SB360S UNIT V 0.70 Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RθJA (1) RθJL (1) SB320S SB330S SB340S 40 °C/W 12 SB350S SB360S UNIT (1) Note Thermal resistance from junction to lead vertical P.C.B. mounting, 0.500" (12.7 mm) lead length with 2.5" x 2.5" (63.5 mm x 63.5 mm) copper pad ORDERING INFORMATION (Example) PREFERRED P/N SB360S-E3/54 SB360S-E3/73 UNIT WEIGHT (g) 0.40 0.40 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 4000 2000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 4.0 100 Peak Forward Surge Current (A) Average Forward Current (A) Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 3.0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 80 60 2.0 40 1.0 SB320S thru SB340S SB350S and SB360S 0 0 25 50 75 100 125 150 175 20 10 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 88819 Revision: 19-Oct-09 New Product SB320S thru SB360S Vishay General Semiconductor 100 1000 TJ = 125 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Pulse Width = 300 μs 1 % Duty Cycle 1 TJ = 25 °C 0.1 SB320S thru SB340S SB350S and SB360S 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Junction Capacitance (pF) 100 SB320S thru SB340S SB350S and SB360S 10 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 100 1 TJ = 125 °C 0.1 TJ = 25 °C 0.01 TJ = 75 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 10 SB320S thru SB340S SB350S and SB360S 0.001 0 20 40 60 80 100 1 0 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88819 Revision: 19-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1