SBL4030PT

SBL4030PT & SBL4040PT Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability 3 2 1 • High frequency operation • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. 40 A TO-247AD (TO-3P) PIN 1 PIN 3 PIN 2 CASE PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 30 V, 40 V 400 A 0.50 V 125 °C MECHANICAL DATA Case: TO-247AD (TO-3P) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 100 °C Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse surge current per diode (1) Voltage rate of change at (rated VR) Operating junction storage temperature range Note: (1) 2.0 µs pulse width, f = 1.0 kHz SYMBOL VRRM VRWM VDC IF(AV) IFSM IRRM dV/dt TJ, TSTG SBL4030PT 30 21 30 40 400 2.0 1000 - 40 to + 125 SBL4040PT 40 28 40 UNIT V V V A A A V/µs °C Document Number: 88733 Revision: 25-Mar-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 SBL4030PT & SBL4040PT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) Maximum instantaneous reverse current at rated DC blocking voltage per diode (1) Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle TEST CONDITIONS IF = 20 A, IF = 20 A, TC = 25 °C TC = 100 °C TC = 25 °C TC = 100 °C SYMBOL VF SBL4030PT 0.58 0.50 10 100 SBL4040PT UNIT V IR mA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Thermal resistance from junction to case per diode SYMBOL RθJC SBL4030PT 1.2 SBL4040PT UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-247AD PREFERRED P/N SBL4030PT-E3/45 UNIT WEIGHT (g) 6.13 PACKAGE CODE 45 BASE QUANTITY 30/tube DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 400 Average Forward Current (A) 40 Forward Surge Current (A) 0 50 100 150 300 30 20 200 10 0 100 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88733 Revision: 25-Mar-08 SBL4030PT & SBL4040PT Vishay General Semiconductor 100 10 000 TJ = 100 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 1 TJ = 25 °C Junction Capacitance (pF) 1000 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 100 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 100 10 TJ = 100 °C 1 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 10 0.1 TJ = 25 °C 0.01 1 0.001 0 20 40 60 80 100 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-247AD (TO-3P) 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.203 (5.16) 0.193 (4.90) 30° 0.170 (4.3) 0.840 (21.3) 0.820 (20.8) 0.142 (3.6) 0.138 (3.5) 10° TYP. Both Sides 0.078 (1.98) REF. 10 1 2 3 0.086 (2.18) 0.076 (1.93) 0.127 (3.22) 0.118 (3.0) 0.108 (2.7) 1° REF. Both Sides 0.160 (4.1) 0.140 (3.5) 0.795 (20.2) 0.775 (19.6) 0.117 (2.97) 0.225 (5.7) 0.205 (5.2) PIN 1 PIN 3 0.048 (1.22) 0.044 (1.12) 0.030 (0.76) 0.020 (0.51) PIN 2 CASE Document Number: 88733 Revision: 25-Mar-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1