SBLB10L25

SBL10L25, SBLF10L25 & SBLB10L25 New Product Vishay Semiconductors formerly General Semiconductor Reverse Voltage 25V Forward Current 10A Low VF Schottky Barrier Rectifier ITO-220AC (SBLF10L25) 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) TO-220AC (SBL10L25) 0.415 (10.54) MAX. 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) PIN 1 0.160 (4.06) 0.140 (3.56) 2 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) CASE PIN 1 2 0.185 (4.70) 0.175 (4.44) DIA. 0.055 (1.39) 0.045 (1.14) 0.600 (15.5) 0.580 (14.5) 0.676 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 0.603 (15.32) 0.573 (14.55) 0.560 (14.22) 0.530 (13.46) 0.191 (4.85) 0.171 (4.35) 0.060 (1.52) PIN 1 PIN 2 0.110 (2.80) 0.100 (2.54) PIN 1 PIN 2 0.205 (5.20) 0.195 (4.95) 0.037 (0.94) 0.027 (0.69) 0.022 (0.55) 0.014 (0.36) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 0.037 (0.94) 0.027 (0.68) 0.022 (0.56) 0.014 (0.36) TO-263AB (SBLB10L25) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN K 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout TO-263AB 0.42 (10.66) 0.360 (9.14) 0.320 (8.13) 0.33 (8.38) 0.63 (17.02) 0.055 (1.40) 0.047 (1.19) 1 K 2 0.624 (15.85) 0.591 (15.00) 0-0.01 (0-0.254) 0.110 (2.79) 0.090 (2.29) Dimensions in inches and (millimeters) 0.08 (2.032) 0.24 (6.096) 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) 0.095 (2.41) PIN 1 PIN 2 K - HEATSINK 0.021 (0.53) 0.014 (0.36) 0.140 (3.56) 0.110 (2.79) 0.12 (3.05) 0.205 (5.20) 0.195 (4.95) Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Dual rectifier construction, positive center tap • Metal silicon junction, majority carrier conduction • Low power loss, high efficiency • Guardring for overvoltage protection • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Mechanical Data Case: JEDEC TO-220AC, ITO-220AC & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds, at terminals Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g www.vishay.com 1 Document Number 88723 01-Jul-02 SBL10L25, SBLF10L25 & SBLB10L25 Vishay Semiconductors formerly General Semiconductor Maximum Ratings Parameter (TC = 25°C unless otherwise noted) Symbol VRRM VRWM VDC IF(AV) SBL10L25 25 18 25 10 Unit V V V A Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 135°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse current at tp = 2µs, 1kHz Voltage rate of change (rated VR) Operating junction and storage temperature range RMS Isolation voltage (SBLF type only) from terminals to heatsink with t = 1 second, RH ≤ 30% IFSM IRRM dv / dt TJ, TSTG VISOL 240 1.0 10,000 –65 to +150 4500 3500(2) 1500(3) (1) A A V / µs °C V Electrical Characteristics (T Parameter Maximum instantaneous forward voltage (4) at at at at IF IF IF IF = = = = C = 25°C unless otherwise noted) Symbol 10A, TJ 10A, TJ 20A, TJ 20A, TJ = = = = 25°C 125°C 25°C 125°C Value 0.46 0.35 0.55 0.48 0.80 260 Unit VF V Maximum instantaneous reverse current at DC blocking voltage(4) TJ = 25°C TJ = 125°C IR mA Thermal Characteristics (T Parameter C = 25°C unless otherwise noted) Symbol RθJC SBL 1.5 SBLF 4.0 SBLB 1.5 Unit °C/W Typical thermal resistance from junction to case per leg Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”) (4) Pulse test: 380µs pulse width, 2% duty cycle Ordering Information Part Number SBL10L25 SBLF10L25 SBLB10L25 Case TO-220AC ITO-220AC TO-263AB Package Code 45 45 45 31 81 Package Option Anti-static tube pack, 50/tube, 2K/carton Anti-static tube pack, 50/tube, 2K/carton Anti-static tube pack, 50/tube, 2K/carton 13” tape/reel, 800/reel, 4.8K/carton Anti-static 13” tape/reel, 800/reel, 4.8K/carton www.vishay.com 2 Document Number 88723 01-Jul-02 SBL10L25, SBLF10L25 & SBLB10L25 Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig. 1 – Forward Current Derating Curve IF — Instantaneous Forward Current (A) 12.5 100 Fig. 2 – Typical Instantaneous Forward Characteristics Average Forward Current (A) 10 10 TJ = 175°C TJ = 150°C TJ = 25°C 100°C 125°C 7.5 1.0 5 2.5 0.1 0 50 100 150 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Case Temperature (°C) Instantaneous Forward Voltage (V) Fig. 3 – Typical Reverse Characteristics 1000 10,000 Fig. 4 – Typical Junction Capacitance IR — Instantaneous Reverse Current 100 TJ = 125°C 10 TJ = 100°C pF — Junction Capacitance 80 100 TJ = 150°C 1,000 1.0 100 0.1 TJ = 25°C 0.01 0 10 20 40 60 1 10 100 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Fig. 5 – Typical Transient Thermal Impedance 100 Transient Thermal Impedance (°C/W) 10 1 0.1 0.01 0.1 1 10 t — Pulse Duration (sec.) Document Number 88723 01-Jul-02 www.vishay.com 3