SBLB10L30

SBL10L30, SBLF10L30 & SBLB10L30 New Product Vishay Semiconductors formerly General Semiconductor Reverse Voltage 30V Forward Current 10A Schottky Barrier Rectifier ITO-220AC (SBLF10L30) 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) PIN 1 0.160 (4.06) 0.140 (3.56) 2 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) CASE TO-220AC (SBL10L30) 0.415 (10.54) MAX. DIA. 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) 0.055 (1.39) 0.045 (1.14) 0.600 (15.5) 0.580 (14.5) 0.676 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) PIN 1 2 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 0.603 (15.32) 0.573 (14.55) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) PIN 1 PIN 2 0.110 (2.80) 0.100 (2.54) PIN 1 PIN 2 0.205 (5.20) 0.195 (4.95) 0.037 (0.94) 0.027 (0.69) 0.022 (0.55) 0.014 (0.36) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 0.037 (0.94) 0.027 (0.68) 0.022 (0.56) 0.014 (0.36) TO-263AB (SBLB10L30) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN K 0.055 (1.40) 0.047 (1.19) 1 K 2 0.624 (15.85) 0.591 (15.00) 0-0.01 (0-0.254) 0.110 (2.79) 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout TO-263AB 0.42 (10.66) 0.33 (8.38) 0.63 (17.02) 0.360 (9.14) 0.320 (8.13) Dimensions in inches and (millimeters) 0.08 (2.032) 0.24 (6.096) 0.090 (2.29) 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) PIN 1 PIN 2 K - HEATSINK 0.021 (0.53) 0.014 (0.36) 0.140 (3.56) 0.110 (2.79) 0.12 (3.05) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Dual rectifier construction, positive center tap • Metal silicon junction, majority carrier conduction • Low power loss, high efficiency • Guardring for overvoltage protection • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Mechanical Data Case: JEDEC TO-220AC, ITO-220AC & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g www.vishay.com 1 Document Number 88724 14-Nov-02 SBL10L30, SBLF10L30 & SBLB10L30 Vishay Semiconductors formerly General Semiconductor Maximum Ratings Parameter (TC = 25°C unless otherwise noted) Symbol VRRM VRWM VDC IF(AV) Value 30 21 30 10 Unit V V V A Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 140 °C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse current at tp = 2µs, 1kHz Voltage rate of change (rated VR) Operating junction and storage temperature range RMS Isolation voltage (SBLF type only) from terminals to heatsink with t = 1 second, RH ≤ 30% IFSM IRRM dv / dt TJ, TSTG VISOL 200 1.0 10,000 –65 to +150 4500 3500(2) 1500(3) (1) A A V / µs °C V Electrical Characteristics (T Parameter Maximum instantaneous forward voltage (4) C = 25°C unless otherwise noted) Symbol at IF = 10A, TJ = 25°C at IF = 10A, TJ = 125°C TJ = 25°C TJ = 125°C VF IR Value 0.52 0.43 1.0 100 Unit V mA Maximum instantaneous reverse current at DC blocking voltage(4) Thermal Characteristics (T Parameter C = 25°C unless otherwise noted) Symbol RθJC SBL 4.3 SBLF 4.8 SBLB 4.3 Unit °C/W Typical thermal resistance from junction to case per leg Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”) (4) Pulse test: 300µs pulse width, 2% duty cycle Ordering Information Product SBL10L30 SBLF10L30 SBLB10L30 Case TO-220AC ITO-220AC TO-263AB Package Code 45 45 31 45 81 Package Option Anti-Static tube, 50/tube, 2K/carton Anti-Static tube, 50/tube, 2K/carton 13” reel, 800/reel, 4.8K/carton Anti-Static tube, 50/tube, 2K/carton Anti-Static 13” reel, 800/reel, 4.8K/carton www.vishay.com 2 Document Number 88724 14-Nov-02 SBL10L30, SBLF10L30 & SBLB10L30 Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig. 1 - Forward Current Derating Curve Resistive or Inductive Load 10 Fig. 2 - Typical Instantaneous Forward Characteristics IF — Instantaneous Forward Current (A) 100 12.5 Average Forward Rectified Current (A) 10 TJ = 150°C 7.5 1.0 TJ = 125°C TJ = 100°C 5 2.5 0.1 TJ = 25°C 0 50 100 150 0.01 0 0.2 0.4 0.6 0.8 1.0 Case Temperature (°C) Instantaneous Forward Voltage (V) Fig. 3 - Typical Reverse Characteristics 1000 10,000 TJ = 150°C Fig. 4 - Typical Junction Capacitance IR — Instantaneous Reverse Current 10 125°C pF — Junction Capacitance 80 100 100 1,000 1 0.1 100°C 100 0.01 0.001 20 40 60 75°C 10 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Fig. 5 - Typical Thermal Impedance 100 Transient Thermal Impedance (¡C/W) 10 1 0.1 0.01 0.1 1 10 t — Pulse Duration (sec.) Document Number 88724 14-Nov-02 www.vishay.com 3