SBYV26C

SBYV26C Vishay General Semiconductor Glass Passivated Ultrafast Rectifier FEATURES • Cavity-free glass-passivated junction ® • Ideal for printed circuit boards • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency *Glass Encapsulation technique is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 d* ente Pat DO-204AL (DO-41) • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-204AL, molded plastic over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 1.0 A 600 V 30 A 30 ns 1.3 V 175 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5 mm) lead length at TL = 85 °C (Fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Non repetitive peak reverse energy (1) Operating junction and storage temperature range Note: (1) Peak reverse energy measured with 8/20 µs surge Document Number: 88735 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 SYMBOL VRRM VRMS VDC IF(AV) IFSM ERSM TJ, TSTG VALUE 600 420 600 1.0 30 5.0 - 65 to + 175 UNIT V V V A A mJ °C SBYV26C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Minimum avalanche breakdown voltage Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Max. reverse recovery time Maximum junction capacitance Maximum reverse recovery current slope 4.0 V, 1 MHz IF = 1 A, VR = 30 V, dif/dt = - 1 A/µs TEST CONDITIONS 100 µA 1.0 A TJ = 25 °C TJ = 175 °C TA = 25 °C TA = 165 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A SYMBOL VBR VF IR trr CJ dIr/dt VALUE 600 2.5 1.3 5.0 150 30 45 7.0 UNIT V V µA ns pF A/µs THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1)(2) SYMBOL RθJA RθJL VALUE 70 16 UNIT °C/W Notes: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, mounted on P.C.B. with 0.5 x 0.5" (12 x 12 mm) copper pads (2) Thermal resistance from junction to lead at 0.375" (9.5 mm) lead length with both leads attached to heatsink ORDERING INFORMATION (Example) PREFERRED P/N SBYV26C-E3/54 SBYV26C-E3/73 SBYV26CHE3/54 (1) UNIT WEIGHT (g) 0.339 0.339 0.339 0.339 PREFERRED PACKAGE CODE 54 73 54 73 BASE QUANTITY 5500 3000 5500 3000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging 13" diameter paper tape and reel Ammo pack packaging SBYV26CHE3/73 (1) Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.2 1.8 TL 1.6 Lead Mounted on Heatsink Average Forward Rectified Current (A) D = 0.2 D = 0.3 D = 0.1 D = 0.5 D = 0.8 1.0 Average Power Loss (W) 1.4 D = 1.0 1.2 1.0 0.8 0.6 0.4 0.2 D = tp/T 0 0.2 0.4 0.6 0.8 tp 1.0 1.2 T 0.8 TA 0.6 0.4 Mounted on P.C.B. 0.2 0 0 25 50 75 100 125 150 175 0 Temperature (°C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88735 Revision: 20-Aug-07 SBYV26C Vishay General Semiconductor 100 100 TJ = TJ Max. 10 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Peak Forward Surge Current (A) 10 Junction Capacitance (pF) 1 10 100 10 1 1 0.1 1 10 100 Number of Cycles at 50 Hz Reverse Voltage (V) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 6. Typical Junction Capacitance 100 100 10 TJ = 165 °C TJ = 125 °C 1 TJ = 25 °C Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 10 0.1 Pulse Width = 300 µs 1 % Duty Cycle 0.01 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Instantaneous Forward Characteristics Figure 7. Typical Transient Thermal Impedance 100 Instantaneous Reverse Leakage Current (µA) 10 TJ = 165 °C TJ = 125 °C 1 0.1 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 5. Typical Reverse Leakage Characteristics Document Number: 88735 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 SBYV26C Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88735 Revision: 20-Aug-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1