SD103AWS-V-G, SD103BWS-V-G, SD103CWS-V-G
Vishay Semiconductors
Small Signal Schottky Diodes
Features
• The SD103 series is a metal-on-silicon Schottky barrier device which is protected by a PN junction guard ring • The low forward voltage drop and fast switching make it ideal for protection of MOS devices, steering, biasing, and coupling diodes for fast switching and low logic level applications • Other applications are click suppression, efficient full wave bridges in telephone subsets, and blocking diodes in rechargeable low voltage battery systems • For general purpose applications • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
20145
Mechanical Data
Case: SOD-323 Weight: approx. 4.0 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box
Parts Table
Part SD103AWS-V-G SD103BWS-V-G SD103CWS-V-G Ordering code SD103AWS-V-G-18 or SD103AWS-V-G-08 SD103BWS-V-G-18 or SD103BWS-V-G-08 SD103CWS-V-G-18 or SD103CWS-V-G-08 Type marking Z6 Z7 Z8 Remarks Tape and reel Tape and reel Tape and reel
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter Peak reverse voltage Forward continuous current Single cycle surge Power dissipation Note 1) Valid provided that electrodes are kept at ambient temperature 10 µs square wave Test condition Part SD103AWS-V-G SD103BWS-V-G SD103CWS-V-G Symbol VRRM VRRM VRRM IF IFSM Ptot Value 40 30 20 350 2 200
1) 1)
Unit V V V mA A mW
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range Note 1) Valid provided that electrodes are kept at ambient temperature ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number 81142 Rev. 1.1, 13-May-11 Test condition Symbol RthJA Tj Tstg Value 500 1) 125 - 55 to + 150 Unit K/W °C °C
SD103AWS-V-G, SD103BWS-V-G, SD103CWS-V-G
Vishay Semiconductors Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter Leakage current Test condition VR = 3 0 V VR = 2 0 V VR = 1 0 V Forward voltage drop Diode capacitance Reverse recovery time IF = 20 mA IF = 200 mA VR = 0 V, f = 1 MHz IF = IR = 50 mA to 200 mA, recover to 0.1 IR Part SD103AWS-V-G SD103BWS-V-G SD103CWS-V-G Symbol IR IR IR VF VF CD trr 50 10 Min. Typ. Max. 5 5 5 370 600 Unit µA µA µA mV mV pF ns
Typical Characteristics
Tamb = 25 °C unless otherwise specified
1000 Tamb = 125 °C I F - Forward Current (mA)
1000
IR - Reverse Current (µA)
100 10 1 0.1 0.01
100 10
100 °C 75 °C 50 °C
1 0.1 0.01 0
20084
25 °C
0
0.2
0.4
0.6
0.8
1.0
5
10 15 20 25 30 35 40 45 50 VR - Reverse Voltage (V)
18488
VF - Forward Voltage (V)
Figure 1. Typical Variation of Forward Current vs. Forward Voltage
Figure 3. Typical Variation of Reverse Current at Various Temperatures
5 4 3 2 1 0 0
18489
100 C D - Diode Capacitance (pF) 1.0 1.5
18491
tp = 300 ms duty cycle = 2 %
I F - Forward Current (A)
10
0.5
1 0 10 20 30 40 50 VR - Reverse Voltage (V)
VF - Forward Voltage (V)
Figure 2. Typical High Current Forward Conduction Curve
Figure 4. Diode Capacitance vs. Reverse Voltage
For technical questions within your region, please contact one of the following: Document Number 81142 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.1, 13-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 2
SD103AWS-V-G, SD103BWS-V-G, SD103CWS-V-G
Vishay Semiconductors
50 VR - Reverse Voltage (V) 40 100 mA 30 I F = 400 mA 20 10 0
18492
200 mA
0
100 Tamb - Ambient Temperature (°C)
200
Figure 5. Blocking Voltage Deration vs. Temperature at Various Average Forward Currents
Package Dimensions in millimeters (inches): SOD-323
1.15 (0.045)
0.8 (0.031)
0.2 (0.008)
0.40 (0.016) 0.25 (0.010)
1.95 (0.077) 1.60 (0.063) Cathode bar
0.40 (0.016)
0.20 (0.008)
2.85 (0.112) 2.50 (0.098)
Foot print recommendation:
0.6 (0.024)
1.5 (0.059)
1.1 (0.043)
0° to 8
°
0.1 (0.004) max.
0.15 (0.006)
0.10 (0.004)
0.6 (0.024)
1.6 (0.063)
17443
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number 81142 Rev. 1.1, 13-May-11
0.6 (0.024)
Document no.:S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 5 - Date: 23.Sept.2009
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1