SD1553C30S30K

SD1553C..K Series Vishay High Power Products Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A FEATURES • • • • • • • • • • • 1650/1825 A DO-200AC (K-PUK) High power FAST recovery diode series 2.0 to 3.0 µs recovery time High voltage ratings up to 3000 V RoHS COMPLIANT High current capability Optimized turn-on and turn-off characteristics Low forward recovery Fast and soft reverse recovery Press PUK encapsulation Case style conform to JEDEC DO-200AC (K-PUK) Maximum junction temperature 150 °C Lead (Pb)-free PRODUCT SUMMARY IF(AV) TYPICAL APPLICATIONS • Snubber diode for GTO • High voltage freewheeling diode • Fast recovery rectifier applications MAJOR RATINGS AND CHARACTERISTICS PARAMETER IF(AV) IF(RMS) IFSM VRRM trr TJ 50 Hz 60 Hz Range TJ TEST CONDITIONS SD1553C..K S20 1825 Ths 55 3100 25 000 26 180 1800 to 2500 2.0 25 - 40 to 150 S30 1650 55 2800 22 000 23 000 1800 to 3000 3.0 V µs °C A UNITS A °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 18 SD1553C..S20K 22 25 18 22 SD1553C..S30K 25 28 30 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 1800 2200 2500 1800 2200 2500 2800 3000 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 1900 2300 2600 1900 2300 2600 2900 3100 75 IRRM MAXIMUM AT TJ = TJ MAXIMUM mA Document Number: 93169 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 SD1553C..K Series Vishay High Power Products FORWARD CONDUCTION PARAMETER Maximum average forward current at heatsink temperature Maximum RMS forward current SYMBOL TEST CONDITIONS 180° conduction, half sine wave Double side (single side) cooled 25 °C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop I 2 √t VF(TO)1 VF(TO)2 rf1 rf2 VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied SD1553C..K S20 S30 UNITS A °C Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A IF(AV) IF(RMS) 1825 (865) 1650 (790) 55 (85) 3100 25 000 26 180 21 030 55 (85) 2800 22 000 23 000 18 500 19 370 2421 2210 1712 1563 24 210 1.31 1.45 0.32 A Sinusoidal half wave, initial TJ = TJ maximum 22 010 3126 2854 2210 2018 31 260 1.15 1.29 0.27 0.25 2.23 kA2s t = 0.1 to 10 ms, no voltage reapplied (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum (I > π x IF(AV)), TJ = TJ maximum (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum (I > π x IF(AV)), TJ = TJ maximum Ipk = 4000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave kA2√s V mΩ 0.30 2.60 V RECOVERY CHARACTERISTICS MAXIMUM VALUE AT TJ = 25 °C CODE trr AT 25 % IRRM (µs) 2.0 3.0 1000 100 - 50 TEST CONDITIONS Ipk SQUARE PULSE (A) TYPICAL VALUES AT TJ = 150 °C IFM dI/dt (A/µs) Vr (V) trr AT 25 % IRRM (µs) 4.5 5.0 Qrr (µC) 650 780 Irr (A) dir dt trr t Qrr IRM(REC) S20 S30 240 260 THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating and storage temperature range Maximum thermal resistance, case junction to heatsink Mounting force, ± 10 % Approximate weight Case style See dimensions - link at the end of datasheet SYMBOL TJ, TStg RthJ-hs DC operation single side cooled DC operation double side cooled TEST CONDITIONS VALUES - 40 to 150 0.04 0.02 22 250 (2250) 425 UNITS °C K/W N (kg) g DO-200AC (K-PUK) www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93169 Revision: 14-May-08 SD1553C..K Series Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A ΔRthJ-hs CONDUCTION CONDUCTION ANGLE 180° 120° 90° 60° 30° SINUSOIDAL CONDUCTION SINGLE SIDE 0.0018 0.0021 0.0027 0.0039 0.0067 DOUBLE SIDE 0.0019 0.0021 0.0027 0.0039 0.0067 RECTANGULAR CONDUCTION SINGLE SIDE 0.0012 0.0021 0.0029 0.0041 0.0068 DOUBLE SIDE 0.0012 0.0021 0.0029 0.0041 0.0068 TJ = TJ maximum K/W TEST CONDITIONS UNITS Vishay High Power Products Note • The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC 1 60 M a x im u m A llo w a b le H e a t sin k T e m p e ra t u re (°C ) 1 40 1 20 Maxim um Allowable Heatsink Tem perature (°C) SD 1 5 5 3 C ..S 2 0 K S e rie s (Sin g le Sid e C o o le d ) R th J- hs (D C ) = 0 .0 4 K / W 160 140 120 100 80 60 40 0 200 400 SD 1553C..S30K Series (Single Side Cooled) R thJ-hs (D C) = 0.04 K/W C o nduc tion A ng le 1 00 80 60 40 0 200 400 600 800 1 0 00 1 2 00 A v e ra g e F o rw a r d C u rre n t (A ) 30° 18 0° 60° 90° 12 0° C o ndu ctio n A ng le 30° 60° 90° 600 800 120° 180° 1000 1200 Average Forward Curren t (A) Fig. 1 - Current Ratings Characteristics Fig. 3 - Current Ratings Characteristics 160 Maxim um Allow able Heatsin k T em perature (°C) 140 120 100 C o ndu c tio n Pe rio d 160 Maxim um Allowable Heatsink Tem peratu re ( °C) SD1553C..S20K Series (Sin gle Side Cooled) R th J- hs (DC) = 0.04 K/W 140 120 100 80 60 40 20 0 400 800 1200 1600 2000 Average Forward Current (A) 30° 60° 90° 120° 180° DC C o nduc tio n P e rio d SD1553C..S30K Series (Single Sid e Cooled ) Rth J-hs (DC) = 0.04 K/W 80 60 40 20 0 0 400 800 1200 1600 2000 Average Forward Curren t (A) 30° 60° 90° 120° 180° DC Fig. 2 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Document Number: 93169 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 SD1553C..K Series Vishay High Power Products Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A 160 Maximum Allowable H eatsink Temperature (°C) 140 120 100 80 60 40 30° 20 0 500 1000 1500 2000 2500 3000 Average Forward Curren t (A) 90° 60° 120° 180° DC Co n du ctio n Pe rio d °C ) 160 140 120 100 80 60 40 M a x im u m A llo w a b le H e a ts in k T e m p e ra t u re ( S D 1 5 5 3 C ..S 2 0 K Se rie s (D o u b le S id e C o o le d ) R th J- hs (D C ) = 0 .0 2 K / W SD 1553C..S30K Series (Double Side Cooled) R th J- hs (DC) = 0.02 K/W C o ndu c tio n A ng le 60 ° 30° 0 500 1 00 0 90° 1 2 0° 1 8 0° 2 0 00 2 5 00 20 15 0 0 A v e ra g e F o r w a rd C u rre n t (A ) Fig. 5 - Current Ratings Characteristics Fig. 8 - Current Ratings Characteristics 160 Maxim um Allowable Heatsink Tem perature (°C) M a xim u m A v e ra g e F o rw a rd Po w e r Lo ss (W ) 140 120 100 80 60 40 30° 20 0 500 1000 1500 2000 2500 3000 3500 Average Forward Curren t (A) 90° 60° 120° 180° DC C o nd uc tio n Pe rio d 5 00 0 SD 1553C..S20K Series (Double Side Cooled) Rth J- hs (DC) = 0.02 K/W 4 50 0 4 00 0 3 50 0 3 00 0 2 50 0 2 00 0 1 50 0 1 00 0 5 00 0 0 50 0 10 0 0 1 50 0 2 0 00 A v e ra g e F o rw a r d C u rre n t (A ) C on duc tion Ang le 1 8 0° 1 2 0° 90° 60° 30° R M S Lim it SD 1 5 5 3 C ..S2 0 K Se r ie s TJ = 1 5 0° C Fig. 6 - Current Ratings Characteristics Fig. 9 - Forward Power Loss Characteristics 160 Maxim um Allowab le Heatsin k Tem pera ture (°C) 140 120 7000 Maxim um Average Forward Pow er Loss (W ) SD1553C..S30K Series (D ouble Side Cooled) R th J-hs (DC) = 0.02 K/W 6000 5000 4000 RMS L im it 3000 2000 1000 0 0 500 1000 1500 2000 2500 3000 3500 Average Forwa rd Current (A) C o ndu ctio n P e rio d DC 180° 120° 90° 60° 30° C o nduc tio n A ng le 100 80 30° 60 40 0 400 800 1200 1600 2000 Average Forward Current (A) 60° 90° 120° 180° SD 1553C..S20K Series TJ = 150°C Fig. 7 - Current Ratings Characteristics Fig. 10 - Forward Power Loss Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 93169 Revision: 14-May-08 SD1553C..K Series Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A 50 0 0 M a xim u m A v e ra g e F o rw a rd P ow e r Lo s s (W ) Peak Half Sine Wave Forw ard Curren t (A) 1 8 0° 1 2 0° 90° 60° 30° Vishay High Power Products 25000 22500 20000 17500 15000 12500 10000 7500 40 0 0 30 0 0 R M S Lim it Maxim um Non Repetitive Surge Curren t V ersus Pulse Train Duration . In itial TJ = 150 °C No Voltage Reapplied Rated V RR M Reapplied 20 0 0 Co nd uc tio n A ng le 10 0 0 S D 1 5 5 3 C ..S3 0 K S e rie s TJ = 1 5 0° C 0 500 1 0 00 1 50 0 2 00 0 SD1553C..S20K Series 0.1 Pulse T rain Duration (s) 1 0 A v e ra g e Fo rw a rd C u rre n t (A ) 5000 0.01 Fig. 11 - Forward Power Loss Characteristics Fig. 14 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 7000 Maxim um Average Forw ard Power Loss ( W ) 6000 5000 4000 RMS Limit 3000 C o nd uc tio n Pe rio d 20 0 00 P e a k H a lf S in e W a v e Fo rw a rd C u rr e n t (A ) DC 180° 120° 90° 60° 30° 18 0 00 16 0 00 14 0 00 12 0 00 10 0 00 8 0 00 6 0 00 1 A t A n y R a t e d Lo a d C o n d itio n A n d W it h Ra t e d V RR M A p p lie d Fo llo w in g S u rg e . In itia l TJ = 1 5 0° C @ 6 0 H z 0 .0 0 8 3 s @ 5 0 H z 0 .0 1 0 0 s 2000 1000 0 0 500 1000 1500 2000 2500 3000 Average Forward Current (A) SD 1553C..S30K Series TJ = 150°C SD 1 5 5 3 C ..S3 0 K S e rie s 10 10 0 Nu m be r O f E qua l A m plitud e Ha lf C yc le Cu rre nt Pulses (N ) Fig. 12 - Forward Power Loss Characteristics Fig. 15 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 2 50 0 0 P ea k H a lf S in e W a v e Fo rw a rd C u rre n t (A ) 2 25 0 0 2 00 0 0 1 75 0 0 1 50 0 0 1 25 0 0 1 00 0 0 75 0 0 50 0 0 1 P e a k H alf Sin e W a v e F o rw a rd C u rre n t (A ) A t A n y R a t e d Lo a d C o n d it io n A n d W ith R a t e d V RR M A p p lie d Fo llo w in g S u rg e . In it ia l TJ = 1 5 0 °C @ 6 0 H z 0 .0 0 8 3 s @ 5 0 H z 0 .0 1 0 0 s 24000 22000 20000 18000 16000 14000 12000 10000 8000 M a xim u m N o n R e p e t itiv e S ur g e C urre n t V e rsu s P u lse Tra in D u ra t io n . In it ia l T J = 1 5 0 °C N o V o lt a g e R e a pp lie d R a t e d V RR MRe a p p lie d SD 1 5 5 3 C ..S2 0 K S e rie s SD 1 5 5 3 C ..S 3 0 K S e rie s 6000 4000 0.01 0.1 P u lse Tr a in D u ra tio n ( s) 1 10 10 0 N um be r O f E qua l Am p litude Ha lf C yc le C urrent Pulse s (N ) Fig. 13 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 16 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Document Number: 93169 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 SD1553C..K Series Vishay High Power Products Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A 1 00 0 0 TJ = 2 5°C In st a n t a n e o u s F o rw a rd C u rre n t (A ) In stantaneous Forwa rd Current (A) TJ = 1 5 0° C 10000 1000 TJ = 25°C TJ = 150°C 1 00 0 SD1553C..S20K Serie s 100 0.5 S D 1 5 5 3 C ..S3 0 K S e rie s 100 1 1.5 2 2.5 3 3.5 4 1 1 .5 2 2 .5 3 3 .5 4 4 .5 Instantan eous Forw ard Voltag e (V) In st a n ta n e o u s F o rw a rd V o lt a g e (V ) Fig. 17 - Forward Voltage Drop Characteristics Fig. 18 - Forward Voltage Drop Characteristics 0 .1 T ra n sie n t T h e rm a l Im p e d a n c e Z thJ-hs (K / W ) St e a d y St a te V a lu e R th J-hs = 0 .0 4 K / W ( Sin g le Sid e C o o le d ) 0 .0 1 R t hJ- hs = 0 .0 2 K / W ( D o u ble Side C o o le d ) ( D C O p e ra t io n ) 0 .0 0 1 S D 1 5 5 3 C ..S 2 0 /S 3 0 K Se rie s 0 .0 0 0 1 0 .0 0 1 0. 01 0 .1 1 10 10 0 S q ua re W a v e Pu lse D ura tio n ( s) Fig. 19 - Thermal Impedance ZthJ-hs Characteristic 80 VFP I 100 TJ = 1 5 0° C Fo rw a rd R e c o v e ry (V ) VFP I TJ = 1 5 0°C Fo rw a rd R e c o v e ry (V ) 60 80 60 T J = 2 5° C 40 40 TJ = 2 5° C 20 SD 1 5 5 3 C ..S 2 0 K Se rie s 0 0 4 00 8 00 12 0 0 1 6 00 20 0 0 R a t e O f R ise O f F o rw a rd C u rre n t - d i/d t (A / u s) 20 S D 1 5 5 3 C ..S 3 0 K Se r ie s 0 0 40 0 80 0 1 2 00 1 60 0 2 00 0 R ate O f Ri se O f Fo rw ard Cu rre nt - di/ dt (A/ u s) Fig. 20 - Typical Forward Recovery Characteristics Fig. 21 - Typical Forward Recovery Characteristics www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 93169 Revision: 14-May-08 SD1553C..K Series Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A 7 .5 M a x im u m R e v e r se R e c o v e r y T im e - Trr (µ s) 7 6 .5 6 5 .5 5 4 .5 4 3 .5 3 2 .5 10 10 0 10 0 0 I FM = 1 50 0 A Sin e Pulse 1 00 0 A 50 0 A Vishay High Power Products 8 .5 SD 1 5 5 3 C ..S 2 0 K S e rie s TJ = 1 5 0 °C ; V r > 1 0 0 V M a x im u m R e v e rse R e c o v e ry T im e - T rr (µ s) 8 7 .5 7 6 .5 6 5 .5 5 4 .5 4 3 .5 10 1 00 10 0 0 I FM = 150 0 A Sine Pulse 100 0 A 500 A S D 1 5 5 3 C ..S 3 0 K S e rie s TJ = 1 5 0 °C ; V r > 1 0 0 V Rate O f Fall O f Fo rw ard C urre nt - di/dt (A /µs) Ra te Of Fall O f Fo rw ard C urrent - di/dt ( A/µs) Fig. 22 - Recovery Time Characteristics Fig. 25 - Recovery Time Characteristics 1 40 0 M ax im u m R e v e rse R e c o v e ry C h a rg e - Q rr (µ C ) 1 20 0 1 00 0 8 00 6 00 4 00 2 00 0 0 50 1 0 0 15 0 20 0 25 0 30 0 S D 1 5 5 3 C ..S2 0 K Se rie s TJ = 1 5 0 °C ; V r > 1 0 0 V I FM = 15 00 A Sine Pulse 1 60 0 M ax im u m R e v e rse R e c o v e ry C h a rg e - Q rr (µ C ) 1 40 0 1 20 0 1 00 0 80 0 60 0 40 0 20 0 0 0 50 10 0 1 5 0 2 00 25 0 30 0 SD 1 5 5 3 C ..S3 0 K S e rie s TJ = 1 5 0 ° C ; V r > 1 0 0 V I FM = 150 0 A Sine Pu lse 10 00 A 500 A 10 00 A 5 00 A Rate O f Fall O f Fo rw ard C urre nt - di/dt (A /µs) Rate O f Fall O f Fo rw ard C urre nt - di/dt (A /µs) Fig. 23 - Recovery Charge Characteristics Fig. 26 - Recovery Charge Characteristics 70 0 M a xim u m R e v e r se Re c o v e ry C ur re n t - Irr (A ) 60 0 50 0 10 00 A 70 0 M a xim u m R e v e rse R e c o v e ry C urre n t - Irr (A ) I FM = 1 500 A Sine Pulse 60 0 50 0 40 0 30 0 20 0 10 0 0 0 50 I FM = 1 50 0 A Sine Pulse 1 00 0 A 5 00 A 40 0 500 A 30 0 20 0 10 0 0 0 50 1 00 1 50 20 0 2 5 0 3 0 0 SD 1 5 5 3 C ..S2 0 K Se rie s TJ = 1 5 0 ° C ; V r > 1 0 0 V SD 1 5 5 3 C ..S3 0 K Se rie s TJ = 1 5 0 ° C ; V r > 1 0 0 V 10 0 15 0 2 00 25 0 30 0 Rate O f Fall O f Fo rw ard Cu rrent - d i/dt ( A/µs) Rate O f Fa ll O f Fo rward C urren t - di/dt (A/µs) Fig. 24 - Recovery Current Characteristics Fig. 27 - Recovery Current Characteristics Document Number: 93169 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 7 SD1553C..K Series Vishay High Power Products Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A 1E4 4 2 6 10 jo u le s pe r p ulse 1 0 00 6 00 10 0 50 H z 4 0 0 20 0 1E4 Peak Forward Curren t (A) 1 0.6 0. 4 Peak Forw ard Current (A) 2000 3 00 0 4 00 0 1E3 0.2 0.1 1E3 6000 1 00 0 0 15 0 0 0 20 0 0 0 tp S D 1 5 5 3 C ..S2 0K Se rie s Tr ape z oi dal Pu ls e TC = 5 5°C , V RRM = 8 0 0 V d v /d t = 1 0 0 0V /u s, d i/ dt = 3 0 0 A / us tp S D 1 5 5 3 C..S2 0 K Se ri es S i nu soi da l Pu lse TJ = 1 5 0°C , V RRM = 8 0 0V d v/ d t = 1 0 0 0 V/ µs 1E2 1E1 1E 2 1E3 1E4 1E2 1E 1 1E2 1E3 1E4 Pulse Basew idth (µs) Pulse Basewidth (µs) Fig. 28 - Maximum Total Energy Loss Per Pulse Characteristics 1E4 20 0 0 3000 40 0 0 10 0 0 4 00 20 0 10 0 5 0 Hz Fig. 31 - Frequency Characteristics 1E4 10 jo ules p er pulse Peak Forward Current (A) Peak F orward Cu rrent (A) 6000 10 0 0 0 4 2 1 0 .8 0. 6 0. 4 6 1E3 15 0 00 2 0 00 0 tp S D 1 5 5 3 C ..S2 0 K Se ri es S in uso i da l Pu lse T = 5 5°C , V RRM = 8 0 0 V C d v / dt = 1 00 0V / us 1E3 tp 1E2 1E1 1E2 1E 3 1E4 1E2 1E 1 S D 1 5 5 3 C ..S2 0 K S er ie s Tra pe zo id al Pu lse TJ = 1 5 0°C , V RRM = 8 0 0 V d v /d t = 1 0 0 0 V / µs d i/ dt = 1 0 0 A /µ s 1E2 1E3 1E4 Pulse Basewid th (µs) Pulse Ba sew idth (µs) Fig. 29 - Frequency Characteristics Fig. 32 - Maximum Total Energy Loss Per Pulse Characteristics 1E 4 1E4 10 jo ules p er p ulse Peak Forw ard Current (A) 4 2 Peak Forward Current (A) 6 2 00 0 6 00 0 1 0 00 0 1 0 00 1 00 50 Hz 40 0 20 0 1E3 0. 8 0 .6 0 .4 1 1E 3 1 50 0 0 20 0 0 0 tp S D 1 55 3C ..S2 0 K Se ri es Tra pez o idal Pu lse T = 5 5°C , V RRM= 8 0 0 V C d v / dt = 1 0 0 0 V/ us, d i/ d t = 1 0 0 A / us tp 1E2 1E1 S D 1 5 5 3 C ..S2 0 K S eri es Trap e zoi dal Puls e T = 1 5 0°C, V RRM = 8 0 0 V J d v/ d t = 1 0 0 0 V/ µs d i/d t = 3 0 0 A / µs 1E2 1E3 1E4 1E 2 1E 1 1E2 1E 3 1E4 Pulse Basew idth (µs) Pulse Basewidth (µs) Fig. 30 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 33 - Frequency Characteristics www.vishay.com 8 For technical questions, contact: ind-modules@vishay.com Document Number: 93169 Revision: 14-May-08 SD1553C..K Series Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A 1E4 4 6 10 jo ule s p er p ulse 2 00 0 4 00 0 6000 50 Hz 20 0 1 00 1 0 0 0 4 00 Vishay High Power Products 1E 4 Peak Forward Current (A) 1 0 .6 0 .4 1E3 0 .2 Peak Forward Current (A) 2 1E 3 10 0 0 0 15 0 0 0 20 0 0 0 tp S D 1 5 5 3 C ..S3 0 K Se rie s T rape zo i dal Pul se TC = 5 5° C, V RRM = 1 0 0 0 V d v / dt = 10 0 0 V/ u s, d i/ d t = 3 0 0 A / us tp S D 1 5 5 3 C. .S3 0 K Se r ie s S in uso id al Pu l se TJ = 1 50° C , V RRM = 1 0 0 0V d v / dt = 1 00 0V / µs 1E2 1E1 1E2 1E3 1E4 1E 2 1E1 1E2 1E3 1E 4 Pulse Basew id th (µs) Pulse Ba sew idth (µs) Fig. 34 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 37 - Frequency Characteristics 1E4 3000 2 00 0 1 0 00 4 00 20 0 1 00 5 0 Hz 1E4 1 0 jo ule s pe r pulse Peak Forward Curren t (A) 4000 6 00 0 Peak Forward Current (A) 6 4 2 1 1E3 0. 8 0 .6 S D 1 5 5 3 C..S3 0 K Se rie s Tr ape zo ida l Pu lse TJ = 1 5 0°C , V RRM = 1 0 0 0 V d v / dt = 10 0 0V / µs d i/ d t = 1 0 0 A / µs 1 0 00 0 tp S D 1 5 5 3 C ..S3 0 K Se r ie s S i n uso id al P u lse T = 5 5°C, VR R M = 1 0 0 0 V C d v / d t = 1 0 0 0 V / us tp 1E3 1E 1 1E2 1E3 1E4 1E2 1E1 1E2 1E3 1E4 P ulse Basewidth (µs) Pulse Basew idth (µs) Fig. 35 - Frequency Characteristics Fig. 38 - Maximum Total Energy Loss Per Pulse Characteristics 1E 4 1E4 1 0 jo u le s pe r pu lse Peak Forward Current (A) 6 4 2 Peak Forward Current (A) 4 00 6 00 1000 2 00 0 4 0 00 20 0 100 50 H z 1E3 1 0 .6 0 .8 tp 1E2 1E1 S D 1 5 5 3 C ..S3 0 K Se rie s Tra pe zo ida l Pu lse TJ = 1 5 0°C , V RRM = 1 0 0 0 V d v /d t = 1 0 0 0 V /µ s d i/ dt = 30 0A / µ s tp S D 1 5 5 3 C.. S3 0 K Se r ie s T rap ez o idal Pul se T = 5 5°C , V R R M = 1 0 0 0 V C d v/ dt = 1 0 0 0 V/ u s, d i/d t = 10 0A / u s 1E 2 1E3 1E4 1E 3 1E1 1E 2 1E 3 1E4 Pulse Basewid th (µs) Pulse Basew idth (µs) Fig. 36 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 39 - Frequency Characteristics Document Number: 93169 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 9 SD1553C..K Series Vishay High Power Products ORDERING INFORMATION TABLE Fast Recovery Diodes (Hockey PUK Version), 1650/1825 A Device code SD 1 1 2 3 4 5 6 7 155 2 Diode 3 3 C 4 30 5 S30 6 K 7 Essential part number 3 = Fast recovery C = Ceramic PUK Voltage code x 100 = VRRM (see Voltage Ratings table) trr code K = PUK case DO-200AC (K-PUK) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95247 www.vishay.com 10 For technical questions, contact: ind-modules@vishay.com Document Number: 93169 Revision: 14-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1