SD2000C04L

SD2000C..L Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A FEATURES • Wide current range • High voltage ratings up to 1000 V • High surge current capabilities • Diffused junction • Hockey PUK version • Case style DO-200AB (B-PUK) DO-200AB (B-PUK) RoHS COMPLIANT • Lead (Pb)-free TYPICAL APPLICATIONS • Converters PRODUCT SUMMARY IF(AV) 2100 A • Power supplies • High power drives • Auxiliary system supplies for traction applications MAJOR RATINGS AND CHARACTERISTICS PARAMETER IF(AV) TEST CONDITIONS VALUES 2100 Ths 55 3900 Ths 50 Hz 60 Hz 50 Hz 60 Hz Range 25 23 900 25 000 2857 2608 400 to 1000 - 40 to 180 UNITS A °C A °C A IF(RMS) IFSM I2 t VRRM TJ kA2s V °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 04 SD2000C..L 08 10 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 400 800 1000 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 500 900 1100 60 IRRM MAXIMUM AT TJ = 180 °C mA Document Number: 93540 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 SD2000C..L Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A FORWARD CONDUCTION PARAMETER Maximum average forward current at heatsink temperature Maximum RMS forward current SYMBOL IF(AV) IF(RMS) TEST CONDITIONS 180° conduction, half sine wave Double side (single side) cooled 25 °C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop I2√t VF(TO)1 VF(TO)2 rf1 rf2 VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 2100 (1040) 55 (85) 3900 23 900 25 000 20 100 Sinusoidal half wave, initial TJ = TJ maximum 21 000 2857 2608 2020 1844 28 570 0.74 0.86 0.13 mΩ (I > π x IF(AV)), TJ = TJ maximum Ipk = 6000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 0.12 1.55 V kA2√s V kA2s A UNITS A °C t = 0.1 to 10 ms, no voltage reapplied (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum (I > π x IF(AV)), TJ = TJ maximum (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink Mounting force, ± 10 % Approximate weight Case style See dimensions - link at the end of datasheet SYMBOL TJ TStg RthJ-hs DC operation single side cooled DC operation double side cooled TEST CONDITIONS VALUES - 40 to 180 - 55 to 200 0.073 0.031 14 700 (1500) 255 K/W N (kg) g UNITS °C DO-200AB (B-PUK) ΔRthJ-hs CONDUCTION CONDUCTION ANGLE 180° 120° 90° 60° 30° SINUSOIDAL CONDUCTION SINGLE SIDE 0.009 0.011 0.014 0.020 0.036 DOUBLE SIDE 0.009 0.011 0.014 0.020 0.036 RECTANGULAR CONDUCTION SINGLE SIDE 0.006 0.011 0.015 0.021 0.036 DOUBLE SIDE 0.006 0.011 0.015 0.021 0.036 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note • The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93540 Revision: 14-May-08 SD2000C..L Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 2100 A 180 M a xim u m A llo w a b le H e a ts in k Te m p e ra t u re (°C ) 160 140 120 100 80 60 40 0 2 00 40 0 6 00 8 0 0 10 0 0 1 2 00 1 4 00 A v e ra g e F o rw a rd C u rre n t (A ) 60 ° 18 0° 90 ° 120° C o nduc tio n An gle Maxim um Allowab le Heatsink Tem perature ( °C) SD 2 0 0 0 C ..L Se rie s (Sin g le S id e C o o le d ) R th J-hs (D C ) = 0 .0 7 3 K / W 180 160 140 120 100 80 30° 60 40 20 0 0 1000 2000 3000 4000 Average Forward Curren t (A) 60° 90° 120° 180° DC C o ndu ctio n Pe rio d SD2000C..L Series (Double Side Cooled) R thJ-h s (DC) = 0.031 K/W 30° Fig. 1 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics 1 80 Maxim um Allowable Heatsink Temperatur e (°C) 1 60 1 40 1 20 1 00 80 60 40 20 0 0 5 00 1000 1 500 200 0 2 500 Average Forward Current (A) 30° 60 ° 90 ° 120° 180° DC C o nduc tion Pe riod 4000 M aximum Average Forward Power L oss (W) SD 2000C..L Series (Single Sid e Cooled) R thJ-h s (DC) = 0.073 K/W 3500 3000 2500 2000 1500 1000 500 0 0 500 1000 1500 2000 2500 Average Forward Curren t (A) C on duc tio n A ngle 180° 120° 90° 60° 30° RM S Limit SD2000C..L Series TJ = 180°C Fig. 2 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Maxim um Allowable Heatsin k Tem perature ( °C) Maxim um Average Forward Pow er Loss (W ) 180 160 140 120 100 80 60 40 20 0 0 500 5000 SD2000C..L Series (Double Side Cooled) R th J- hs (DC) = 0.031 K/W 4500 4000 3500 3000 2500 2000 1500 1000 500 0 0 1000 2000 3000 4000 Average Forwa rd Current (A) C o ndu ctio n Pe rio d DC 180° 120° 90° 60° 30° RMS Limit C o nd uctio n A ng le 30° 60° 90° 120° 180° SD 2000C..L Series TJ = 180°C 1000 1500 2000 2500 Average Forward Current (A) Fig. 3 - Current Ratings Characteristics Fig. 6 - Forward Power Loss Characteristics Document Number: 93540 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 SD2000C..L Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A 25000 Peak Half Sine W ave Forward Current (A) Peak Half Sine W ave Forward Curren t (A) At Any Rated Load Cond ition An d W ith Rated V RRM Applied Following Surge. Initial TJ = 180 °C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 30000 M aximum Non Repet itive Surge Current Versus Pulse Train Duration. In itial TJ = 180 °C No V oltage Reapplied Rated V R RM Reapplied 25000 20000 20000 15000 15000 10000 SD2000C..L Series 5000 1 10 10 0 Nu m be r O f E qua l A m p litude H alf C y cle C urre nt P ulse s (N ) 10000 SD 2000C..L Series 5000 0.01 0.1 Pulse Train Duration (s) 1 Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 100000 In stantaneous F orward Current (A) TJ = 25°C 10000 TJ = 180°C 1000 SD2000C..L Series 100 0.5 1 1.5 2 2.5 3 3.5 In stantaneous Forward V oltage (V ) Fig. 9 - Forward Voltage Drop Characteristics 0 .1 T ra n sie n t T h e rm a l Im p e d a n c e Z thJ-hs ( K / W ) SD 2 0 0 0 C ..L Se rie s 0 .0 1 S te ad y St a te V alu e R th J-h s = 0 .0 7 3 K /W ( S in g le Side C o o le d) R th J-h s = 0 .0 3 1 K /W ( D o ub le S id e C o o le d ) ( D C O p e ra t io n ) 0 .0 0 1 0 .0 0 1 0 .0 1 0 .1 1 10 10 0 Sq u are W a v e Pu lse D u ra tio n ( s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 93540 Revision: 14-May-08 SD2000C..L Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 2100 A ORDERING INFORMATION TABLE Device code SD 1 1 2 3 4 5 6 200 2 Diode 0 3 C 4 10 5 L 6 Essential part number 0 = Standard recovery C = Ceramic PUK Voltage code x 100 = VRRM (see Voltage Ratings table) L = PUK case DO-200AB (B-PUK) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95248 Document Number: 93540 Revision: 14-May-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1