SE10PJ

New Product SE10Pb thru SE10PJ Vishay General Semiconductor Surface Mount ESD Capability Rectifiers eSMP ® Series FEATURES • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Oxide planar chip junction • Low forward voltage drop • Typical IR less than 0.1 μA • ESD capability • Meets MSL level 1, per LF maximum peak of 260 °C • AEC-Q101 qualified 1.0 A DO-220AA (SMP) J-STD-020, PRIMARY CHARACTERISTICS IF(AV) VRRM IR VF at IF = 1.0 A TJ max. 100 V to 600 V 5 μA 0.86 V 175 °C • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test TYPICAL APPLICATIONS General purpose, polarity protection, and rail-to-rail protection in both consumer and automotive applications. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Average forward current Peak forward surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM IF(AV) IFSM TJ, TSTG SYMBOL SE10PB 10B 100 SE10PD 10D 200 1.0 25 - 55 to + 175 SE10PG 10G 400 SE10PJ 10J 600 V A A °C UNIT Document Number: 89024 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SE10Pb thru SE10PJ Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum reverse current Maximum reverse recovery time Typical junction capacitance TEST CONDITIONS IF = 1.0 A TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL VF (1) TYP. 0.960 0.860 4.8 780 7.0 MAX. 1.05 V 0.95 5.0 μA 50 ns pF UNIT Rated VR IR (2) trr CJ IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted) PARAMETER SYMBOL RJA Typical thermal resistance (1) SE10PB SE10PD 132 15 30 SE10PG SE10PJ UNIT RJL (1) RJC (1) °C/W (1) Note Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. RJL - is measured at the terminal of cathode band. RJC is measured at the top center of the body. IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD AEC-Q101-001 AEC-Q101-002 JESD22-A114 JESD22-A114 IEC 61000-4-2 (2) TEST TYPE Human body model (contact mode) Machine model (contact mode) Human body model (contact mode) Machine model (contact mode) Human body model (contact mode) Human body model (air-discharge mode) (1) TEST CONDITIONS C = 100 pF, R = 1.5  C = 200 pF, R = 0  C = 150 pF, R = 1.5  C = 200 pF, R = 0  C = 150 pF, R = 150  C = 150 pF, R = 150  SYMBOL CLASS H3B M4 3B VALUE > 8 kV > 400 kV > 8 kV > 400 kV > 8 kV > 15 kV VC C 4 4 Notes (1) Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV (2) System ESD standard ORDERING INFORMATION (Example) PREFERRED P/N SE10PJ-M3/84A SE10PJ-M3/85A SE10PJHM3/84A (1) UNIT WEIGHT (g) 0.024 0.024 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A 84A 85A BASE QUANTITY 3000 10 000 3000 10 000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel SE10PJHM3/85A (1) (1) Note Automotive grade www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89024 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SE10Pb thru SE10PJ Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1.2 Resistive or Inductive Load 100 Instantaneous Reverse Current (µA) Average Forward Current (A) 1.0 TJ = 175 °C 10 TJ = 150 °C 0.8 0.6 1 0.4 TL Measured at the Cathode Band Terminal 0.1 TJ = 25 °C 0.2 0 0 25 50 75 100 125 150 175 0.01 10 20 30 40 50 60 70 80 90 100 Lead Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve 1.2 D = 0.5 1.0 D = 0.8 Fig. 4 - Typical Instantaneous Forward Characteristics 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 D = 0.2 0.8 D = 0.1 0.6 T D = 1.0 0.4 Junction Capacitance (pF) 1.2 Average Power Loss (W) D = 0.3 1 0.2 D = tp/T tp 0.1 0.1 0 0 0.2 0.4 0.6 0.8 1.0 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics 10 Fig. 5 - Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) TJ = 175 °C TJ = 150 °C 1 TJ = 25 °C 0.1 0.5 0.7 0.9 1.1 1.3 1.5 Instantaneous Forward Voltage (V) Fig. 3 - Forward Power Loss Characteristics Document Number: 89024 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SE10Pb thru SE10PJ Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) Cathode Band 0.012 (0.30) REF. 0.086 (2.18) 0.074 (1.88) 0.053 (1.35) 0.041 (1.05) 0.036 (0.91) 0.024 (0.61) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.025 0.030 (0.635) (0.762) 0.050 (1.27) www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 89024 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1