SGL41-30

BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • MELF Schottky rectifier • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C DO-213AB • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 1.0 A 20 V to 60 V 30 A 0.50 V, 0.70 V 125 °C, 150 °C MECHANICAL DATA Case: DO-213AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Denotes Schottky devices: 1st band is orange Polarity color bands (2nd band) voltage type Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range VRRM VRMS VDC IF(AV) IFSM dV/dt TJ TSTG - 55 to + 125 - 55 to + 150 SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 Gray 20 14 20 SGL41-30 Red 30 21 30 SGL41-40 Orange 40 28 40 1.0 30 10 000 - 55 to + 150 SGL41-50 Yellow 50 35 50 SGL41-60 Green 60 42 60 V V V A A V/µs °C °C UNIT Document Number: 88548 Revision: 29-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 47 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current at rated DC blocking voltage (1) Typical junction capacitance TEST CONDITIONS 1.0 A TA = 25 °C TA = 100 °C 4.0 V, 1.0 MHz SYMBOL VF BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 0.50 0.5 IR 10 110 5.0 80 mA SGL41-40 SGL41-50 SGL41-60 UNIT V 0.70 CJ pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum thermal resistance (1) SYMBOL RθJA RθJT BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 SGL41-40 75 30 SGL41-50 SGL41-60 UNIT °C/W Note: (1) Thermal resistance junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N SGL41-40-E3/96 SGL41-40-E3/97 BYM13-40-E3/96 BYM13-40-E3/97 SGL41-40HE3/96 (1) SGL41-40HE3/97 (1) BYM13-40HE3/96 (1) BYM13-40HE3/97 (1) UNIT WEIGHT (g) 0.137 0.137 0.137 0.137 0.137 0.137 0.137 0.137 PREFERRED PACKAGE CODE 96 97 96 97 96 97 96 97 BASE QUANTITY 1500 5000 1500 5000 1500 5000 1500 5000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.0 30 0.75 SGL41-20 to SGL41-40 P.C.B. Mounted on 0.24 x 0.24" (6.0 x 6.0 mm) Copper Land Areas Peak Forward Surge Current (A) Resistive or Inductive Load Average Forward Current (A) At Rated Td 8.3 ms Single Half Sine-Wave 25 20 0.50 SGL41-50 and SGL41-60 15 0.25 10 0 0 25 50 75 100 125 150 175 5 1 10 100 Terminal Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve www.vishay.com 48 Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number: 88548 Revision: 29-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor 100 1000 TJ = 125 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 TJ = 25 °C Junction Capacitance (pF) 100 0.1 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 10 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Instantaneous Reverse Current (mA) SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 10 TJ = 125 °C 1 0.1 TJ = 75 °C 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB Solderable Ends Mounting Pad Layout 0.138 (3.5) MAX. 1st Band D2 = 0 D1 + 0.008 (0.20) - D2 D1 = 0.105 (2.67) 0.095 (2.41) 0.118 (3.0) MIN. 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.022 (0.56) 0.018 (0.46) 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) Document Number: 88548 Revision: 29-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 49 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1