SIA406DJ

New Product SiA406DJ Vishay Siliconix N-Channel 12-V (D-S) MOSFET PRODUCT SUMMARY VDS (V) 12 RDS(on) (Ω) 0.0198 at VGS = 4.5 V 0.0222 at VGS = 2.5 V 0.0264 at VGS = 1.8 V ID (A)a 4.5 4.5 4.5 13.7 nC Qg (Typ.) FEATURES • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • New Thermally Enhanced PowerPAK® SC-70 Package - Small Footprint Area - Low On-Resistance • 100 % Rg Tested • Compliant to RoHS Directive 2002/95/EC PowerPAK SC-70-6L-Single 1 D 2 D 3 6 D 5 D S 4 S 2.05 mm G Part # code AHX XXX APPLICATIONS Marking Code D • Load Switch for Portable Devices • DC/DC Converters G 2.05 mm Lot Traceability and Date code S Ordering Information: SiA406DJ-T1-GE3 (Lead (Pb)-free and Halogen-free) N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Drain-Source Voltage Gate-Source Voltage °C)a TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C TC = 25 °C TA = 25 °C TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C Symbol VDS VGS ID IDM IS Limit 12 ±8 4.5a 4.5a 4.5a, b, c 4.5a, b, c 20 4.5a 2.9b, c 19 12 3.5b, c 2.2b, c - 55 to 150 260 Unit V Continuous Drain Current (TJ = 150 Pulsed Drain Current A Continuous Source-Drain Diode Current Maximum Power Dissipation PD TJ, Tstg W Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature)d, e °C THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambientb, f Maximum Junction-to-Case (Drain) t≤5s Steady State Symbol RthJA RthJC Typical 28 5.3 Maximum 36 6.5 Unit °C/W Notes: a. Package limited b. Surface mounted on 1" x 1" FR4 board. c. t = 5 s. d. See solder profile (www.vishay.com/ppg?73257). The PowerPAK SC-70 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components. f. Maximum under steady state conditions is 80 °C/W. Document Number: 65361 S09-1924-Rev. A, 28-Sep-09 www.vishay.com 1 New Product SiA406DJ Vishay Siliconix SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductancea Dynamicb Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulse Diode Forward Current Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Reverse Recovery Fall Time Reverse Recovery Rise Time IS ISM VSD trr Qrr ta tb IF = 8.6 A, dI/dt = 100 A/µs, TJ = 25 °C IS = 8.6 A, VGS = 0 V 0.8 22 7 8 14 TC = 25 °C 4.5c 20 1.2 33 14 A V ns nC ns Ciss Coss Crss Qg Qgs Qgd Rg td(on) tr td(off) tf td(on) tr td(off) tf VDD = 6 V, RL = 0.7 Ω ID ≅ 8.6 A, VGEN = 8 V, Rg = 1 Ω VDD = 6 V, RL = 0.7 Ω ID ≅ 8.6 A, VGEN = 4.5 V, Rg = 1 Ω f = 1 MHz 0.5 VDS = 6 V, VGS = 5 V, ID = 10.8 A VDS = 6 V, VGS = 4.5 V, ID = 10.8 A VDS = 6 V, VGS = 0 V, f = 1 MHz 1380 345 155 15.2 13.7 2.6 1.1 2.5 10 9 40 14 6 11 27 9 5 20 18 60 21 12 17 41 18 ns Ω 23 21 nC pF VDS ΔVDS/TJ ΔVGS(th)/TJ VGS(th) IGSS IDSS ID(on) RDS(on) gfs VGS = 0 V, ID = 250 µA ID = 250 µA VDS = VGS, ID = 250 µA VDS = 0 V, VGS = ± 8 V VDS = 12 V, VGS = 0 V VDS = 12 V, VGS = 0 V, TJ = 55 °C VDS ≤ 5 V, VGS = 4.5 V VGS = 4.5 V, ID = 10.8 A VGS = 2.5 V, ID = 10.2 A VGS = 1.8 V, ID = 3 A VDS = 6 V, ID = 10.8 A 20 0.0165 0.0185 0.0220 38 0.0198 0.0222 0.0264 S Ω 0.4 12 11 - 2.9 1.0 ± 100 1 10 V mV/°C V nA µA A Symbol Test Conditions Min. Typ. Max. Unit Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. c. Package limited Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 2 Document Number: 65361 S09-1924-Rev. A, 28-Sep-09 New Product SiA406DJ Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 20 VGS = 5 V thru 1.5 V 4 I D - Drain Current (A) I D - Drain Current (A) 15 5 3 10 2 TC = 25 °C 1 TC = 125 °C 5 VGS = 1 V 0 0.0 0.5 1.0 1.5 2.0 TC = - 55 °C 0 0.0 0.3 0.6 0.9 1.2 1.5 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics 0.025 2000 Transfer Characteristics RDS(on) - On-Resistance (Ω) 0.023 1500 VGS = 1.8 V 0.021 C - Capacitance (pF) Ciss 1000 Coss 500 0.019 VGS = 2.5 V 0.017 VGS = 4.5 V 0.015 0 5 10 ID - Drain Current (A) 15 20 Crss 0 0 3 6 9 12 VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current and Gate Voltage 5 ID = 10.8 A 4 VDS = 6 V 3 VDS = 3 V 2 VDS = 9.6 V R DS(on) - On-Resistance 1.4 1.6 Capacitance VGS - Gate-to-Source Voltage (V) VGS = 2.5 V; ID = 10.2 A (Normalized) 1.2 VGS = 4.5 V; ID = 10.8 A 1.0 1 0.8 0 0 3 6 9 12 15 18 0.6 - 50 - 25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) TJ - Junction Temperature (°C) Gate Charge On-Resistance vs. Junction Temperature Document Number: 65361 S09-1924-Rev. A, 28-Sep-09 www.vishay.com 3 New Product SiA406DJ Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 0.040 ID = 10.8 A R DS(on) - On-Resistance (Ω) 0.034 I S - Source Current (A) 10 0.028 TJ = 125 °C 0.022 TJ = 150 °C 1 TJ = 25 °C 0.016 TJ = 25 °C 0.1 0.0 0.010 0.2 0.4 0.6 0.8 1.0 0 2 4 6 8 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Soure-Drain Diode Forward Voltage 0.8 30 On-Resistance vs. Gate-to-Source Voltage 0.7 ID = 250 µA 0.6 VGS(th) (V) Power (W) 25 20 0.5 15 0.4 10 0.3 5 0.2 - 50 - 25 0 25 50 75 100 125 150 0 0.001 0.01 0.1 1 Time (s) 10 100 1000 TJ - Temperature (°C) Threshold Voltage 100 Limited by RDS(on)* Single Pulse Power, Junction-to-Ambient 100 µs 10 I D - Drain Current (A) 1 ms 10 ms 1 100 ms 1 s, 10 s 0.1 TA = 25 °C Single Pulse BVDSS Limited 0.01 0.1 DC 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient www.vishay.com 4 Document Number: 65361 S09-1924-Rev. A, 28-Sep-09 New Product SiA406DJ Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 28 I D - Drain Current (A) 21 14 7 Package Limited 0 0 25 50 75 100 125 150 TC - Case Temperature (°C) Current Derating* 25 2.0 20 1.5 Power (W) 15 Power (W) 0 25 50 75 100 125 150 1.0 10 0.5 5 0 0.0 0 25 50 75 100 125 150 TC - Case Temperature (°C) TA - Ambient Temperature (°C) Power, Junction-to-Case Power, Junction-to-Ambient * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Document Number: 65361 S09-1924-Rev. A, 28-Sep-09 www.vishay.com 5 New Product SiA406DJ Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 Notes: 0.1 0.1 0.05 PDM t1 t2 1. Duty Cycle, D = t1 t2 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 Square Wave Pulse Duration (s) 10 2. Per Unit Base = RthJA = 80 C/W 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted 100 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.05 0.02 Single Pulse 10-3 Square Wave Pulse Duration (s) 10-2 10-1 0.1 10-4 Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65361. www.vishay.com 6 Document Number: 65361 S09-1924-Rev. A, 28-Sep-09 Package Information Vishay Siliconix PowerPAK® SC70-6L PIN1 e PIN2 b PIN3 L PIN1 e PIN2 b PIN3 L K E1 D1 D1 K PIN6 K2 PIN5 K1 PIN4 K2 BACKSIDE VIEW OF DUAL E2 K4 E1 D1 PIN6 K3 PIN5 K1 PIN4 K2 BACKSIDE VIEW OF SINGLE K E3 D2 D A Notes: 1. All dimensions are in millimeters 2. Package outline exclusive of mold flash and metal burr 3. Package outline inclusive of plating E z Z DETAIL Z SINGLE PAD DIM Min A A1 b C D D1 D2 E E1 E2 E3 e K K1 K2 K3 K4 L T ECN: C-07431 − Rev. C, 06-Aug-07 DWG: 5934 Document Number: 73001 06-Aug-07 0.175 0.675 0 0.23 0.15 1.98 0.85 0.135 1.98 1.40 0.345 0.425 MILLIMETERS Nom 0.75 0.30 0.20 2.05 0.95 0.235 2.05 1.50 0.395 0.475 0.65 BSC 0.275 TYP 0.400 TYP 0.240 TYP 0.225 TYP 0.355 TYP 0.275 0.375 0.007 Max 0.80 0.05 0.38 0.25 2.15 1.05 0.335 2.15 1.60 0.445 0.525 Min 0.027 0 0.009 0.006 0.078 0.033 0.005 0.078 0.055 0.014 0.017 INCHES Nom 0.030 0.012 0.008 0.081 0.037 0.009 0.081 0.059 0.016 0.019 0.026 BSC 0.011 TYP 0.016 TYP 0.009 TYP 0.009 TYP 0.014 TYP 0.011 0.015 0.175 0.05 0.275 0.10 Max 0.032 0.002 0.015 0.010 0.085 0.041 0.013 0.085 0.063 0.018 0.021 0.65 BSC 0.275 TYP 0.320 TYP 0.252 TYP 1.98 0.85 2.05 0.95 Min 0.675 0 0.23 0.15 1.98 0.513 MILLIMETERS Nom 0.75 0.30 0.20 2.05 0.613 A1 C DUAL PAD INCHES Max 0.80 0.05 0.38 0.25 2.15 0.713 2.15 1.05 Min 0.027 0 0.009 0.006 0.078 0.020 0.078 0.033 Nom 0.030 0.012 0.008 0.081 0.024 0.081 0.037 Max 0.032 0.002 0.015 0.010 0.085 0.028 0.085 0.041 E1 0.026 BSC 0.011 TYP 0.013 TYP 0.010 TYP 0.375 0.15 0.007 0.002 0.011 0.004 0.015 0.006 www.vishay.com 1 Application Note 826 Vishay Siliconix RECOMMENDED PAD LAYOUT FOR PowerPAK® SC70-6L Single 0.300 (0.012) 0.650 (0.026) 0.350 (0.014) 0.275 (0.011) 0.550 (0.022) 0.475 (0.019) 2.200 (0.087) 1.500 (0.059) 0.870 (0.034) 0.235 (0.009) 0.355 (0.014) 0.350 (0.014) 1 0.650 (0.026) 0.950 (0.037) 0.300 (0.012) Dimensions in mm/(Inches) Return to Index APPLICATION NOTE Document Number: 70486 Revision: 21-Jan-08 www.vishay.com 11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1