SIB455EDK-T1-GE3

New Product SiB455EDK Vishay Siliconix P-Channel 12-V (D-S) MOSFET PRODUCT SUMMARY VDS (V) RDS(on) (Ω) 0.027 at VGS = - 4.5 V - 12 0.039 at VGS = - 2.5 V 0.069 at VGS = - 1.8 V 0.130 at VGS = - 1.5 V ID (A) - 9a - 9a - 9a -3 11.3 nC Qg (Typ.) FEATURES • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • New Thermally Enhanced PowerPAK® SC-75 Package - Small Footprint Area - Low On-Resistance • Typical ESD Performance 1500 V • 100 % Rg Tested • Compliant to RoHS Directive 2002/95/EC PowerPAK SC-75-6L-Single APPLICATIONS 1 D 2 D 3 6 D 5 D S 4 S 1.60 mm G Part # code BKX XXX Lot Traceability and Date code G R S • Load Switch, PA Switch and Battery Switch for Portable Devices Marking Code 1.60 mm D Ordering Information: SiB455EDK-T1-GE3 (Lead (Pb)-free and Halogen-free) P-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Drain-Source Voltage Gate-Source Voltage TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C TC = 25 °C TA = 25 °C TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C d, e Symbol VDS VGS ID IDM IS Limit - 12 ± 10 - 9a - 9a - 7.8b, c - 6.2b, c - 25 - 9a - 2b, c 13 8.4 2.4b, c 1.6b, c - 55 to 150 260 Unit V Continuous Drain Current (TJ = 150 °C) Pulsed Drain Current Continuous Source-Drain Diode Current A Maximum Power Dissipation PD TJ, Tstg W Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) °C THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambientb, f Maximum Junction-to-Case (Drain) t≤5s Steady State Symbol RthJA RthJC Typical 41 7.5 Maximum 51 9.5 Unit °C/W Notes: a. Package limited. b. Surface Mounted on 1" x 1" FR4 board. c. t = 5 s. d. See Solder Profile (www.vishay.com/ppg?73257). The PowerPAK SC-75 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components. f. Maximum under Steady State conditions is 105 °C/W. Document Number: 65599 S09-2682-Rev. A, 14-Dec-09 www.vishay.com 1 New Product SiB455EDK Vishay Siliconix SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta VDS ΔVDS/TJ ΔVGS(th)/TJ VGS(th) IGSS IDSS ID(on) VGS = 0 V, ID = - 250 µA ID = - 250 µA VDS = VGS, ID = - 250 µA VDS = 0 V, VGS = ± 8 V VDS = 0 V, VGS = ± 4.5 V VDS = - 12 V, VGS = 0 V VDS = - 12 V, VGS = 0 V, TJ = 55 °C VDS ≤ - 5 V, VGS = - 4.5 V VGS = - 4.5 V, ID = - 5.6 A Drain-Source On-State Resistancea RDS(on) VGS = - 2.5 V, ID = - 4.7 A VGS = - 1.8 V, ID = - 3.5 A VGS = - 1.5 V, ID = - 0.5 A Forward Transconductance Dynamicb Total Gate Charge Gate-Source Charge Gate-Drain Charge Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulse Diode Forward Current Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Reverse Recovery Fall Time Reverse Recovery Rise Time IS ISM VSD trr Qrr ta tb IF = - 6.5 A, dI/dt = 100 A/µs, TJ = 25 °C IS = - 6.5 A, VGS = 0 V - 0.85 30 12 12 18 TC = 25 °C -9 - 25 - 1.2 60 25 A V ns nC ns Qg Qgs Qgd Rg td(on) tr td(off) tf td(on) tr td(off) tf VDD = - 6 V, RL = 0.9 Ω ID ≅ - 6.5 A, VGEN = - 8 V, Rg = 1 Ω VDD = - 6 V, RL = 0.9 Ω ID ≅ - 6.5 A, VGEN = - 4.5 V, Rg = 1 Ω f = 1 MHz 0.28 VDS = - 6 V, VGS = - 8 V, ID = - 8 A VDS = - 6 V, VGS = - 4.5 V, ID = - 8 A 20 11.3 0.9 4.3 1.4 0.4 1.4 3.7 3.2 0.18 0.7 5.5 3.2 2.8 0.6 2.1 5.6 4.8 0.27 1.1 8.30 4.8 µs kΩ 30 17 nC a Symbol Test Conditions Min. - 12 Typ. Max. Unit V - 2.2 2.7 - 0.4 -1 ± 10 ±1 -1 - 10 - 15 0.022 0.032 0.056 0.075 18 0.027 0.039 0.069 0.13 mV/°C V µA A Ω gfs VDS = - 6 V, ID = - 5.6 A S Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 2 Document Number: 65599 S09-2682-Rev. A, 14-Dec-09 New Product SiB455EDK Vishay Siliconix TYPICAL CHARACTERISTICS 1.0 25 °C, unless otherwise noted 10-2 10-3 0.8 I GSS - Gate Current (mA) TJ = 25 °C 0.6 I GSS - Gate Current (A) 10-4 10-5 10-6 10-7 10-8 10-9 TJ = 150 °C TJ = 25 °C 0.4 0.2 0.0 0 3 6 9 12 15 10-10 0 3 6 9 12 15 VGS - Gate-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Gate Current vs. Gate-Source Voltage 25 VGS = 5 V thru 2.5 V 8 VGS = 2 V 15 I D - Drain Current (A) 10 Gate Current vs. Gate-Source Voltage 20 I D - Drain Current (A) 6 10 VGS = 1.5 V 5 VGS = 1 V 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 4 TC = 25 °C 2 TC = 125 °C TC = - 55 °C 0 0.0 0.5 1.0 1.5 2.0 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics 0.16 8 Transfer Characteristics ID = 8 A 0.12 VGS - Gate-to-Source Voltage (V) R DS(on) - On-Resistance (Ω) 6 VDS = 6 V 4 VDS = 3 V VDS = 9.6 V 0.08 VGS = 1.5 V 0.04 VGS = 1.8 V VGS = 2.5 V 2 0.00 0 5 10 15 VGS = 4.5 V 20 25 0 0 5 10 15 20 25 ID - Drain Current (A) Qg - Total Gate Charge (nC) On-Resistance vs. Drain Current Gate Charge Document Number: 65599 S09-2682-Rev. A, 14-Dec-09 www.vishay.com 3 New Product SiB455EDK Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1.4 1.3 R DS(on) - On-Resistance 1.2 (Normalized) 1.1 1.0 VGS = 1.5 V; ID = 1.5 A 0.9 0.8 0.7 - 50 0.1 0.0 VGS = 4.5 V, 2.5 V; ID = 5.6 A 100 I S - Source Current (A) VGS = 1.8 V; ID = 1.5 A TJ = 150 °C 10 TJ = 25 °C 1 - 25 0 25 50 75 100 125 150 0.2 0.4 0.6 0.8 1.0 1.2 TJ - Junction Temperature (°C) VSD - Source-to-Drain Voltage (V) On-Resistance vs. Junction Temperature 0.10 20 Soure-Drain Diode Forward Voltage R DS(on) - On-Resistance (Ω) 0.08 15 Power (W) 0.06 ID = 1.5 A; TJ = 125 °C ID = 5.6 A; TJ = 125 °C 10 0.04 ID = 5.6 A; TJ = 25 °C 0.02 ID = 1.5 A; TJ = 25 °C 0.00 0 1 2 3 4 5 5 0 0.001 0.01 0.1 1 Pulse (s) 10 100 1000 VGS - Gate-to-Source Voltage (V) On-Resistance vs. Gate-to-Source Voltage 0.8 100 Single Pulse Power, Junction-to-Ambient Limited by RDS(on)* 0.7 I D - Drain Current (A) ID = 250 µA 0.6 VGS(th) (V) 10 100 µs 1 ms 1 10 ms 100 ms 1 s, 10 s 0.1 0.3 TA = 25 °C Single Pulse BVDSS Limited 0.2 - 50 - 25 0 25 50 75 100 125 150 0.01 0.1 1 10 100 DC 0.5 0.4 TJ - Temperature (°C) Threshold Voltage VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient www.vishay.com 4 Document Number: 65599 S09-2682-Rev. A, 14-Dec-09 New Product SiB455EDK Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 20 15 16 I D - Drain Current (A) 12 12 Package Limited 8 Power (W) 9 6 4 3 0 0 25 50 75 100 125 150 0 25 50 75 100 125 150 TC - Case Temperature (°C) TC - Case Temperature (°C) Current Derating* Power Derating * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Document Number: 65599 S09-2682-Rev. A, 14-Dec-09 www.vishay.com 5 New Product SiB455EDK Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.1 0.05 0.02 Notes: PDM t1 t2 1. Duty Cycle, D = t1 t2 Single Pulse 2. Per Unit Base = R thJA = 105 °C/W 3. T JM - TA = PDMZthJA(t) 4. Surface Mounted 0.01 10-4 10-3 10-2 10-1 1 Square Wave Pulse Duration (s) 10 100 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.05 0.02 Single Pulse 0.1 10-4 10-3 Square Wave Pulse Duration (s) 10-2 10-1 Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65599. www.vishay.com 6 Document Number: 65599 S09-2682-Rev. A, 14-Dec-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1