SIE822DF-T1-GE3

SiE822DF Vishay Siliconix N-Channel 20-V (D-S) MOSFET PRODUCT SUMMARY ID (A)a VDS (V) 20 RDS(on) (Ω) 0.0034 at VGS = 10 V 0.0055 at VGS = 4.5 V Silicon Limit 138 108 Package Qg (Typ.) Limit 50 24 nC 50 FEATURES • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • Ultra Low Thermal Resistance Using TopExposed PolarPAK® Package for DoubleSided Cooling • Leadframe-Based New Encapsulated Package - Die Not Exposed - Same Layout Regardless of Die Size • Low Qgd/Qgs Ratio Helps Prevent Shoot-Through • 100 % Rg and UIS Tested • Compliant to RoHS directive 2002/95/EC Package Drawing www.vishay.com/doc?73398 PolarPAK 10 D 9 G 8 S 7 S 6 D 6 7 8 9 10 APPLICATIONS D D S G D • VRM • DC-DC Conversion • Synchronous Rectification G D D 1 G 2 S 3 S 4 D 5 5 4 3 2 1 S N-Channel MOSFET For Related Documents www.vishay.com/ppg?74451 Top View Bottom View Top surface is connected to pins 1, 5, 6, and 10 Ordering Information: SiE822DF-T1-E3 (Lead (Pb)-free) SiE822DF-T1-GE3 (Lead (Pb)-free and Halogen-free) ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Drain-Source Voltage Gate-Source Voltage TC = 25 °C Continuous Drain Current (TJ = 150 °C) TC = 70 °C TA = 25 °C TA = 70 °C TC = 25 °C TA = 25 °C L = 0.1 mH ID Symbol VDS VGS Limit 20 ± 20 138 (Silicon Limit) 50a (Package Limit) 50a 31b, c 24.8b, c 80 50a 4.3b, c 30 45 104 66 5.2b, c 3.3b, c - 55 to 150 260 Unit V A Pulsed Drain Current Continuous Source-Drain Diode Current Single Pulse Avalanche Current Avalanche Energy IDM IS IAS EAS mJ TC = 25 °C TC = 70 °C PD W Maximum Power Dissipation TA = 25 °C TA = 70 °C TJ, Tstg Operating Junction and Storage Temperature Range °C Soldering Recommendations (Peak Temperature)d, e Notes: a. Package limited is 50 A. b. Surface Mounted on 1" x 1" FR4 board. c. t = 10 s. d. See Solder Profile (www.vishay.com/doc?73257). The PolarPAK is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components. Document Number: 74451 S09-1338-Rev. B, 13-Jul-09 www.vishay.com 1 SiE822DF Vishay Siliconix THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient Maximum Junction-to-Case (Drain Top)a Steady State Maximum Junction-to-Case (Source)a, c Notes: a. Surface Mounted on 1" x 1" FR4 board. b. Maximum under Steady State conditions is 68 °C/W. c. Measured at source pin (on the side of the package). a, b t ≤ 10 s Symbol RthJA RthJC (Drain) RthJC (Source) Typical 20 1 2.8 Maximum 24 1.2 3.4 Unit °C/W SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductancea Dynamicb Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Currenta VDS ΔVDS/TJ ΔVGS(th)/TJ VGS(th) IGSS IDSS ID(on) RDS(on) gfs Ciss Coss Crss Qg Qgs Qgd Rg td(on) tr td(off) tf td(on) tr td(off) tf IS ISM VSD trr Qrr ta tb VGS = 0 V, ID = 250 µA ID = 250 µA VDS = VGS , ID = 250 µA VDS = 0 V, VGS = ± 20 V VDS = 20 V, VGS = 0 V VDS = 20 V, VGS = 0 V, TJ = 55 °C VDS ≥ 5 V, VGS = 10 V VGS = 10 V, ID = 18.3 A VGS = 4.5 V, ID = 14.5 A VDS = 15 V, ID = 18.3 A 1.5 20 24.1 - 7.1 2.3 V mV/°C 3.0 ± 100 1 10 0.0034 0.0055 V nA µA A 0.0028 0.0045 90 4200 1000 320 52 24 13 5 1.0 50 220 35 20 15 25 35 10 Ω S Symbol Test Conditions Min. Typ. Max. Unit 25 VDS = 10 V, VGS = 0 V, f = 1 MHz VDS = 10 V, VGS = 10 V, ID = 20 A VDS = 10 V, VGS = 4.5 V, ID = 20 A f = 1 MHz VDD = 10 V, RL = 1 Ω ID ≅ 10 A, VGEN = 4.5 V, Rg = 1 Ω pF 78 36 nC Ω VDD = 20 V, RL = 1 Ω ID ≅ 10 A, VGEN = 10 V, Rg = 1 Ω 1.5 75 330 55 30 25 40 55 15 50 80 1.2 60 60 ns TC = 25 °C IS = 1 0 A IF = 10 A, dI/dt = 100 A/µs, TJ = 25 °C 0.8 40 36 19 21 Pulse Diode Forward Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Reverse Recovery Fall Time Reverse Recovery Rise Time Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 % b. Guaranteed by design, not subject to production testing. A V ns nC ns Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 2 Document Number: 74451 S09-1338-Rev. B, 13-Jul-09 SiE822DF Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 80 VGS = 10 V thru 4 V 16 60 I D - Drain Current (A) I D - Drain Current (A) 12 TC = 25 °C 8 20 TC = 125 °C 40 20 VGS = 3 V 0 0.0 4 TC = - 55 °C 2.0 2.5 3.0 3.5 4.0 0.4 0.8 1.2 1.6 2.0 0 1.5 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics 0.006 0.0055 R DS(on) - On-Resistance (m ) 0.005 0.0045 0.004 0.0035 0.003 0.0025 0.002 0 20 40 ID - Drain Current (A) 60 80 0 0 Crss VGS = 10 V VGS = 4.5 V 3600 C - Capacitance (pF) 4800 Transfer Characteristics Ciss 2400 Coss 1200 5 10 15 20 VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current 10 ID = 20 A VGS - Gate-to-Source Voltage (V) 8 VDS = 10 V VDS = 16 V R DS(on) - On-Resistance 1.4 1.6 ID = 18.3 A Capacitance VGS = 10 V, 4.5 V (Normalized) 1.2 6 4 1.0 2 0.8 0 0 10 20 30 40 50 60 0.6 - 50 - 25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) TJ - Junction Temperature (°C) Gate Charge On-Resistance vs. Junction Temperature Document Number: 74451 S09-1338-Rev. B, 13-Jul-09 www.vishay.com 3 SiE822DF Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 R DS(on) - Drain-to-Source On-Resistance ( ) 0.008 ID = 18.3 A 0.007 I S - Source Current (A) 0.006 TJ = 150 °C 10 TJ = 25 °C 0.005 TA = 125 °C 0.004 TA = 25 °C 0.003 1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 VSD - Source-to-Drain Voltage (V) 0.002 2 4 6 8 10 VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage 3.0 2.8 2.6 2.4 VGS(th) (V) 2.2 2.0 1.8 1.6 1.4 1.2 - 50 0 0.01 10 ID = 250 µA Power (W) 30 40 50 On-Resistance vs. Gate-to-Source Voltage 20 - 25 0 25 50 75 100 125 150 0.1 1 Time (s) 10 100 1000 TJ - Temperature (°C) Threshold Voltage 100 Limited by RDS(on)* Single Pulse Power, Junction-to-Ambient 1 ms I D - Drain Current (A) 10 10 ms 100 ms 1 1s TA = 25 C Single Pulse 0.1 BVDSS Limited 0.01 0.01 * VGS 1 0.1 10 100 VDS - Drain-to-Source Voltage (V) minimum VGS at which RDS(on) is specified 10 s DC Safe Operating Area, Junction-to-Ambient www.vishay.com 4 Document Number: 74451 S09-1338-Rev. B, 13-Jul-09 SiE822DF Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 160 140 Power Dissipation (W) 120 I D - Drain Current (A) 100 80 60 40 20 0 0 25 50 75 100 125 150 20 Package Limited 120 100 80 60 40 0 25 50 75 100 125 150 TC - Case Temperature (°C) TC - Case Temperature (°C) Current Derating* Power Derating, Junction-to-Case * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Document Number: 74451 S09-1338-Rev. B, 13-Jul-09 www.vishay.com 5 SiE822DF Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 2 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 Notes: 0.1 0.1 0.05 P DM t1 t2 1. Duty Cycle, D = t1 t2 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 2. Per Unit Base = RthJA = 55 °C/W 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted 10 100 600 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 2 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 Square Wave Pulse Duration (s) 10-1 1 Normalized Thermal Transient Impedance, Junction-to-Case (Drain Top) 2 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.1 0.05 0.02 0.01 Single Pulse 10-4 10-3 10-2 Square Wave Pulse Duration (s) 10-1 1 Normalized Thermal Transient Impedance, Junction-to-Source Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?74451. www.vishay.com 6 Document Number: 74451 S09-1338-Rev. B, 13-Jul-09 Package Information Vishay Siliconix PolarPAKt M4 10 T5 D (Option S) M4 9 G 8 S 7 S 6 D Q Product datasheet/information page contain links to applicable package drawing. T2 T3 E1 T4 T1 VIEW A M3 T3 M2 M3 M1 T5 D 1 G 2 S 3 (Top View) S 4 D 5 A Q c 6 Q Q D H1 b1 H4 7 S b3 E 8 S 9 G H3 b2 H2 10 D b1 H1 Z P1 D1 D K4 A1 K4 P1 b4 b4 DETAIL Z b5 D 5 b5 S 4 VIEW A (Bottom View) S 3 b5 G 2 D 1 Document Number: 73398 10-Jun-05 www.vishay.com K1 1 Package Information Vishay Siliconix MILLIMETERS Dim A A1 b1 b2 b3 b4 b5 c D D1 E E1 H1 H2 H3 H4 K1 K4 M1 M2 M3 M4 P1 T1 T2 T3 T4 T5 Q Min 0.75 0.00 0.48 0.41 2.19 0.89 0.23 0.20 6.00 5.74 5.01 4.75 0.23 0.45 0.31 0.45 4.22 0.24 4.30 3.43 0.22 0.05 0.15 3.48 0.56 1.20 3.90 0 0_ INCHES Min 0.030 0.000 0.019 0.016 0.086 0.035 0.009 0.008 0.236 0.226 0.197 0.187 0.009 0.020 0.012 0.020 0.166 0.009 0.169 0.135 0.009 0.002 0.006 0.137 0.22 0.051 0.154 0.000 0_ Nom 0.80 − 0.58 0.51 2.29 1.04 0.33 0.25 6.15 5.89 5.16 4.90 − − 0.41 − 4.37 − 4.50 3.58 − − 0.20 3.64 0.76 − − 0.18 10_ Max 0.85 0.05 0.68 0.61 2.39 1.19 0.43 0.30 6.30 6.04 5.31 5.05 − 0.56 0.51 0.56 4.52 − 4.70 3.73 − − 0.25 4.10 0.95 − − 0.36 12_ Nom 0.031 − 0.023 0.020 0.090 0.041 0.013 0.010 0.242 0.232 0.203 0.193 − − 0.016 − 0.172 − 0.177 0.141 − − 0.008 0.143 0.030 − − 0.007 10_ Max 0.033 0.002 0.027 0.024 0.094 0.047 0.017 0.012 0.248 0.238 0.209 0.199 − 0.022 0.020 0.022 0.178 − 0.185 0.147 − − 0.010 0.150 0.037 − − 0.014 12_ ECN: S−51049—Rev. B, 13-Jun-05 DWG: 5947 Note: Millimeters govern over inches www.vishay.com 2 Document Number: 73398 10-Jun-05 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR PolarPAK® Option L and S 7.300 (0.287) 0.510 (0.020) 0.410 (0.016) 0.510 (0.020) 0.955 (0.038) 0.955 (0.038) 0.895 (0.035) 6.310 (0.248) 4.520 (0.178) + 0.895 (0.035) 0.580 (0.023) 0.510 (0.020) 2.290 (0.090) 0.580 (0.023) Recommended Minimum for PolarPAK Option L and S Dimensions in mm/(Inches) No External Traces within Broken Lines Dot indicates Gate Pin (Part Marking) APPLICATION NOTE Return to Index www.vishay.com 6 Document Number: 73491 Revision: 21-Jan-08 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1