New Product
SiR428DP
Vishay Siliconix
N-Channel 30-V (D-S) MOSFET
PRODUCT SUMMARY
VDS (V) 30 RDS(on) (Ω) 0.0075 at VGS = 10 V 0.0095 at VGS = 4.5 V ID (A)a, g 30g 30g Qg (Typ.) 9.5 nC
FEATURES
• Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • 100 % Rg Tested • 100 % UIS Tested • Compliant to RoHS Directive 2002/95/EC
PowerPAK® SO-8
APPLICATIONS
6.15 mm
S 1 2 3 4 D 8 7 6 5 D D D S S G
5.15 mm
• Synchronous Rectification • VRM • Server
D
G
Bottom View Ordering Information: SIR428DP-T1-GE3 (Lead (Pb)-free and Halogen-free)
S N-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
Parameter Drain-Source Voltage Gate-Source Voltage TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C TC = 25 °C TA = 25 °C L = 0.1 mH TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C Symbol VDS VGS ID Limit 30 ± 20 30g 30g 17.4b, c 13.8b, c 60 30g 3.7b, c 20 20 22.7 14.5 4.1b, c 2.6b, c - 55 to 150 260 Unit V
Continuous Drain Current (TJ = 150 °C)
Pulsed Drain Current Continuous Source-Drain Diode Current Single Pulse Avalanche Current Single Pulse Avalanche Energy
IDM IS IAS EAS PD
A
mJ
Maximum Power Dissipation
W
Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature)d, e
TJ, Tstg
°C
THERMAL RESISTANCE RATINGS
Parameter Maximum Junction-to-Ambientb, f Maximum Junction-to-Case (Drain) t ≤ 10 s Steady State Symbol RthJA RthJC Typical 22 4.5 Maximum 30 5.5 Unit °C/W
Notes: a. Based on TC = 25 °C. b. Surface Mounted on 1" x 1" FR4 board. c. t = 10 s. d. See Solder Profile (www.vishay.com/ppg?73257). The PowerPAK SO-8 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components. f. Maximum under Steady State conditions is 70 °C/W. g. Package limited. Document Number: 64987 S09-1093-Rev. A, 15-Jun-09 www.vishay.com 1
New Product
SiR428DP
Vishay Siliconix
SPECIFICATIONS TJ = 25 °C, unless otherwise noted
Parameter Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductancea Dynamicb Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulse Diode Forward Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Reverse Recovery Fall Time Reverse Recovery Rise Time Currenta IS ISM VSD trr Qrr ta tb IF = 10 A, dI/dt = 100 A/µs, TJ = 25 °C IS = 3 A 0.75 22 15.5 14 8 TC = 25 °C 30 60 1.1 40 28 A V ns nC ns Ciss Coss Crss Qg Qgs Qgd Rg td(on) tr td(off) tf td(on) tr td(off) tf VDD = 10 V, RL = 1 Ω ID ≅ 10 A, VGEN = 4.5 V, Rg = 1 Ω VDD = 15 V, RL = 1.5 Ω ID ≅ 10 A, VGEN = 10 V, Rg = 1 Ω f = 1 MHz 0.2 VDS = 15 V, VGS = 10 V, ID = 10 A VDS = 15 V, VGS = 4.5 V, ID = 10 A VDS = 15 V, VGS = 0 V, f = 1 MHz 1117 274 80 21 9.5 2.8 2.8 0.5 8 10 17 8 16 11 18 9 1.0 16 20 34 16 32 22 36 18 ns Ω 32 14.5 nC pF VDS ΔVDS/TJ ΔVGS(th)/TJ VGS(th) IGSS IDSS ID(on) RDS(on) gfs VGS = 0 V, ID = 250 µA ID = 250 µA VDS = VGS, ID = 250 µA VDS = 0 V, VGS = ± 20 V VDS = 30 V, VGS = 0 V VDS = 30 V, VGS = 0 V, TJ = 55 °C VDS ≥ 5 V, VGS = 10 V VGS = 10 V, ID = 10 A VGS = 4.5 V, ID = 10 A VDS = 10 V, ID = 10 A 30 0.0061 0.0077 46 0.0075 0.0095 1.2 30 27 - 4.4 2.5 ± 100 1 10 V mV/°C V nA µA A Ω S Symbol Test Conditions Min. Typ. Max. Unit
Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
www.vishay.com 2
Document Number: 64987 S09-1093-Rev. A, 15-Jun-09
New Product
SiR428DP
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
60 VGS = 10 V thru 4 V 48 I D - Drain Current (A) I D - Drain Current (A) 8 10
36
6 TC = 125 °C 4 TC = 25 °C 2 TC = -- 55 °C
24
VGS = 3 V
12
0 0.0
0 0.5 1.0 1.5 2.0 2.5 0 1 2 3 4 5
VDS - Drain-to-Source Voltage (V)
VGS - Gate-to-Source Voltage (V)
Output Characteristics
0.010 1500
Transfer Characteristics
R DS(on) - On-Resistance ( W )
0.009 C - Capacitance (pF) VGS = 4.5 V 0.008
1200
Ciss
900
0.007 VGS = 10 V
600 Coss 300 Crss
0.006
0.005 0 12 24 36 48 60
0 0 6 12 18 24 30
ID - Drain Current (A)
VDS - Drain-to-Source Voltage (V)
On-Resistance vs. Drain Current and Gate Voltage
10 ID = 10 A VGS - Gate-to-Source Voltage (V) 8 VDS = 10 V 6 VDS = 15 V 4 VDS = 20 V RDS(on) - On-Resistance (Normalized) 1.5 1.7 ID = 10 A
Capacitance
VGS = 4.5 V VGS = 10 V
1.3
1.1
2
0.9
0 0.0
4.4
8.8
13.2
17.6
22.0
0.7 - 50
- 25
0
25
50
75
100
125
150
Qg - Total Gate Charge (nC)
TJ - Junction Temperature (°C)
Gate Charge
On-Resistance vs. Junction Temperature
Document Number: 64987 S09-1093-Rev. A, 15-Jun-09
www.vishay.com 3
New Product
SiR428DP
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
100 TJ = 150 °C RDS(on) - On-Resistance (Ω) 10 I S - Source Current (A) TJ = 25 °C 1 0.024 0.030
ID = 10 A
0.018
0.1
0.012
TJ = 125 °C
0.01
0.006 TJ = 25 °C 0.000
0.001 0.0
0.2
0.4
0.6
0.8
1.0
1.2
0
1
2
3
4
5
6
7
8
9
10
VSD - Source-to-Drain Voltage (V)
VGS - Gate-to-Source Voltage (V)
Source-Drain Diode Forward Voltage
0.5 200
On-Resistance vs. Gate-to-Source Voltage
0.2 V GS(th) Variance (V)
160
Power (W)
- 0.1
ID = 5 mA
120
- 0.4 ID = 250 µA - 0.7
80
40
- 1.0 - 50
0 - 25 0 25 50 75 100 125 150 0.001 0.01 0.1 Time (s) 1 10 TJ - Temperature (°C)
Threshold Voltage
100 Limited by RDS(on)*
Single Pulse Power, Junction-to-Ambient
1 ms 10 ID - Drain Current (A)
10 ms 1 100 ms 1s 0.1 TA = 25 °C Single Pulse 0.01 0.01 0.1 1 BVDSS Limited 10 s DC
10
100
VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified
Safe Operating Area, Junction-to-Ambient www.vishay.com 4 Document Number: 64987 S09-1093-Rev. A, 15-Jun-09
New Product
SiR428DP
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
45
36 ID - Drain Current (A)
Package Limited
27
18
9
0 0 25 50 75 100 125 150
TC - Case Temperature (°C)
Current Derating*
28.0 2.5
22.4
2.0
Power (W)
Power (W)
16.8
1.5
11.2
1.0
5.6
0.5
0.0 0 25 50 75 100 125 150
0.0 0 25 50 75 100 125 150
TC - Case Temperature (°C)
TA - Ambient Temperature (°C)
Power, Junction-to-Case
Power, Junction-to-Ambient
* The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit.
Document Number: 64987 S09-1093-Rev. A, 15-Jun-09
www.vishay.com 5
New Product
SiR428DP
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance
0.2 0.1 0.1
PDM Notes:
0.05
t1 t2 1. Duty Cycle, D = t1 t2
0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 10
2. Per Unit Base = RthJA = 70 °C/W 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted
100
1000
Normalized Thermal Transient Impedance, Junction-to-Ambient
1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance
0.2 0.1 0.1 0.05 0.02
Single Pulse
0.01 10 -4
10 -3
10 -2 10 -1 Square Wave Pulse Duration (s)
1
10
Normalized Thermal Transient Impedance, Junction-to-Case
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?64987.
www.vishay.com 6
Document Number: 64987 S09-1093-Rev. A, 15-Jun-09
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1
