SM5S17

SM5S10 thru SM5S36A Vishay General Semiconductor Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Patented PAR® construction • Available in uni-directional polarity only • Low leakage current • Low forward voltage drop • High surge capability • Meets ISO7637-2 surge spec (varied by test condition) • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. MECHANICAL DATA Case: DO-218AB Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Heatsink is anode * nted e Pat *Patent #'s: 4,980,315 5,166,769 5,278,095 DO-218AB PRIMARY CHARACTERISTICS VWM PPPM (10 x 1000 µs) PPPM (10 x 10 000 µs) PD IFSM TJ max. 10 V to 36 V 3600 W 2800 W 5W 500 A 175 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with 10/1000 µs waveform with 10/10000 µs waveform waveform (1) SYMBOL PPPM PD IPPM IFSM TJ, TSTG VALUE 3600 2800 5.0 See next table 500 - 55 to + 175 UNIT W W A A °C Power dissipation on infinite heatsink at TC = 25 °C (Fig. 1) Peak pulse current with 10/1000 µs Peak forward surge current 8.3 ms single half sine-wave Operating junction and storage temperature range Note: (1) Non-repetitive current pulse at TA = 25 °C Document Number: 88382 Revision: 20-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 SM5S10 thru SM5S36A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE BREAKDOWN VOLTAGE VBR (V) MIN. SM5S10 SM5S10A SM5S11 SM5S11A SM5S12 SM5S12A SM5S13 SM5S13A SM5S14 SM5S14A SM5S15 SM5S15A SM5S16 SM5S16A SM5S17 SM5S17A SM5S18 SM5S18A SM5S20 SM5S20A SM5S22 SM5S22A SM5S24 SM5S24A SM5S26 SM5S26A SM5S28 SM5S28A SM5S30 SM5S30A SM5S33 SM5S33A SM5S36 SM5S36A Note: For all types maximum VF = 2.0 V at IF = 100 A measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 MAX. 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 TEST CURRENT IT (mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 MAXIMUM STAND-OFF REVERSE VOLTAGE LEAKAGE AT VWM VWM (V) ID (µA) 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 MAXIMUM REVERSE LEAKAGE AT VWM TJ = 175 °C ID (µA) 250 250 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 MAX. PEAK PULSE CURRENT AT 10/1000 µs WAVEFORM (A) 191 212 179 198 164 181 151 167 140 155 134 148 125 138 118 130 112 123 101 111 91 101 84 93 77 86 72 79 67 74 61 68 56 62 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.1 45.4 53.5 48.4 59.0 53.3 64.3 58.1 www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88382 Revision: 20-Oct-08 SM5S10 thru SM5S36A Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance, junction to case SYMBOL RθJC VALUE 1.0 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N SM5S10AHE3/2D (1) Note: (1) Automotive grade AEC Q101 qualified UNIT WEIGHT (g) 2.505 PREFERRED PACKAGE CODE 2D BASE QUANTITY 750 DELIVERY MODE 13" diameter paper tape and reel, anode towards the sprocket hole RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 8.0 150 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM Input Peak Pulse Current (%) Power Dissipation (W) 6.0 tr = 10 µs 100 Peak Value IPPM 4.0 50 Half Value - IPP IPPM 2 2.0 0 0 50 100 150 200 0 0 td 10 20 30 40 Case Temperature (°C) t - Time (ms) Figure 1. Power Derating Curve Figure 3. Pulse Waveform 3000 10000 2000 1500 1000 500 0 25 50 75 100 125 150 175 Reverse Surge Power (W) 1000 10 100 2500 Load Dump Power (W) Case Temperature (°C) Pulse Width (ms) - ½ IPP Exponential Waveform Figure 2. Load Dump Power Characteristics (10 ms Exponential Waveform) Figure 4. Reverse Power Capability Document Number: 88382 Revision: 20-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 SM5S10 thru SM5S36A Vishay General Semiconductor 100 Transient Thermal Impedance (°C/W) 10 R θ JA R θ JC 1 0.1 0.01 0.01 0.1 1 10 100 t - Pulse Width (s) Figure 5. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-218AB 0.628(16.0) 0.592(15.0) 0.539(13.7) 0.524(13.3) 0.116(3.0) 0.093(2.4) Mounting Pad Layout 0.091(2.3) 0.067(1.7) 0.116(3.0) 0.093(2.4) 0.413(10.5) 0.342(8.7) 0.374(9.5) 0.327(8.3) 0.413(10.5) 0.374(9.5) 0.366(9.3) 0.343(8.7) 0.406(10.3) 0.382(9.7) Lead 1 0.197(5.0) 0.185(4.7) 0.138(3.5) 0.098(2.5) 0.366(9.3) 0.343(8.7) 0.606(15.4) 0.583(14.8) 0.150(3.8) 0.126(3.2) 0.016 (0.4) MIN. Lead 2/Metal Heatsink 0.028(0.7) 0.020(0.5) 0.098(2.5) 0.059(1.5) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88382 Revision: 20-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1