SMPC13A

New Product SMPC5.0A thru SMPC36A Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors eSMP ® Series A FEATURES • Very low profile - typical height of 1.1 mm • Ideal for automated placement • Uni-direction only • Excellent clamping capability 1 2 • Low incremental surge resistance • Very fast response time • Meets MSL level 1, per J-STD-020 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition TO-277A (SMPC) A Anode Cathode 1 Cathode 2 MECHANICAL DATA PRIMARY CHARACTERISTICS VWM PPPM PD IFSM TJ max. 5.0 V to 36 V 1500 W 6.5 W 200 A 150 °C Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. Sensitive equipment against transient overvoltages. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 μs waveform (fig. 3) Peak pulse current with a 10/1000 μs waveform (fig. 1) Peak forward surge current 8.3 ms single half sine-wave Power dissipation on infinite heatsink, TA = 50 °C Maximum instandaneous forward voltage at 100 A Operating junction and storage temperature range SYMBOL PPPM IPPM IFSM PD VF (3) TJ, TSTG (1)(2) (1) (2) VALUE 1500 See next table 200 6.5 3.5 - 55 to + 150 UNIT W A A W V °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) Pulse test: 300 µs pulse width, 1 % duty cyclet Document Number: 89116 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 19 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SMPC5.0A thru SMPC36A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE MARKING CODE GDE GDG GDK GDM GDP GDR GDT GDV GDX GDZ GEE GEG GEK GEM GEP GER GET GEV GEX GEZ GFE GFG GFK GFM GFP BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. SMPC5.0A SMPC6.0A SMPC6.5A SMPC7.0A SMPC7.5A SMPC8.0A SMPC8.5A SMPC9.0A SMPC10A SMPC11A SMPC12A SMPC13A SMPC14A SMPC15A SMPC16A SMPC17A SMPC18A SMPC20A SMPC22A SMPC24A SMPC26A SMPC28A SMPC30A SMPC33A SMPC36A 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 MAX. 7.07 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.0 34.4 36.8 40.6 44.2 TEST CURRENT IT (mA) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 MAXIMUM REVERSE LEAKAGE CURRENT IR AT VWM (μA) 1500 1000 500 200 100 50 20 5.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) 150 145.6 133.9 125.0 116.3 110.3 104.2 97.4 88.2 82.4 75.4 69.8 64.7 61.5 57.7 54.3 51.4 46.3 42.3 38.6 35.6 33.0 31.0 28.1 25.8 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10.0 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 DEVICE TYPE Notes (1) Pulse test: t  50 ms (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance, junction to ambient air Typical thermal resistance, junction to leads Notes Mounted on minimum recommended pad layout (2) Units mounted on infinite heatsink at T = 50 °C A (1) SYMBOL RJA (1) VALUE 125 UNIT °C/W RJL (2) 15 ORDERING INFORMATION (Example) PREFERRED P/N SMPC5.0A-M3/86A SMPC5.0A-M3/87A UNIT WEIGHT (g) 0.10 0.10 PREFERRED PACKAGE CODE 86A 87A BASE QUANTITY 1500 6500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel www.vishay.com 20 For technical questions within your region, please contact one of the following: Document Number: 89116 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SMPC5.0A thru SMPC36A Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) IPPM - Peak Pulse Current (%) IRSM 100 150 tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM PPPM - Peak Pulse Power (kW) Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 1 0.31 x 0.31" (8.0 x 8.0 mm) Copper Pad Areas 0.1 0.1 1 10 100 1000 10 000 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 td - Pulse Width (µs) Fig. 1 - Peak Pulse Power Rating Curve t - Time (ms) Fig. 3 - Pulse Waveform Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 10 000 75 CJ - Junction Capacitance (pF) VR measured at Zero Bias 1000 VR measured at Stand-off Voltage VWM 50 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 10 100 25 0 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Reverse Voltage (V) Fig. 4 - Typical Junction Capacitance Document Number: 89116 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 21 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SMPC5.0A thru SMPC36A Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) A 0.016 (0.40) 0.006 (0.15) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) K 2 K 1 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.047 (1.20) 0.039 (1.00) Mounting Pad Layout 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.268 (6.80) 0.186 (4.72) MIN. 0.049 (1.24) 0.037 (0.94) 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) Conform to JEDEC TO-277A 0.050 (1.27) MIN. 0.041 (1.04) 0.055 (1.40) MIN. www.vishay.com 22 For technical questions within your region, please contact one of the following: Document Number: 89116 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1