SS15P3S-M3-86A

New Product SS15P3S Vishay General Semiconductor SMD Photovoltaic Solar Cell Protection Schottky Rectifier FEATURES eSMP Series K ® • Very low profile - typical height of 1.1 mm • Ideal for automated placement • Guardring for overvoltage protection • Low forward voltage drop, low power losses 1 2 • High efficiency • Low thermal resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition TO-277A (SMPC) K Cathode Anode 1 Anode 2 MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM EAS V F a t IF = 1 5 A TJ max. 15 A 30 V 280 A 20 mJ 0.42 V 150 °C Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per TYPICAL APPLICATIONS For use in solar cell junction box as a bypass diode for protection, using DC forward current without reverse bias. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum DC forward current (fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at IAS = 2.0 A, TJ = 25 °C Operating junction and storage temperature range Junction temperature in DC forward current without reverse bias, t  1 h (3) SYMBOL SS15P3S 153S UNIT VRRM IF IFSM EAS TOP, TSTG TJ 30 15 (1) 4.5 (2) 280 20 - 55 to + 150  200 V A A mJ °C °C Notes (1) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x 100 mm fin heat sink (2) Free air, mounted on recommended copper pad area (3) Meets the requirements of IEC 61215 Ed. 2 bypass diode thermal test Document Number: 89128 Revision: 13-May-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 19 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SS15P3S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 7.5 A Instantaneous forward voltage IF = 15 A IF = 7.5 A IF = 15 A Reverse current Typical junction capacitance VR = 30 V 4.0 V, 1 MHz TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL TYP. 0.43 0.50 0.32 0.42 IR (2) CJ 150 59 930 MAX. 0.57 V 0.49 1000 120 μA mA pF UNIT Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RJA (1) VALUE 100 UNIT °C/W RJM (2) 3 Notes (1) Free air, mounted on recommended copper pad area. Thermal resistance R JA - junction to ambient. (2) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x 100 mm fin heat sink. Thermal resistance R JM - junction to mount. ORDERING INFORMATION (Example) PREFERRED P/N SS15P3S-M3/86A SS15P3S-M3/87A UNIT WEIGHT (g) 0.10 0.10 PREFERRED PACKAGE CODE 86A 87A BASE QUANTITY 1500 6500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Notes 18 16 TM = 100 °C (1) TA = 25 °C (2) TA = 25 °C (3) (1) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x DC Forward Current (A) 14 12 10 8 6 (5) 100 mm fin heat sink, TM measured at the terminal of cathode band (2) Mounted on 30 mm x 30 mm Al PCB (R JA = 20 °C/W) (3) Mounted on 30 mm x 30 mm x 2 copper pad areas FR4 PCB (RJA = 30 °C/W) TA = 25 °C (4) (4) Mounted on 25 mm x 25 mm x 2 copper pad areas FR4 PCB (RJA = 30 °C/W) (5) Free air, mounted on recommended copper pad area 4 2 0 0 25 50 75 100 125 150 (RJA = 100 °C/W) Ambient Temperature (°C) Fig. 1 - Maximum Current Derating Curve www.vishay.com 20 For technical questions within your region, please contact one of the following: Document Number: 89128 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 13-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SS15P3S Vishay General Semiconductor 9 8 1000 Instantaneous Reverse Current (mA) D = 0.8 D = 0.5 D = 0.3 D = 0.2 D = 1.0 100 TA = 150 °C Average Power Loss (W) 7 6 5 4 3 2 1 0 0 2 4 D = 0.1 10 TA = 125 °C 1 T 0.1 TA = 25 °C 0.01 D = tp/T 6 8 10 12 14 tp 16 18 0.001 10 20 30 40 50 60 70 80 90 100 Average Forward Current (A) Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Forward Power Loss Characteristics 100 Fig. 4 - Typical Reverse Leakage Characteristics 10 000 Instantaneous Forward Current (A) TA = 150 °C 10 TA = 125 °C TA = 25 °C 1 Junction Capacitance (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 100 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance Document Number: 89128 Revision: 13-May-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 21 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SS15P3S Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) K 0.016 (0.40) 0.006 (0.15) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.047 (1.20) 0.039 (1.00) Mounting Pad Layout 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.268 (6.80) 0.186 (4.72) MIN. 0.049 (1.24) 0.037 (0.94) 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) Conform to JEDEC TO-277A 0.050 (1.27) MIN. 0.041 (1.04) 0.055 (1.40) MIN. www.vishay.com 22 For technical questions within your region, please contact one of the following: Document Number: 89128 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 13-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1