SS1P3LHM3-84A

New Product SS1P3L, SS1P4L Vishay General Semiconductor Low VF High Current Density Surface Mount Schottky Barrier Rectifiers FEATURES eSMP ® Series • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency • Low thermal resistance • Meets MSL level 1, per LF maximum peak of 260 °C J-STD-020, DO-220AA (SMP) • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM EAS VF TJ max. 1.0 A 30 V, 40 V 50 A 11.25 mJ 0.35 V, 0.38 V 150 °C MECHANICAL DATA Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetive peak reverse voltage Maximum average forward rectified current (fig. 1) TL = 140 °C TL = 135 °C Peak forward surge current 10 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at IAS = 1.5 A, L = 10 mH, TJ = 25 °C Voltage rate of change (rated VR) Operating junction and storage temperature range VRRM IF(AV) IFSM EAS dV/dt TJ, TSTG SYMBOL SS1P3L 13L 30 1.0 A 1.5 50 11.25 10 000 - 55 to + 150 A mJ V/μs °C SS1P4L 14L 40 V UNIT Document Number: 88915 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SS1P3L, SS1P4L Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage TEST CONDITIONS IF = 1.0 A IF = 1.0 A Maximum reverse current at rated VR Typical junction capacitance 4.0 V, 1 MHz TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL VF (1) SS1P3L 0.45 0.35 200 20 110 SS1P4L 0.48 V 0.38 150 15 130 μA mA pF UNIT IR (2) CJ Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RJA Typical thermal resistance RJL RJC Note (1) (1) (1) (1) SS1P3L 105 15 20 SS1P4L UNIT °C/W Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. RJL is measured at the terminal of cathode band. RJC is measured at the top center of the body ORDERING INFORMATION (Example) PREFERRED P/N SS1P3L-M3/84A SS1P3L-M3/85A SS1P3LHM3/84A SS1P3LHM3/85A (1) (1) UNIT WEIGHT (g) 0.024 0.024 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A 84A 85A BASE QUANTITY 3000 10 000 3000 10 000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel Note (1) Automotive grade RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 2.0 50 Average Forward Rectified Current (A) Peak Forward Surge Current (A) 125 150 175 40 1.5 30 1.0 TL Measured at the Cathode Band Terminal 0.5 20 10 0 0 25 50 75 100 0 1 10 100 Lead Temperature (°C) Number of Cycles at 50 Hz Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current For technical questions within your region, please contact one of the following: Document Number: 88915 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SS1P3L, SS1P4L Vishay General Semiconductor 100 1000 Instantaneous Forward Current (A) TJ = 150 °C 10 Junction Capacitance (pF) 100 1 TJ = 25 °C SS1P3L SS1P4L 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 SS1P3L SS1P4L 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 000 1000 TJ = 150 °C 1000 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (μA) 100 SS1P3L 100 SS1P4L 10 TJ = 25 °C 10 SS1P3L SS1P4L 1 0.01 0.1 1 10 100 1 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) Cathode Band 0.012 (0.30) REF. 0.086 (2.18) 0.074 (1.88) 0.053 (1.35) 0.041 (1.05) 0.036 (0.91) 0.024 (0.61) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.025 0.030 (0.635) (0.762) 0.050 (1.27) Document Number: 88915 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1