SS210

SS29 & SS210 Vishay General Semiconductor High Voltage Surface Mount Schottky Rectifier FEATURES • Low profile package • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability DO-214AA (SMB) • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 1.5 A 90 V, 100 V 75 A 0.71 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Peak repetitive reverse surge current at tp = 2 µs, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM IRRM dV/dt TJ, TSTG SYMBOL SS29 S9 90 63 90 1.5 75 1.0 10 000 - 55 to + 150 SS210 S10 100 70 100 V V V A A A V/µs °C UNIT Document Number: 88749 Revision: 07-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 SS29 & SS210 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 0.1 A IF = 1.0 A IF = 3.0 A IF = 1.5 A IF = 3.0 A TA = 25 °C TA = 25 °C TA = 25 °C TA = 100 °C TA = 100 °C TA = 25 °C TA = 100 °C SYMBOL SS29 0.43 0.75 0.95 0.71 0.85 30 5 SS210 UNIT Maximum instantaneous forward voltage (1) VF V Maximum DC reverse current at rated VR (1) Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle IR µA mA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum thermal resistance (1) Note: (1) P.C.B. mounted with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas SYMBOL RθJA RθJL SS29 85 25 SS210 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N SS210-E3/52T SS210-E3/5BT SS210HE3/52T (1) SS210HE3/5BT (1) Note: (1) Automotive grade AEC Q101 qualified UNIT WEIGHT (g) 0.096 0.096 0.096 0.096 PREFERRED PACKAGE CODE 52T 5BT 52T 5BT BASE QUANTITY 750 3200 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.0 Resistive or Inductive Load 2.5 D = 0.8 Average Forward Current (A) 1.5 Average Power Loss (W) 2.0 D = 0.3 1.5 D = 0.2 D = 0.1 1.0 D = 0.5 D = 1.0 1.0 T 0.5 D = tp/T 0 tp 3.2 3.6 0.5 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0 0 25 50 75 100 125 150 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 Lead Temperature (°C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88749 Revision: 07-May-08 SS29 & SS210 Vishay General Semiconductor 100 10 000 Instantaneous Reverse Current (µA) Peak Forward Surge Current (A) TJ = 150 °C 1000 TJ = 125 °C 75 100 50 10 TJ = 25 °C 25 1 0 1 10 100 0.1 10 20 30 40 50 60 70 80 90 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Reverse Leakage Characteristics 100 1000 TJ = 150 °C TJ = 125 °C Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 100 TJ = 25 °C 1 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 10 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) MIN. 0.220 REF. 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) 0.060 (1.52) 0.030 (0.76) Document Number: 88749 Revision: 07-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1