SS22

SS22 thru SS26 Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • Low profile package • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. 2.0 A 20 V to 60 V 75 A 0.50 V, 0.70 V 125 °C, 150 °C DO-214AA (SMB) PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Max. average forward rectified current at TL (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at TA = 25 °C, IAS = 2.0 A, L = 10 mH Electrostatic discharge capacitor voltage Human body model: C = 100 pF, R = 1.5 kΩ Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range Document Number: 88748 Revision: 23-Jan-08 VRRM VRMS VDC IF(AV) IFSM EAS VC dV/dt TJ TSTG - 65 to + 125 - 65 to + 150 SYMBOL SS22 S2 20 14 20 SS23 S3 30 21 30 SS24 S4 40 28 40 2.0 75 20 8.0 10 000 - 65 to + 150 SS25 S5 50 35 50 SS26 S6 60 42 60 V V V A A mJ KV V/µs °C °C www.vishay.com 1 UNIT For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com SS22 thru SS26 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current at rated DC blocking voltage (1) Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle TEST CONDITIONS 2.0 A TA = 25 °C TA = 100 °C SYMBOL VF IR SS22 SS23 0.5 0.4 10 SS24 SS25 0.7 SS26 UNIT V mA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) P.C.B. mounted with 0.55 x 0.55" (14 x 14 mm) copper pad areas SYMBOL RθJA RθJL SS22 SS23 SS24 75 17 SS25 SS26 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N SS24-E3/52T SS24-E3/5BT SS24HE3/52T(1) SS24HE3/5BT Note: (1) Automotive grade AEC Q101 qualified (1) UNIT WEIGHT (g) 0.096 0.096 0.096 0.096 PREFERRED PACKAGE CODE 52T 5BT 52T 5BT BASE QUANTITY 750 3200 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.0 100 At Rated TL 8.3 ms Single Half Sine-Wave 80 1.5 Resistive or Inductive Load Peak Forward Surge Current (A) 130 150 170 Average Forward Current (A) 60 1.0 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas SS22 - SS24 SS25 & SS26 0 50 70 90 110 40 0.5 20 0 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88748 Revision: 23-Jan-08 SS22 thru SS26 Vishay General Semiconductor 100 1000 Instantaneous Forward Current (A) 10 TJ = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 Junction Capacitance (pF) TJ = 25 °C TJ = 125 °C 100 0.1 SS22 - SS24 SS25 & SS26 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 SS22 - SS24 SS25 & SS26 10 0.1 1 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 100 0.01 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Instantaneous Reverse Current (mA) SS22 - SS24 SS25 & SS26 10 TA = 125 °C 1 TA = 75 °C 0.1 TA = 25 °C 0.01 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Current Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 MAX. (2.159 MAX.) 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 MIN. (2.18 MIN.) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 MIN. (1.52 MIN.) 0.220 REF 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) 0.008 (0.2) 0 (0) Document Number: 88748 Revision: 23-Jan-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1