STPS1045BTRPBF

VS-STPS1045BPbF Vishay Semiconductors Schottky Rectifier, 10 A Base cathode 4, 2 FEATURES • Popular D-PAK outline • Small foot print, surface mountable • Low forward voltage drop D-PAK (TO-252AA) 1 Anode 3 Anode • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC PRODUCT SUMMARY Package IF(AV) VR VF at IF IRM TJ max. Diode variation EAS D-PAK (TO-252AA) 10 A 45 V 0.57 V 15 mA at 125 °C 175 °C Single die 20 mJ • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DESCRIPTION The VS-STPS1045BPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 10 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 10 45 390 0.57 - 40 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-STPS1045BPbF 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 Maximum peak one cycle non-repetitive surge current See fig. 7 Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 151 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied VALUES 10 390 75 20 3.0 mJ A A UNITS TJ = 25 °C, IAS = 3.0 A, L = 4.40 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94323 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 VS-STPS1045BPbF Vishay Semiconductors Schottky Rectifier, 10 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 10 A Maximum forward voltage drop See fig. 1 VFM (1) 20 A 10 A 20 A Maximum reverse leakage current See fig. 2 Typical junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.63 0.84 0.57 0.72 0.2 15 760 5.0 10 000 mA pF nH V/μs V UNITS VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, junction to ambient Approximate weight Marking device Note (1) SYMBOL TJ (1), TStg RthJC RthJA DC operation See fig. 4 TEST CONDITIONS VALUES - 40 to 175 3.0 UNITS °C °C/W 50 0.3 0.01 g oz. Case style D-PAK (similar to TO-252AA) STPS1045B dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94323 Revision: 14-Jan-11 VS-STPS1045BPbF Schottky Rectifier, 10 A Vishay Semiconductors 100 1000 IR - Reverse Current (mA) 100 10 1.0 0.1 0.01 TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C IF - Instantaneous Forward Current (A) 10 TJ = 75 °C TJ = 50 °C TJ = 25 °C TJ = 175 °C TJ = 125 °C TJ = 25 °C 1 0.001 0.0001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 10 20 30 40 50 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10 000 CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 0.1 Single pulse (thermal resistance) 0.01 0.00001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.001 0.01 0.1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 1 10 0.0001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94323 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 VS-STPS1045BPbF Vishay Semiconductors 180 Schottky Rectifier, 10 A Allowable Case Temperature (°C) 16 Average Power Loss (W) 14 12 10 8 6 4 2 0 RMS limit 170 DC 160 150 Square wave (D = 0.50) 80 % rated VR applied See note (1) DC D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 140 0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 14 16 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94323 Revision: 14-Jan-11 VS-STPS1045BPbF Schottky Rectifier, 10 A Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- STPS 1 1 2 3 4 5 6 2 10 3 45 4 B 5 TRL PbF 6 7 Vishay Semiconductors product Schottky STPS series Current rating (10 A) Voltage rating (45 = 45 V) B = Essential part number None = Tube (50 pieces) TR = Tape and reel TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) PbF = Lead (Pb)-free 7 - LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95016 www.vishay.com/doc?95059 www.vishay.com/doc?95033 Document Number: 94323 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5) E b3 Ø2 (3) A 0.010 M C A B L3 (3) 4 B D (5) 1 2 3 L4 Ø1 Seating plane H D1 0.488 (12.40) 0.409 (10.40) A C c2 A Pad layout 0.265 MIN. (6.74) E1 4 0.245 MIN. (6.23) 3 2 1 (2) L5 b b2 2x e Detail “C” c 0.010 M C A B Detail “C” Rotated 90 °CW Scale: 20:1 Lead tip Gauge plane L2 Ø C C L 0.089 MIN. (2.28) A 0.06 MIN. (1.524) 0.093 (2.38) 0.085 (2.18) (L1) H (7) C Seating plane A1 SYMBOL A A1 b b2 b3 c c2 D D1 E E1 Notes (1) (2) (3) (4) (5) MILLIMETERS MIN. 2.18 0.64 0.76 4.95 0.46 0.46 5.97 5.21 6.35 4.32 MAX. 2.39 0.13 0.89 1.14 5.46 0.61 0.89 6.22 6.73 - INCHES MIN. 0.086 0.025 0.030 0.195 0.018 0.018 0.235 0.205 0.250 0.170 MAX. 0.094 0.005 0.035 0.045 0.215 0.024 0.035 0.245 0.265 - NOTES SYMBOL e H L L1 MILLIMETERS MIN. 9.40 1.40 MAX. 10.41 1.78 2.29 BSC INCHES MIN. 0.370 0.055 MAX. 0.410 0.070 0.090 BSC NOTES 2.74 BSC 0.51 BSC 0.89 1.14 0° 0° 25° 1.27 1.02 1.52 10° 15° 35° 0.108 REF. 0.020 BSC 0.035 0.045 0° 0° 25° 0.050 0.040 0.060 10° 15° 35° 2 3 3 L2 L3 L4 5 3 5 3 L5 Ø Ø1 Ø2 Dimensioning and tolerancing as per ASME Y14.5M-1994 Lead dimension uncontrolled in L5 Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Dimension b1 and c1 applied to base metal only Datum A and B to be determined at datum plane H Outline conforms to JEDEC outline TO-252AA (6) (7) (8) Document Number: 95016 Revision: 04-Nov-08 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1