SUF15G

SUF15G & SUF15J Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low switching losses, high efficiency • Low leakage current • High forward surge capability • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: GP20 Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end GP20 PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 1.5 A 400 V, 600 V 50 A 35 ns 1.8 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current, 0.375" (9.5 mm) lead length at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM TJ, TSTG SUF15G 400 280 400 1.5 50 - 55 to + 150 SUF15J 600 420 600 UNIT V V V A A °C ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum peak reverse current at rated peak reverse voltage Maximum reverse recovery time Typical junction capacitance 1.5 A TA = 25 °C TA = 100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz TEST CONDITIONS SYMBOL VF IR trr CJ SUF15G 1.8 10 100 35 35 SUF15J UNIT V µA ns pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle Document Number: 88753 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 SUF15G & SUF15J Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted SYMBOL RθJA RθJL SUF15G 65 20 SUF15J UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N SUF15J-E3/54 SUF15J-E3/73 UNIT WEIGHT (g) 0.886 0.886 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 1400 1000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.50 100 Average Forward Rectified Current (A) Instantaneous Forward Current (A) 1.25 1.00 Mounted on P.C.B. with 0.2 x 0.2" (0.5 x 0.5 mm) Copper Leads at Lead Length = 0.375" (9.5 mm) TJ = 150 °C 10 TJ = 125 °C 0.75 1 TJ = 100 °C 0.1 TJ = 25 °C SUF15G 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.50 0.25 Resistive or Inductive Load 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Maximum Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics 100 100 Peak Forward Surge Current (A) Instantaneous Reverse Leakage Current (µA) TA = 50 °C 8.3 ms Single Half Sine-Wave TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 10 0.1 TJ = 25 °C SUF15G 0.01 1 1 10 100 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 4. Typical Reverse Leakage Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88753 Revision: 20-Aug-07 SUF15G & SUF15J Vishay General Semiconductor 100 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 125 °C 1 0.1 TJ = 100 °C TJ = 25 °C SUF15J 1.6 1.8 2.0 2.2 10 0.1 1 10 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Junction Capacitance (pF) TJ = 150 °C Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics Figure 7. Typical Junction Capacitance 1000 1000 TJ = 150 °C 100 TJ = 125 °C TJ = 100 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Leakage Current (µA) 100 10 1 10 0.1 TJ = 25 °C SUF15J 0.01 0 20 40 60 80 100 1 0.01 0.1 1 10 100 Percent of Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 6. Typical Reverse Leakage Characteristics Figure 8. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GP20 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.037 (0.94) DIA. Document Number: 88753 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1