T1070P

T1070P Vishay Semiconductors Silicon NPN Phototransistor FEATURES • Package type: chip • Package form: single chip • Dimensions (L x W x H in mm): 0.72 x 0.72 x 0.22 • Wafer diameter (in mm): 100 • Radiant sensitive area (in mm2): 0.25 • High photo sensitivity • Suitable for visible light • Fast response times • Angle of half sensitivity:  = ± 60° 21682 E B • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DESCRIPTION T1070P ambient light sensor chip is a silicon NPN epitaxial planar phototransistor. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm. APPLICATIONS • Ambient light sensor • Backlight dimmer GENERAL INFORMATION The datasheet is based on Vishay optoelectronics sample testing under certain predetermined and assumed conditions, and is provided for illustration purpose only. Customers are encouraged to perform testing in actual proposed packaged and used conditions. Vishay optoelectronics die products are tested using Vishay optoelectronics based quality assurance procedures and are manufactured using Vishay optoelectronics established processes. Estimates such as those described and set forth in this datasheet for semiconductor die will vary depending on a number of packaging, handling, use, and other factors. Therefore sold die may not perform on an equivalent basis to standard package products. PRODUCT SUMMARY COMPONENT T1070P Note • Test condition see table “Basic Characteristics” IPCE (μA) 50  (deg) ± 60 0.5 (nm) 440 to 800 ORDERING INFORMATION ORDERING CODE T1070P-SD-F Note • MOQ: minimum order quantity PACKAGING Wafer sawn on foil with disco frame REMARKS MOQ: 55 000 pcs PACKAGE FORM Chip ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Collector emitter voltage Emitter collector voltage Collector current Junction temperature Operating temperature range Storage temperature range Storage temperature range on foil Document Number: 81119 Rev. 1.4, 23-Mar-11 TEST CONDITION SYMBOL VCEO VECO IC Tj Tamb Tstg1 Tstg2 For technical questions, contact: optochipsupport@vishay.com VALUE 6 1.5 20 100 - 40 to + 100 - 40 to + 100 - 40 to + 50 UNIT V V mA °C °C °C °C www.vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T1070P Vishay Semiconductors Silicon NPN Phototransistor BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Collector emitter breakdown voltage Collector dark current Collector emitter capacitance TEST CONDITION IC = 0.1 mA VCE = 5 V, E = 0 VCE = 0 V, f = 1 MHz, E = 0 EV = 20 lx, CIE illuminant A, VCE = 5 V EV = 100 lx, CIE illuminant A, VCE = 5 V CIE illuminant A LED, white SYMBOL V(BR)CEO ICEO CCEO IPCE IPCE TKIPCE TKIPCE  p 0.5 EV = 20 lx, CIE illuminant A, IPCE = 1.2 μA VCEsat MIN. 6 3 16 10 50 1.18 0.9 ± 60 570 440 to 800 0.1 50 TYP. MAX. UNIT V nA pF μA μA %/K %/K deg nm nm V Collector light current Temperature coefficient of IPCE Angle of half sensitivity Wavelength of peak sensitivity Range of spectral bandwidth Collector emitter saturation voltage Notes • The measurements are based on samples of die which are mounted on a TO-header without resin coating BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 -6 ICEO - Collector Dark Current (A) 10 -7 10 -8 10 -9 10 -10 10 -11 10 -12 10 -13 - 40 19758 1000 IPCE - Photo Current (µA) VCE = 5 V 100 10 1 - 20 0 20 40 60 80 Tamb - Ambient Temperature (°C) 100 10 19760 100 E v - Illuminance (Ix) 1000 Fig. 1 - Collector Dark Current vs. Ambient Temperature CCE0 - Collector Emitter Capacitance (pF) Fig. 3 - Photo Current vs. Illuminance 25 f = 1 MHz 20 15 10 2.2 IPCE rel - Relative Photo Current 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 VCE = 5 V, white LED - 40 - 20 0 20 40 60 80 Tamb - Ambient Temperature (°C) 100 5 0 0.1 19759 19762 1.0 10.0 VCE - Collector Emitter Voltage (V) Fig. 2 - Relative Photo Current vs. Ambient Temperature Fig. 4 - Collector Emitter Capacitance vs. Collector Emitter Voltage www.vishay.com 2 For technical questions, contact: optochipsupport@vishay.com Document Number: 81119 Rev. 1.4, 23-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T1070P Silicon NPN Phototransistor Vishay Semiconductors 1.0 S(λ)rel - Relative Spectral Sensitivity 20019 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 300 400 500 600 700 800 900 1000 1100 λ - Wavelength (nm) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength MECHANICAL DIMENSIONS PARAMETER Length of chip edge (x-direction) Length of chip edge (y-direction) Sensitive area Die height Bond pad emitter (E) SYMBOL Lx Ly AS H axb (1) MIN. TYP. 0.72 0.72 0.5 x 0.5 0.22 0.1 x 0.1 MAX. UNIT mm mm mm2 mm mm2 ADDITIONAL INFORMATION Frontside metallization, anode Backside metallization, cathode Dicing Die bonding technology Aluminum Gold alloy Sawing Epoxy bonding Note (1) All chips are checked in accordance with the Vishay Semiconductor, specification of visual inspection FVOV6870. The visual inspection shall be made in accordance with the “specification of visual inspection as referenced”. The visual inspection of chip backside is performed with stereo microscope with incident light and 40x to 80x magnification. The quality inspection (final visual inspection) is performed by production. An additional visual inspection step as special release procedure by QM is not installed. HANDLING AND STORAGE CONDITIONS • The hermetically sealed shipment lots shall be opened in temperature and moisture controlled cleanroom environment only. It is mandatory to follow the rules for disposition of material that can be hazardous for humans and environment. • Product must be handled only at ESD safe workstations. Standard ESD precautions and safe work environments are as defined in MIL-HDBK-263. • Singulated die are not to be handled with tweezers. A vacuum wand with non metallic ESD protected tip should be used. PACKING Chips are fixed on adhesive foil. Upon request the foils can be mounted on plastic frame or disco frame. For shipment, the wafers are arranged to stacks and hermetically sealed in plastic bags to ensure protection against environmental influence (humidity and contamination). Use for recycling reliable operators only. We can help getting in touch with your nearest sales office. By agreement we will take back packing material, if it is sorted. You will have to bear the costs of transport. We will invoice you for any costs incurred for packing material that is returned unsorted or which we are not obliged to accept. Document Number: 81119 Rev. 1.4, 23-Mar-11 For technical questions, contact: optochipsupport@vishay.com www.vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1