T97

T97 Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case FEATURES • High reliability; Weibull failure rate grading available • Surge current testing per MIL-PRF-55365 options available • Ultra-low ESR • Tin/Lead (SnPb) termination available Pb-free Available RoHS* COMPLIANT PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Capacitance Range: 15 µF to 1500 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 WVDC to 63 WVDC ORDERING INFORMATION T97 TYPE R CASE CODE 227 K CAPACITANCE CAPACITANCE TOLERANCE 020 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). E TERMINATION/ PACKAGING (Available options are series dependent) E = Sn/Pb Solder/7" (178 mm) reel L = Sn/Pb Solder/7" (178 mm), 1/2 reel C = 100 % Tin/7" (178 mm), reel H = 100 % Tin/7" (178 mm), 1/2 reel S RELIABILITY LEVEL A SURGE CURRENT See Ratings and Case Codes Table. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % A = 1.0 % Weibull B = 0.1 % Weibull (1) S = 40 h Burn-in Z = NonEstablished Reliability A = 10 cycles at + 25 °C B = 10 cycles at - 55 °C/+ 85 °C S = 3 cycles at 25 °C Note: (1) Available on select ratings. See ratings table on page 7. DIMENSIONS in inches [millimeters] Tantalum wire Nib identifies Anode (+) Terminal L J D B A H W CASE CODE E F R V Z L (MAX.) 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] W 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 + 0.016/- 0.024 [6.0 + 0.4/- 0.6] 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] H 0.157 ± 0.016 [4.0 ± 0.4] 0.187 ± 0.016 [4.7 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.079 [2.0] Max. 0.238 ± 0.016 [6.0 ± 0.4] A 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] B 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] D (REF.) 0.253 [6.4] 0.243 [6.2] 0.243 [6.2] 0.253 [6.4] 0.243 [6.2] J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note: The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 1 For technical questions, contact: tantalum@vishay.com Document Number: 40092 Revision: 05-Aug-08 T97 Solid Tantalum Chip Capacitors TANTAMOUNT® Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case RATINGS AND CASE CODE µF 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V E/R R F Z* 63 V 75 V Vishay Sprague F* R R F E V E E/R R V E E R E E R F* R F* STANDARD RATINGS CAPACITANCE (µF) 470 680 1000 1000 1500 330 470 680 1000 330 470 680 220 470 220 330 68 150 47 15 15 22 33 47 22 CASE CODE MAX. DCL MAX. DF MAX. ESR at + 25 °C at + 25 °C at + 25 °C (µA) 120 Hz (%) 100 kHz (mΩ) 4 WVDC at + 85 °C, SURGE = 5.2 V . . . 2.7 WVDC at + 125 °C, SURGE = 3.4 V T97V477(1)004(2)(3)(5) 19 8 30 T97E687(1)004(2)(3)(5) 27 6 25 T97E108(1)004(2)(3)(5) 40 8 20 T97R108(1)004(2)(3)(5) 40 8 18 T97R158(1)004(2)(3)(5) 60 8 15 6.3 WVDC at + 85 °C, SURGE = 8 V . . . 4 WVDC at + 125 °C, SURGE = 5 V T97V337(1)6R3(2)(3)(5) 21 8 35 T97E477(1)6R3(2)(3)(5) 30 6 30 T97E687(1)6R3(2)(3)(5) 43 6 25 T97R108(1)6R3(2)(3)(5) 63 8 20 10 WVDC at + 85 °C, SURGE = 13 V . . . 7 WVDC at + 125 °C, SURGE = 8 V T97E337(1)010(2)(3)(5) 33 6 35 T97E477(1)010(2)(3)(5) 47 6 28 T97R687(1)010(2)(3)(5) 68 6 28 16 WVDC at + 85 °C, SURGE = 20 V . . . 10 WVDC at + 125 °C, SURGE = 12 V T97E227(1)016(2)(3)(5) 35 8 40 T97E477(1)016(2)(3)(5)* 75 14 100 20 WVDC at + 85 °C, SURGE = 26 V . . . 13 WVDC at + 125 °C, SURGE = 16 V T97R227(1)020(2)(3)(5) 44 8 80 T97F337(1)020(2)(3)(5)* 66 10 100 25 WVDC at + 85 °C, SURGE = 32 V . . . 17 WVDC at + 125 °C, SURGE = 20 V T97R686(1)025(2)(4)(5) 17 6 100 T97F157(1)025(2)(4)(5) 38 8 80 35 WVDC at + 85 °C, SURGE = 46 V . . . 23 WVDC at + 125 °C, SURGE = 28 V T97R476(1)035(2)(3)(5) 17 6 80 50 WVDC at + 85 °C, SURGE = 65 V . . . 33 WVDC at + 125 °C, SURGE = 38 V T97E156(1)050(2)(4)(5) 8 6 300 T97R156(1)050(2)(3)(5) 8 6 250 T97R226(1)050(2)(3)(5) 11 6 170 T97F336(1)050(2)(3)(5) 17 6 150 T97Z476(1)050(2)(3)(5)* 24 6 145 63 WVDC at + 85 °C, SURGE = 81 V . . . 42 WVDC at + 125 °C, SURGE = 54 V T97F226(1)063(2)(3)(5)* 14 6 200 PART NUMBER* (3) Reliability Level: A, S, Z (4) Reliability Level: A,B, S, Z (5) Surge Current: A, B, S MAX. RIPPLE 100 kHz IRMS (A) 2.2 2.9 3.3 3.7 4.1 2.0 2.7 2.9 3.5 2.5 2.8 2.9 2.3 1.4 1.8 1.4 1.6 1.8 1.8 0.8 1.0 0.8 0.8 1.1 0.9 V E E R R V E E R E E R E F R F R F R E R R F Z F Notes: * Contact factory for availability (1) Capacitance Tolerance: K, M (2) Termination and Packaging: C, E, H, L Document Number: 40092 Revision: 05-Aug-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 2 T97 Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case TYPICAL CURVES T97 1500 µF - 4 V 'R' CASE SIZE ESR and Z vs. FREQUENCY 1 ESR ESR and Z (Ω) ESR and Z (Ω) Z T97 330 µF - 10 V 'E' CASE SIZE ESR and Z vs. FREQUENCY 1 ESR Z 0.1 0.1 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz T97 1000 µF - 4 V 'E' CASE SIZE ESR and Z vs. FREQUENCY 1 ESR ESR and Z (Ω) T97 1000 µF - 6.3 V 'R' CASE SIZE ESR and Z vs. FREQUENCY 1 ESR ESR and Z (Ω) Z Z 0.1 0.1 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz T97 330 µF - 6.3 V 'V' CASE SIZE ESR and Z vs. FREQUENCY 10 ESR T97 470 µF - 4 V 'V' CASE SIZE ESR and Z vs. FREQUENCY 10 ESR ESR and Z (Ω) ESR and Z (Ω) 1 Z 1 Z 0.1 0.1 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz www.vishay.com 3 For technical questions, contact: tantalum@vishay.com Document Number: 40092 Revision: 05-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1