T97
www.vishay.com
Vishay Sprague
Solid Tantalum Chip Capacitors TANTAMOUNT®, Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case
FEATURES
• High reliability; Weibull failure rate grading available • Surge current testing per MIL-PRF-55365 options available • Ultra-low ESR • Tin/lead (SnPb) termination available • Mounting: Surface mount • Compliant to RoHS Directive 2002/95/EC
Note * Pb containing terminations are not RoHS compliant, exemptions may apply
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088 Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Capacitance Range: 10 μF to 1500 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 75 VDC
ORDERING INFORMATION
T97 TYPE R CASE CODE 227 CAPACITANCE K CAPACITANCE TOLERANCE 020 DC VOLTAGE RATING AT + 85 °C E TERMINATION/ PACKAGING (available options are series dependent) E = Sn/Pb solder/ 7" (178 mm) reel L = Sn/Pb solder/ 7" (178 mm), 1/2 reel C = 100 % tin/ 7" (178 mm), reel H = 100 % tin/ 7" (178 mm), 1/2 reel S RELIABILITY LEVEL A SURGE CURRENT
See Ratings and Case Code table
This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow.
K = ± 10 % M = ± 20 %
This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V).
A = 1.0 % Weibull B = 0.1 % Weibull (1) S = 40 h burn-in Z = Nonestablished reliability
A = 10 cycles at + 25 °C B = 10 cycles at - 55 °C/ + 85 °C S = 3 cycles at 25 °C
Notes (1) Available on select ratings. See “Standard Ratings” table. • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
J Tantalum wire nib identifies anode (+) terminal L H B A D W
CASE CODE V D E R F Z M H N
L (MAX.) 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.315 [8] 0.315 [8] 0.315 [8.0]
W 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.259 + 0.016/- 0.024 [6.6 + 0.4/- 0.6]
H 0.079 [2.0 max.] 0.138 [3.5 max.] 0.157 ± 0.016 [4.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.185 ± 0.016 [4.7 ± 0.4] 0.236 ± 0.016 [6.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.205 ± 0.016 [5.2 ± 0.4] 0.252 ± 0.016 [6.4 ± 0.4]
A 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.055 ± 0.016 [1.4 ± 0.4] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.056 ± 0.017 [1.4 ± 0.4]
B 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.196 ± 0.025 [5.0 ± 0.6]
D (REF.) 0.252 [6.4] 0.252 [6.4] 0.252 [6.4] 0.244 [6.2] 0.244 [6.2] 0.244 [6.2] 0.260 [6.6] 0.260 [6.6] 0.259 [6.6]
J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1]
Note • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] Revision: 05-Dec-11 Document Number: 40092 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T97
www.vishay.com
Vishay Sprague
10 V 16 V 20 V 25 V 35 V 50 V E/R R F Z/N 63 V D R F 75 V R (1)
RATINGS AND CASE CODES
μF 4V 6.3 V 10 15 22 33 47 68 100 150 220 330 V 470 V E 680 E E 1000 E/R R 1500 R Note (1) Contact factory for availability
E E R F
E F H
R H/F
R F F M
R F F
STANDARD RATINGS
CAPACITANCE (μF) CASE CODE MAX. DF AT + 25 °C 120 Hz (%) 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C T97V477(1)004(2)(4)(5) 19 8 T97E687(1)004(2)(4)(5) 27 6 T97E108(1)004(2)(4)(5) 40 8 T97R108(1)004(2)(4)(5) 40 8 T97R158(1)004(2)(4)(5) 60 8 6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C T97V337(1)6R3(2)(4)(5) 21 8 T97E477(1)6R3(2)(4)(5) 30 6 T97E687(1)6R3(2)(4)(5) 43 6 T97R108(1)6R3(2)(4)(5) 63 8 10 VDC AT + 85 °C; 7 WVDC AT + 125 °C T97E337(1)010(2)(4)(5) 33 6 T97E477(1)010(2)(4)(5) 47 6 T97R687(1)010(2)(6)(5) 68 6 T97F108(1)010(2)(3)(5) 100 20 16 WVDC AT + 85 °C; 10 VDC AT + 125 °C T97E227(1)016(2)(4)(5) 35 8 T97F337(1)016(2)(4)(5) 53 10 T97H477(1)016(2)(4)(5) 75 14 20 VDC AT + 85 °C; 13 VDC AT + 125 °C T97R227(1)020(2)(4)(5) 44 8 T97F337(1)020(2)(6)(5) 66 10 T97H337(1)020(2)(4)(5) 66 10 25 VDC AT + 85 °C; 17 VDC AT + 125 °C T97R686(1)025(2)(4)(5) 17 6 T97F107(1)025(2)(4)(5) 25 8 PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. ESR AT + 25 °C 100 kHz (m) 60 25 20 18 24 56 30 25 31 35 28 28 120 60 100 100 80 100 100 100 100 MAX. RIPPLE 100 kHz IRMS (A) 2.2 2.9 3.3 3.7 2.9 2.0 2.7 2.9 2.8 2.5 2.8 3 1.4 2.3 1.6 1.4 1.8 1.6 1.6 1.6 1.6 AVAILABLE RELIABILITY LEVELS A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z S, Z A, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z S, Z A, B, S, Z A, B, S, Z A, B, S, Z
470 680 1000 1000 1500 330 470 680 1000 330 470 680 1000 220 330 470 220 330 330 68 100
V E E R R V E E R E E R F E F H R F H R F
Notes • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, E, H, L (3) Reliability level: A, S, Z (4) Reliability level: A, B, S, Z (5) Surge current: A, B, S (6) Reliability level: S, Z (1) Contact factory for availability Revision: 05-Dec-11 Document Number: 40092 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T97
www.vishay.com
Vishay Sprague
MAX. ESR AT + 25 °C 100 kHz (m) 80 100 100 100 100 300 250 220 150 240 150 400 400 250 500 MAX. RIPPLE 100 kHz IRMS (A) 1.8 1.6 1.6 1.6 1.6 0.9 1 1.1 1.3 1.1 1.4 0.6 0.8 1.0 0.7
STANDARD RATINGS
CAPACITANCE (μF) CASE CODE MAX. DF AT + 25 °C 120 Hz (%) 25 VDC AT + 85 °C; 17 VDC AT + 125 °C T97F157(1)025(2)(4)(5) 38 8 T97M227(1)025(2)(3)(5) 55 8 35 VDC AT + 85 °C; 23 VDC AT + 125 °C T97R476(1)035(2)(4)(5) 17 6 T97F686(1)035(2)(3)(5) 24 6 T97F107M035(2)(3)(5) 35 8 50 VDC AT + 85 °C; 33 VDC AT + 125 °C T97E156(1)050(2)(4)(5) 8 6 T97R156(1)050(2)(4)(5) 8 6 T97R226(1)050(2)(4)(5) 11 6 T97F336(1)050(2)(3)(5) 17 6 T97Z476(1)050(2)(6)(5) 24 6 T97N476(1)050(2)(4)(5) 24 6 63 VDC AT + 85 °C; 42 VDC AT + 125 °C T97D106(1)063(2)(3)(5) 10 6 T97R156(1)063(2)(6)(5) 10 6 T97F226(1)063(2)(3)(5) 14 6 75 VDC AT + 85 °C; 50 VDC AT + 125 °C T97R106(1)075(2)(6)(5) 8 6 PART NUMBER MAX. DCL AT + 25 °C (μA) AVAILABLE RELIABILITY LEVELS A, B, S, Z A, S, Z A, B, S, Z A, S, Z A, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, S, Z S, Z A, B, S, Z A, S, Z S, Z A, S, Z S, Z
150 220 47 68 100 15 15 22 33 47 47 10 15 22
F M R F F E R R F Z N D R F
10 R (1) Notes • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, E, H, L (3) Reliability level: A, S, Z (4) Reliability level: A, B, S, Z (5) Surge current: A, B, S (6) Reliability level: S, Z (1) Contact factory for availability
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating 4.0 6.3 10 16 20 25 35 50 63 75 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Capacitor Voltage Rating 4.0 6.3 10 16 20 25 35 50 63 75 Revision: 05-Dec-11 Operating Voltage 2.5 3.6 6.0 10 12 15 24 28 37.8 45 Operating Voltage 2.5 3.3 5.0 8.0 10 12 15 24 32 37
Document Number: 40092 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T97
www.vishay.com
Vishay Sprague
TYPICAL CURVES
1500 μF - 4 V “R” CASE SIZE ESR and Z vs. FREQUENCY 1 1 ESR Z ESR and Z () ESR and Z (Ω) ESR Z 330 μF - 10 V “E” CASE SIZE ESR and Z vs. FREQUENCY
0.1
0.1
0.01 100 Hz
1 kHz
10 kHz FREQUENCY
100 kHz
1 MHz
0.01 100 Hz
1 kHz
10 kHz FREQUENCY
100 kHz
1 MHz
330 μF - 6.3 V “V” CASE SIZE and Z vs. FREQUENCY 10 ESR Z
ESR and Z ()
1000 μF - 6.3 V “R” CASE SIZE ESR and Z vs. FREQUENCY 1 ESR Z ESR and Z ()
1
0.1
0.1
0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz
0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz
470 μF - 4 V “V” CASE SIZE ESR and Z vs. FREQUENCY 10 ESR Z
ESR and Z (Ω)
1
0.1
0.01
100 Hz
1 kHz
10 kHz FREQUENCY
100 kHz
1 MHz
Revision: 05-Dec-11
Document Number: 40092 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T97
www.vishay.com
Vishay Sprague
POWER DISSIPATION
CASE CODE V D E R, F, M Z H N MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR 0.141 0.215 0.240 0.250 0.265 0.265 0.280
STANDARD PACKAGING QUANTITY
CASE CODE V D E R F Z M H N UNITS PER REEL 7" FULL REEL 1000 400 500 300 250 250 200 200 200 7" HALF REEL 500 200 250 150 125 125 100 100 100
PRODUCT INFORMATION Conformal Coated Guide Pad Dimensions Packaging Dimensions Moisture Sensitivity SELECTOR GUIDES Solid Tantalum Selector Guide FAQ Frequently Asked Questions www.vishay.com/doc?40110 www.vishay.com/doc?49053 www.vishay.com/doc?40135 www.vishay.com/doc?40150
Revision: 05-Dec-11
Document Number: 40092 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
