T98V227M020CSA

T98 Vishay Sprague TANTAMOUNT® Low ESR, Hi-Rel COTS, Built-In Fuse Conformal Coated FEATURES • High reliability; Weibull failure rate grading available Pb-free Available • Surge current testing per MIL-PRF-55365 options available RoHS* COMPLIANT • Ultra-low ESR • Terminations: SnPb, standard. 100 % Tin available • Circuit protection for mission or safety critcal systems • Fuse characteristics: Guaranteed fuse protection at 9 A, 100 ms PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Capacitance Range: 15 µF to 1500 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 WVDC to 63 WVDC ORDERING INFORMATION T98 TYPE R CASE CODE 227 K CAPACITANCE CAPACITANCE TOLERANCE 020 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V). E TERMINATION/ PACKAGING (Available options are series dependent) E = Sn/Pb Solder/7" (178 mm) reel L = Sn/Pb Solder/7" (178 mm), 1/2 reel C = 100 % Tin/7" (178 mm), reel H = 100 % Tin/7" (178 mm), 1/2 reel S RELIABILITY LEVEL A SURGE CURRENT See Ratings and Case Codes Table. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % A = 1.0 % Weibull B = 0.1 % Weibull (1) S = 40 h Burn-in Z = NonEstablished Reliability A = 10 Cycles at + 25 °C B = 10 Cycles at - 55 °C/+ 85 °C S = 3 Cycles at 25 °c Note: (1) Available on select ratings. See ratings table on page 7 DIMENSIONS in inches [millimeters] W L J D B A H CASE CODE E F R V Z L (MAX.) 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.287 ± 0.012 [7.3 ± 0.3] W 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 + 0.016/- 0.024 [6.0 + 0.4/- 0.6] 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] H 0.157 ± 0.016 [4.0 ± 0.4] 0.187 ± 0.016 [4.7 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.079 [2.0] Max. 0.238 ± 0.016 [6.0 ± 0.4] A 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] B 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] 0.180 ± 0.025 [4.6 ± 0.6] D (REF.) 0.253 [6.4] 0.243 [6.2] 0.243 [6.2] 0.253 [6.4] 0.243 [6.2] J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note: The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 40119 Revision: 25-Jun-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 1 T98 Vishay Sprague TANTAMOUNT® Low ESR, Hi-Rel COTS, Built-In Fuse Conformal Coated RATINGS AND CASE CODE µF 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 Note: • All ratings are preliminary, contact marketing for availability V E E/R R V E E R E E R E R F F R R E/R R F Z F 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V 75 V STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. DCL at + 25 °C (µA) MAX. DF at + 25 °C 120 Hz (%) (PRELIMINARY) MAX. ESR at + 25 °C 100 kHz (mΩ) MAX. RIPPLE 100 kHz IRMS (A) 4 WVDC at + 85 °C, SURGE = 5.2 V . . . 2.7 WVDC at + 125 °C, SURGE = 3.4 V 470 680 1000 1000 1500 330 470 680 1000 330 470 680 220 V E E R R V E E R E E R E T98V477(1)004(2)(3)(4) T98E687(1)004(2)(3)(4) T98E108(1)004(2)(3)(4) T98R108(1)004(2)(3)(4) T98R158(1)004(2)(3)(4) T98V337(1)6R3(2)(3)(4) T98E477(1)6R3(2)(3)(4) T98E687(1)6R3(2)(3)(4) T98R108(1)6R3(2)(3)(4) T98E337(1)010(2)(3)(4) T98E477(1)010(2)(3)(4) T98R687(1)010(2)(3)(4) T98E227(1)016(2)(3)(4) 19 27 40 40 60 21 30 43 63 33 47 68 35 8 6 8 8 8 8 6 6 8 6 6 6 8 60 55 50 48 45 65 60 55 50 65 58 58 70 2.2 2.9 3.3 3.7 4.1 2.0 2.7 2.9 3.5 2.5 2.8 2.9 2.3 6.3 WVDC at + 85 °C, SURGE = 8 V . . . 4 WVDC at + 125 °C, SURGE = 5 V 10 WVDC at + 85 °C, SURGE = 13 V . . . 7 WVDC at + 125 °C, SURGE = 8 V 16 WVDC at + 85 °C, SURGE = 20 V . . . 10 WVDC at + 125 °C, SURGE = 12 V Notes: • All ratings are preliminary, contact marketing for availability * Contact factory for availability (1) Capacitance Tolerance: K, M (2) Termination and Packaging: C, E, H, L (3) Reliability Level: A, B, S, Z (4) Surge Current: A, B, S www.vishay.com 2 For technical questions, contact: tantalum@vishay.com Document Number: 40119 Revision: 25-Jun-08 T98 TANTAMOUNT® Low ESR, Hi-Rel COTS, Built-In Fuse Conformal Coated STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. DCL at + 25 °C (µA) MAX. DF at + 25 °C 120 Hz (%) (PRELIMINARY) MAX. ESR at + 25 °C 100 kHz (mΩ) MAX. RIPPLE 100 kHz IRMS (A) Vishay Sprague 20 WVDC at + 85 °C, SURGE = 26 V . . . 13 WVDC at + 125 °C, SURGE = 16 V 220 330 R F T98R227(1)020(2)(3)(4) T98F337(1)020(2)(3)(4)* 44 66 8 10 110 130 1.8 1.4 25 WVDC at + 85 °C, SURGE = 32 V . . . 17 WVDC at + 125 °C, SURGE = 20 V 68 150 R F T98R686(1)025(2)(3)(4) T98F157(1)025(2)(3)(4) 17 38 6 8 130 110 1.6 1.8 35 WVDC at + 85 °C, SURGE = 46 V . . . 23 WVDC at + 125 °C, SURGE = 28 V 47 R T98R476(1)035(2)(3)(4) 17 6 110 1.8 50 WVDC at + 85 °C, SURGE = 65 V . . . 33 WVDC at + 125 °C, SURGE = 38 V 15 15 22 33 47 E R R F Z T98E156(1)050(2)(3)(4) T98R156(1)050(2)(3)(4) T98R226(1)050(2)(3)(4) T98F336(1)050(2)(3)(4) T98Z476(1)050(2)(3)(4)* 8 8 11 17 24 6 6 6 6 6 330 280 200 180 175 0.8 1.0 0.8 0.8 1.1 63 WVDC at + 85 °C, SURGE = 81 V . . . 42 WVDC at + 125 °C, SURGE = 54 V 22 F T98F226(1)063(2)(3)(4)* 14 6 230 0.9 Notes: • All ratings are preliminary, contact marketing for availability * Contact factory for availability (1) Capacitance Tolerance: K, M (2) Termination and Packaging: C, E, H, L (3) Reliability Level: A, B, S, Z (4) Surge Current: A, B, S Document Number: 40119 Revision: 25-Jun-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1