TLMA3100

TLMA3100 Vishay Telefunken Low Current SMD LED Color Yellow Type TLMA3100 Technology GaAsP on GaP Angle of Half Intensity ±ö 60° Description These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the TLMA3100 is the P–LCC–2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is surrounded with a white thermoplast. The reflector inside this package is filled up with clear epoxy. Features D D D D SMD LED with exceptional brightness Compatible with automatic placement equipment EIA and ICE standard package Compatible with infrared, vapor phase and wave solder processes according to CECC 94 8553 D Available in 8 mm tape D Low profile package D Non-diffused lens: excellent for coupling to light pipes and backlighting D Very low power consumption D Luminous intensity ratio in one packaging unit IVmax/IVmin x 2.0 Applications Automotive: backlighting in dashboards and switches Telecommunication: indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight for battery driven equipment Small indicator for outdoor applications Indicator and backlight in office equipment Flat backlight for LCDs, switches and symbols General use Document Number 83033 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 1 (6) TLMA3100 Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified TLMA3100 Parameter Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Test Conditions Symbol VR IF IFSM PV Tj Tamb Tstg Tsd RthJA Value 6 7 0.5 20 100 –40 to +100 –55 to +100 260 500 Unit V mA A mW °C °C °C °C K/W tp ≤ 10 ms Tamb ≤ 90°C t≤5s mounted on PC board (pad size > 16 mm2) Optical and Electrical Characteristics Tamb = 25_C, unless otherwise specified Yellow (TLMA3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Test Conditions IF = 2 mA IF = 2 mA IF = 2 mA IF = 2 mA IF = 2 mA IR = 10 mA VR = 0, f = 1 MHz Type Symbol IV ld lp ϕ VF VR Cj Min 0.25 581 Typ 2.5 585 ±60 2.2 20 50 Max 594 Unit mcd nm nm deg V V pF 2.9 6 Typical Characteristics (Tamb = 25_C, unless otherwise specified) 25 PV – Power Dissipation ( mW ) IF – Forward Current ( mA ) 100 95 10842 10 20 8 15 6 10 5 0 0 20 40 60 80 4 2 0 0 20 40 60 80 100 95 10841 Tamb – Ambient Temperature ( °C ) Tamb – Ambient Temperature ( °C ) Figure 1 Power Dissipation vs. Ambient Temperature Figure 2 Forward Current vs. Ambient Temperature www.vishay.de • FaxBack +1-408-970-5600 2 (6) Document Number 83033 Rev. A1, 04-Feb-99 TLMA3100 Vishay Telefunken 0° Iv rel – Relative Luminous Intensity 10 ° 20 ° Iv rel – Relative Luminous Intensity 30° 2.4 Yellow 2.0 1.6 1.2 0.8 0.4 0 0.6 95 10319 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° 0.4 0.2 0 0.2 0.4 0.6 10 95 10264 20 0.5 50 0.2 100 0.1 200 0.05 500 0.02 IF(mA) tp/T 1 Figure 3 Rel. Luminous Intensity vs. Angular Displacement 100 Iv rel – Relative Luminous Intensity IF – Forward Current ( mA ) Yellow 10 100 Figure 6 Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle Yellow 10 1 1 0.1 0.1 0 95 10053 tp/T=0.001 tp=10ms 1 2 3 4 5 0.01 0.1 95 10062 1 10 100 VF – Forward Voltage ( V ) IF – Forward Current ( mA ) Figure 4 Forward Current vs. Forward Voltage 2.0 Iv rel – Relative Luminous Intensity Yellow 1.6 Figure 7 Relative Luminous Intensity vs. Forward Current 1.2 Iv rel – Relative Luminous Intensity Yellow 1.0 0.8 0.6 0.4 0.2 0 550 95 10039 1.2 0.8 0.4 0 0 20 40 60 80 100 570 590 610 630 650 95 10054 Tamb – Ambient Temperature ( °C ) l – Wavelength ( nm ) Figure 5 Rel. Luminous Intensity vs. Ambient Temperature Figure 8 Relative Luminous Intensity vs. Wavelength Document Number 83033 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 3 (6) TLMA3100 Vishay Telefunken Dimensions in mm 95 11314 www.vishay.de • FaxBack +1-408-970-5600 4 (6) Document Number 83033 Rev. A1, 04-Feb-99 TLMA3100 Vishay Telefunken PCB Layout in mm 95 10966 Document Number 83033 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 5 (6) TLMA3100 Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de • FaxBack +1-408-970-5600 6 (6) Document Number 83033 Rev. A1, 04-Feb-99