TLMD3105

TLMD3105 Vishay Telefunken High Intensity SMD LED Color Double hetero red Type TLMD3105 Technology GaAlAs on GaAs Angle of Half Intensity ±ö 60° Description These devices have been designed for applications requiring narrow brightnes selection. This device is used for outdoor or for low power applications. The package of the TLMD3105 is the P–LCC–2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is surrounded with a white thermoplast. The reflector inside this package is filled up with clear epoxy. Features D SMD LED with exceptional brightness D Luminous intensity categorized D Compatible with automatic placement equipment 94 8553 D EIA and ICE standard package D Compatible with infrared, vapor phase and wave solder processes according to CECC D Available in 8 mm tape D Low profile package D Non-diffused lens: excellent for coupling to light pipes and backlighting D Low power consumption D Luminous intensity ratio in one packaging unit IVmax/IVmin x 1.6 Applications Automotive: backlighting in dashboards and switches Telecommunication: indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight for battery driven equipment Small indicator for outdoor applications Indicator and backlight in office equipment Flat backlight for LCDs, switches and symbols General use Document Number 83072 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 1 (6) TLMD3105 Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified TLMD3105 Parameter Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Test Conditions Symbol VR IF IFSM PV Tj Tamb Tstg Tsd RthJA Value 6 30 0.5 100 100 –40 to +100 –55 to +100 260 400 Unit V mA A mW °C °C °C °C K/W tp ≤ 10 ms Tamb ≤ 60°C t≤5s mounted on PC board (pad size > 16 mm2) Optical and Electrical Characteristics Tamb = 25_C, unless otherwise specified Double hetero red (TLMD3105 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Test Conditions IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type Symbol IV ld lp ϕ VF VR Cj Min 10 Typ 648 650 ±60 1.8 15 15 Max 32 Unit mcd nm nm deg V V pF 2.2 6 Typical Characteristics (Tamb = 25_C, unless otherwise specified) 125 PV – Power Dissipation ( mW ) IF – Forward Current ( mA ) 100 95 10905 60 50 40 30 20 10 0 0 20 40 60 80 0 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) Tamb – Ambient Temperature ( °C ) 100 75 50 25 0 95 10904 Figure 1 Power Dissipation vs. Ambient Temperature Figure 2 Forward Current vs. Ambient Temperature www.vishay.de • FaxBack +1-408-970-5600 2 (6) Document Number 83072 Rev. A1, 04-Feb-99 TLMD3105 Vishay Telefunken 10000 Tamb IF – Forward Current ( mA ) tp/T=0.005 1000 0.01 0.02 0.05 100 0.2 0.5 DC 10 0.1 Iv rel – Relative Luminous Intensity v60°C 2.0 DH Red 1.6 1.2 0.8 0.4 0 1 0.01 95 9985 0.1 1 10 100 95 10015 0 20 40 60 80 100 tp – Pulse Length ( ms ) Tamb – Ambient Temperature ( °C ) Figure 3 Forward Current vs. Pulse Length 0° Iv rel – Relative Luminous Intensity 10 ° 20 ° 30° Figure 6 Rel. Luminous Intensity vs. Ambient Temperature 2.4 Iv rel – Relative Luminous Intensity DH Red 2.0 1.6 1.2 0.8 0.4 IFAV=10mA, const. 0 10 95 10262 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 20 0.5 50 0.2 100 0.1 200 0.05 500 0.02 IF(mA) tp/T 95 10319 1 Figure 4 Rel. Luminous Intensity vs. Angular Displacement 100 Figure 7 Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle 10 Iv rel – Relative Luminous Intensity DH Red IF – Forward Current ( mA ) DH Red 1 10 0.1 1 1 95 10014 0.01 1.5 2 2.5 3 95 10016 0.1 1 10 100 VF – Forward Voltage ( V ) IF – Forward Current ( mA ) Figure 5 Forward Current vs. Forward Voltage Figure 8 Relative Luminous Intensity vs. Forward Current Document Number 83072 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 3 (6) TLMD3105 Vishay Telefunken 1.2 Iv rel – Relative Luminous Intensity DH Red 1.0 0.8 0.6 0.4 0.2 0 600 95 10018 620 640 660 680 700 l – Wavelength ( nm ) Figure 9 Relative Luminous Intensity vs. Wavelength Dimensions in mm 95 11315 www.vishay.de • FaxBack +1-408-970-5600 4 (6) Document Number 83072 Rev. A1, 04-Feb-99 TLMD3105 Vishay Telefunken PCB Layout in mm 95 10966 Document Number 83072 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 5 (6) TLMD3105 Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de • FaxBack +1-408-970-5600 6 (6) Document Number 83072 Rev. A1, 04-Feb-99