TPC27A

New Product TPC6.8 thru TPC43A Vishay General Semiconductor Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Very low profile - typical height of 1.1 mm eSMP TM Series A • Ideal for automated placement • Uni-direction only • Patented PAR® construction • Excellent clamping capability • Low incremental surge resistance • Very fast response time • Meets MSL level 1, per J-STD-020C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • Halogen-free * nted e Pat *Patent #'s 4,980,315 5,166,769 5,278,094 1 2 TO-277A (SMPC) A Anode Cathode 1 Cathode 2 PRIMARY CHARACTERISTICS VBR PPPM IFSM TJ max. 6.8 V to 43 V 1500 W 200 A 185 °C MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94V-0 flammability rating. Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC-Q101 qualified) Base P/NHM3 - halogen-free and RoHS compliant, high reliability/automotive grade (AEC-Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 HE3 and HM3 suffix meets JESD 201 class 2 whisker test TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) SYMBOL (Fig. 3) PPPM IPPM IFSM VF TJ, TSTG VALUE 1500 see next table 200 3.5 - 65 to + 185 UNIT W A A V °C Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave Maximum instantaneous forward voltage at 100 A (3) Operating junction and storage temperature range Notes (1) (2) (3) (2) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum Pulse test: 300 µs pulse width, 1 % duty cycle Document Number: 89056 Revision: 04-Aug-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product TPC6.8 thru TPC43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 MAX. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 TEST CURRENT IT (mA) 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 MAXIMUM REVERSE LEAKAGE AT VWM IR (µA) 1500 1500 500 500 200 200 50 50 20 20 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 TJ = 150 °C MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) 10 000 10 000 5000 5000 2000 2000 500 500 200 200 50 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 20 20 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) 139.0 143.0 128.0 133.0 120.0 124.0 109.0 112.0 100.0 103.0 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 DEVICE TYPE TPC6.8 TPC6.8A TPC7.5 TPC7.5A TPC8.2 TPC8.2A TPC9.1 TPC9.1A TPC10 TPC10A TPC11 TPC11A TPC12 TPC12A TPC13 TPC13A TPC15 TPC15A TPC16 TPC16A TPC18 TPC18A TPC20 TPC20A TPC22 TPC22A TPC24 TPC24A TPC27 TPC27A TPC30 TPC30A TPC33 TPC33A TPC36 TPC36A TPC39 TPC39A TPC43 TPC43A Notes (1) (2) (3) DDP DEP DFP DGP DHP DKP DLP DMP DNP DPP DQP DRP DSP DTP DUP DVP DWP DXP DYP DZP EDP EEP EFP EGP EHP EKP ELP EMP ENP EPP EQP ERP ESP ETP EUP EVP EWP EXP EYP EZP VBR measured after IT applied for 300 µs, IT = square wave pulse or equivalent Surge current waveform per Fig. 3 and derated per Fig. 2 All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89056 Revision: 04-Aug-08 New Product TPC6.8 thru TPC43A Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N TPC10AHE3/86A (1) TPC10AHE3/87A (1) TPC10AHM3/86A (1) TPC10AHM3/87A (1) Note (1) UNIT WEIGHT (g) 0.10 0.10 0.10 0.10 PREFERRED PACKAGE CODE 86A 87A 86A 87A BASE QUANTITY 1500 6500 1500 6500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel High reliability/automotive grade (AEC-Q101 qualified) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 150 TA = 25 °C Non-Repetitive Pulse Waveform shown in Fig. 3 10 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM IPPM - Peak Pulse Current, % IRSM tr = 10 µs Peak Value IPPM PPPM - Peak Power (kW) 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 1 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 10 000 VR, measured at Zero Bias 75 Junction Capacitance (pF) 1000 VR measured at Stand-Off Voltage, VWM 50 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 10 100 25 0 0 50 100 150 200 TJ - Initial Temperature (°C) VBR - Breakdown Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance Document Number: 89056 Revision: 04-Aug-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product TPC6.8 thru TPC43A Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) K 0.016 (0.40) 0.006 (0.15) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.026 (0.65) NOM. 2 1 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.047 (1.20) 0.039 (1.00) Mounting Pad Layout 0.189 MIN. (4.80) 0.189 (4.80) 0.173 (4.40) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.268 (6.80) 0.186 MIN. (4.72) 0.049 (1.24) 0.037 (0.94) 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.050 MIN. (1.27) 0.055 MIN. (1.40) Conform to JEDEC TO-277A www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89056 Revision: 04-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1