TS5YL

TS5Y Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed FEATURES • 0.25 W at 70 °C • CECC 41100 • GAM T1 • Professional grade • Wide ohmic range (10 Ω to 1 MΩ) • Full sealing The TS5 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 x 5 x 2.7 mm) with high performance and stability. The TS5 design is suitable for both manual or automatic operation, and can withstand wave and reflow soldering techniques. • Low contact resistance variation (1 % or 3 Ω) • Small size for optimum packing density • Suitable for both manual or automatic operation RoHS COMPLIANT DIMENSIONS in millimeters RECOMMENDED SOLDERING AREAS TS5YL TS5YJ TS5YL 2 1.3 b 2 TS5YJ 2 b 5 0.20 2.7 2.7 5 5.5 1.3 0.20 1.3 c a 2 1.3 4 c a 2.3 6.4 Ø 2.5 MAX 5.5 Ø 2.5 MAX 2.3 ADHESIVE PAD (detail) 3.2 0.10 1 X 0.20 a b 5 103 A6 0.9 X 0.20 1 × 0.20 a b 0.9 × 0.20 0.10 0.65 J VERSION 1.1 Ø 2.5 adhesive pad 2.30 c 5 c 2.30 CIRCUIT DIAGRAM a (1) b CW (2) c (3) cruciform screwdriver slot ø 2.5, width 0.5 deep: 0.55 max deep (center): 0.7 Document Number: 51007 Revision: 27-Jun-07 Tolerance unless otherwise specified ± 0.25 mm www.vishay.com 15 For technical questions, contact: sfer@vishay.com TS5Y Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard Series Tolerance Standard Power Rating Temperature Coefficient Limiting Element Voltage (Linear Law) Contact Resistance Variation End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance Specification Linear Logarithmic Cermet 220° ± 15° 10 Ω to 1 MΩ 1-2-5 ± 10 % 0.25 W at 70 °C not applicable See Standard Resistance Element Data 200 V 1 % or 3 Ω 0.1 % or 3 Ω 1000 V 1 GΩ in accordance with CECC 41100 MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Unit Weight (max. g) 270° ± 10° 1.5 3.5 0.15 POWER RATING CHART 0.25 0.2 RATED POWER IN W ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 125 °C 55/125/56 fully sealed container solder immersion IP67 0.15 0.1 0.05 0 0 20 40 60 70 85 100 120 140 155 AMBIENT TEMPERATURE IN °C PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS CONDITIONS 1000 hours at rated power 90'/30' - ambient temperature + 70 °C Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles Temperature 40 °C - RH 93 % 56 days 55 °C to + 125 °C - 5 cycles 100 cycles - rated power 50 g - 11 ms 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g - 6 hours ±2% ±2% ΔRT (%) RT ΔR1-2 (%) R1-2 ±3% ±3% Load Life Contact resistance variation: ΔR < 1 % Rn Climatic Sequence ±2% Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ ±1% ± (3 % + 5 Ω) ±1% ±1% ±3% Long Term Damp Heat Thermal Shock Rotational Life (Electrical and Mechanical) Shock Vibration ΔV1-2 ≤±2% V1-3 ΔV1-2 ≤±1% V1-3 ΔV1-2 ≤±1% V1-3 www.vishay.com 16 For technical questions, contact: sfer@vishay.com Document Number: 51007 Revision: 27-Jun-07 TS5Y Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES Ω 10 20 50100 200 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M LINEAR LAW MAX. MAX. CUR. MAX. POWER WORKING THROUGH AT 70 °C VOLTAGE ELEMENT W 0.25 V 1.58 2.24 3.545.00 7.07 11.2 15.8 22.4 35.4 50.0 70.7 112 158 200 200 200 mA 158 112 7150 35 22 16 11 7 5 3.5 2.2 1.6 1.0 0.4 0.2 TYPICAL TCR - 55 °C + 125 °C ppm/°C Vishay Sfernice MARKING (RED MARK) VISHAY trademark, ohmic value, manufacturing date, red mark. The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier. Example: 100 = 10 Ω 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω SOLDERING RECOMMENDATIONS ± 100 see Application notes 0.25 0.20 0.08 0.04 PACKAGING On tape and reel of 500 pieces, code TR and 2000 pieces, code TR1 3 solts - width 2 to 120° - ø ext. 23 Ø 12.7 2 Ø 70 Ø 178 0.3 ±2 8 13 5.2 12 2 4 Ø 1.5 7.6 5.5 3.2 1.75 Cover tape panel strength specifications EIA 481 A and CEI 60286-3. ORDERING INFORMATION TS5 SERIES YL STYLE 500 kΩ OHMIC VALUE ± 10 % TOLERANCE TR500 PACKAGING TR: Tape and reel 500 pcs TR1: Tape and reel 2000 pcs e3 LEAD FINISH e3: pure Sn SAP PART NUMBERING GUIDELINES T S 5 Y L 5 0 4 K R 1 0 MODEL STYLE OHMIC VALUE TOL PACKAGING CODE SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51007 Revision: 27-Jun-07 For technical questions, contact: sfer@vishay.com www.vishay.com 17 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1