TS6

TS6 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Ceremt Trimmers, Fully Sealed FEATURES • 0.25 W at 85 °C • GAM T1 • Military and professional grade • Multi-turn operation Three variations are available according to the positioning of the control screw and contact positions. The TS6 multi-turn trimmer has been designed for use in PCB surface mounting applications. RoHS COMPLIANT • A low contact resistance variation (down to 2 % Rn) • Low end contact resistance (1 Ω typical) • Full sealing • Tests according to CECC 41 000 The cermet track gives a high stability performance with an extended ohmic capacity of 10 Ω to 2 MΩ DIMENSIONS in millimeters TS6X slot 0.5 x 0.5 5.8 ± 0.10 0.25 RECOMMENDED SOLDERING AREAS 5 max Ø 1.8 0.7 1 1 ± 0.10 c b Ø 0.45 2.54 2.54 0.20 2.54 c b a 2.54 3 7.5 6.85 max 6.7 max 6.85 max TS6Z 6.85 max slot 0.5 x 0.5 3 Ø 1.8 1.3 ± 0.1 5 max b 9.3 1 ± 0.1 0.25 6.85 max 7.6 max 8.85 max c a Ø 0.45 2.54 2.54 1 5.3 max 2.54 2.54 TS6Y 6.85 max 2.54 6.85 max 0.3 slot 0.5 x 0.5 2.54 2.54 Ø 1.8 5 max b 6.85 max c a 2.54 1 7.5 3 c b 1.3 ± 0.1 Ø 0.45 a 1 ± 0.10 8 max 6.7 max CIRCUIT DIAGRAM a (1) b (2) Tolerance unless otherwise specified ± 0.5 Document Number: 51010 Revision: 26-Jun-07 For technical questions, contact: sfer@vishay.com www.vishay.com 27 cw c (3) TS6 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Ceremt Trimmers, Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard Series E3 and Series Tolerance Power Rating Linear Temperature Coefficient Limiting Element Voltage (Linear Law) Contact Resistance Variation End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance Standard On request Cermet 13 turns ± 2 10 Ω to 2 MΩ 1 - 2.2 - 4.7 and 1 - 2 - 5 ± 10 % ±5% 0.25 W at 85 °C See Standard Resistance Element Data 250 V 2 % Rn or 2 Ω 1Ω 1000 V 106 MΩ MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Unit Weight (max. g) Wiper (actual travel) 15 turns ± 5 1.5 clutch action 0.5 positioned at approx. 50 % POWER RATING CHART 0.25 RATED POWER IN W ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 155 °C 55/125/56 fully sealed container solder immersion IP67 0.125 0 0 50 85 100 AMBIENT TEMPERATURE IN °C 155 PERFORMANCE CECC 41100 TESTS CONDITIONS Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles 56 days 40 °C 93 % RH 200 cycles at rated power 1000 h at rated power 90’/30’ - ambient temp. 85 °C 5 cycles - 55 °C to + 125 °C 50 g at 11m secs 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g for 6 hours ΔRT (%) REQUIREMENTS RT ΔR1-2 (%) R1-2 TYPICAL VALUES AND DRIFTS ΔRT (%) RT ΔR1-2 (%) R1-2 Climatic Sequence ±2% ±3% ± 0.5 % ±1% ±2% Dielectric strength: 250 V RMS Insulation resistance: > 100 MΩ ±2% Contact res. variat.: < 3 % Rn ±2% Contact res. variat.: < 3 % Rn ± 1.5 % ΔV1-2 V1-3 ±3% ± 0.5 % ±1% Long Term Damp Heat Rotational Life (Electrical, Mechanical) Load Life Thermal Shock Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ ± (2 % + 3 Ω) Contact res. variat.: < 1 % Rn ±4% ±1% ±2% Contact res. variat.: < 1 % Rn ± 0.5 % ΔV1-2 V1-3