TZX8V2A

TZX-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Very sharp reverse characteristic • Low reverse current level • Very high stability • Low noise • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition APPLICATIONS • Voltage stabilization PRIMARY CHARACTERISTICS PARAMETER VZ range nom. Test current IZT VZ specification Int. construction VALUE 2.4 to 36 2; 5 Pulse current Single UNIT V mA ORDERING INFORMATION DEVICE NAME TZX-series TZX-series ORDERING CODE TZX-series-TAP TZX-series-TR TAPED UNITS PER REEL 10 000 per ammopack (52 mm tape) 10 000 per 14" reel (52 mm tape) MINIMUM ORDER QUANTITY 30 000/box 30 000/box PACKAGE PACKAGE NAME DO-35 WEIGHT 125 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Thermal resistance junction to ambient air Junction temperature Storage temperature range Forward voltage (max.) IF = 200 mA l = 4 mm, TL =constant TEST CONDITION l = 4 mm, TL = 25 °C SYMBOL Ptot IZ RthJA Tj Tstg VF VALUE 500 Ptot/VZ 300 175 - 65 to + 175 1.5 UNIT mW mA K/W °C °C V Rev. 2.3, 22-Nov-11 Document Number: 85614 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZX-Series www.vishay.com Vishay Semiconductors TEST CURRENT IZT1 mA MAX. 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.5 5.6 5.7 5.8 5.9 6 6.1 6.3 6.4 6.6 6.7 6.9 7 7.2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 μA MAX. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3.5 3.5 3.5 3.5 DYNAMIC RESISTANCE ZZ at IZT1 Ω MAX. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 40 40 40 40 40 15 15 15 15 15 15 15 15 15 V ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MIN. TZX2V4A TZX2V4B TZX2V7A TZX2V7B TZX2V7C TZX3V0A TZX3V0B TZX3V0C TZX3V3A TZX3V3B TZX3V3C TZX3V6A TZX3V6B TZX3V6C TZX3V9A TZX3V9B TZX3V9C TZX4V3A TZX4V3B TZX4V3C TZX4V3D TZX4V7A TZX4V7B TZX4V7C TZX4V7D TZX5V1A TZX5V1B TZX5V1C TZX5V1D TZX5V6A TZX5V6B TZX5V6C TZX5V6D TZX5V6E TZX6V2A TZX6V2B TZX6V2C TZX6V2D TZX6V2E TZX6V8A TZX6V8B TZX6V8C TZX6V8D 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 6 6.1 6.3 6.4 6.6 6.7 6.9 VZ at IZT1 V NOM. 2.4 2.4 2.7 2.7 2.7 3.0 3.0 3.0 3.3 3.3 3.3 3.6 3.6 3.6 3.9 3.9 3.9 4.3 4.3 4.3 4.3 4.7 4.7 4.7 4.7 5.1 5.1 5.1 5.1 5.6 5.6 5.6 5.6 5.6 6.2 6.2 6.2 6.2 6.2 6.8 6.8 6.8 6.8 REVERSE LEAKAGE CURRENT IR at VR V IR at VR (1) μA MAX. 50 50 10 10 10 6 6 6 2 2 2 2 2 2 2 2 2 1 1 1 1 6 5 4 3 2 2 2 2 1 1 1 1 1 3 3 3 3 3 2 2 2 2 Rev. 2.3, 22-Nov-11 Document Number: 85614 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZX-Series www.vishay.com Vishay Semiconductors TEST CURRENT IZT1 mA MAX. 7.3 7.6 7.7 7.9 7.45 8.1 8.3 8.5 8.7 8.9 9.1 9.3 9.5 9.7 9.9 10.1 10.3 10.6 10.8 11.1 11.3 11.6 11.9 12.1 12.4 12.7 12.03 12.9 13.1 13.4 13.7 14 14.3 14.7 15.1 15.5 15.09 15.9 16.5 17.1 17.7 18.3 19 19.7 20.4 21.2 21.9 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2 2 2 2 μA MAX. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 5 5 5 5 6.2 6.2 6.2 6.2 6.8 6.8 6.8 6.8 6.8 7.5 7.5 7.5 7.5 8.2 8.2 8.2 8.2 9.5 9.5 9.5 9.5 9.5 10 10 10 11 11 11 11.5 11.5 11.5 11.5 12 12 12 13 13 13 15 15 15 17 DYNAMIC RESISTANCE ZZ at IZT1 Ω MAX. 6.65 6.84 6.94 7.13 6.72 7.32 7.5 7.7 7.98 8.08 8.27 8.46 8.65 8.84 9.03 9.22 9.41 9.69 9.88 10.2 10.4 10.5 10.8 11 11.3 11.6 10.9 11.8 12 12.3 12.5 12.8 13.1 13.4 13.8 14.2 13.6 14.5 14.9 15.5 16.1 16.6 17.2 17.9 18.5 19.2 19.9 15 15 15 15 15 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 40 40 40 40 45 45 45 55 55 55 60 60 60 65 V ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MIN. TZX7V5A TZX7V5B TZX7V5C TZX7V5D TZX7V5X TZX8V2A TZX8V2B TZX8V2C TZX8V2D TZX9V1A TZX9V1B TZX9V1C TZX9V1D TZX9V1E TZX10A TZX10B TZX10C TZX10D TZX11A TZX11B TZX11C TZX11D TZX12A TZX12B TZX12C TZX12D TZX12X TZX13A TZX13B TZX13C TZX14A TZX14B TZX14C TZX15A TZX15B TZX15C TZX15X TZX16A TZX16B TZX16C TZX18A TZX18B TZX18C TZX20A TZX20B TZX20C TZX22A Rev. 2.3, 22-Nov-11 7 7.2 7.3 7.5 7.07 7.7 7.9 8.1 8.3 8.5 8.7 8.9 9.1 9.3 9.5 9.7 9.9 10.2 10.4 10.7 10.9 11.1 11.4 11.6 11.9 12.2 11.44 12.4 12.6 12.9 13.2 13.5 13.8 14.1 14.5 14.9 14.35 15.3 15.7 16.3 16.9 17.5 18.1 18.8 19.5 20.2 20.9 VZ at IZT1 V NOM. 7.5 7.5 7.5 7.5 7.5 8.2 8.2 8.2 8.2 9.1 9.1 9.1 9.1 9.1 10 10 10 10 11 11 11 11 12 12 12 12 12 13 13 13 14 14 14 15 15 15 15 16 16 16 18 18 18 20 20 20 22 REVERSE LEAKAGE CURRENT IR at VR V IR at VR (1) μA MAX. 30 30 30 30 30 0.1 0.1 0.1 0.1 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 Document Number: 85614 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZX-Series www.vishay.com Vishay Semiconductors TEST CURRENT IZT1 mA MAX. 22.6 23.3 24 24.7 25.5 23.77 26.6 27.6 28.6 28.39 29.6 30.6 31.6 30.51 32.6 33.6 34.5 35.7 36.8 38 37.19 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 μA MAX. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 17 17 19 19 19 19 21 21 21 21 23 23 23 23 25 25 25 27 27 27 27 DYNAMIC RESISTANCE ZZ at IZT1 Ω MAX. 20.5 21.2 21.8 22.4 23.1 21.5 23.9 24.9 25.8 25.6 26.8 27.7 28.7 27.6 29.6 30.6 31.5 32.5 33.5 34.6 33.6 65 65 70 70 70 70 80 80 80 80 100 100 100 100 120 120 120 140 140 140 140 V ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MIN. TZX22B TZX22C TZX24A TZX24B TZX24C TZX24X TZX27A TZX27B TZX27C TZX27X TZX30A TZX30B TZX30C TZX30X TZX33A TZX33B TZX33C TZX36A TZX36B TZX36C TZX36X 21.6 22.3 22.9 23.6 24.3 22.61 25.2 26.2 27.2 26.99 28.2 29.2 30.2 29.02 31.2 32.2 33.2 34.2 35.3 36.4 35.36 VZ at IZT1 V NOM. 22 22 24 24 24 24 27 27 27 27 30 30 30 30 33 33 33 36 36 36 36 REVERSE LEAKAGE CURRENT IR at VR V IR at VR (1) μA MAX. 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 Notes • Additional measurement of voltage group TZM9V1 to TZX36, IR at 95 % VZmin. ≤ 40 nA at Tj = 25 °C (1) Additional measurement BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) RthJA - Therm. Resist. Junction Ambient (K/W) 500 400 300 l 200 100 TL = constant 0 0 5 10 15 20 95 9611 Ptot - Total Power Dissipation (mW) 600 500 400 300 200 100 0 0 80 120 160 200 40 Tamb - Ambient Temperature (°C) l I - Lead Length (mm) 95 9602 Fig. 1 - Thermal Resistance vs. Lead Length Fig. 2 - Total Power Dissipation vs. Ambient Temperature Rev. 2.3, 22-Nov-11 Document Number: 85614 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZX-Series www.vishay.com Vishay Semiconductors 200 1000 Tj = 25 °C 100 CD - Diode Capacitance (pF) VZ - Voltage Change (mV) 150 VR = 2 V Tj = 25 °C 100 IZ = 5 mA 10 50 1 0 95 9598 0 5 10 15 20 25 95 9601 0 5 10 15 20 25 VZ - Z-Voltage (V) VZ - Z-Voltage (V) Fig. 3 - Typical Change of Working Voltage under Operating Conditions at Tamb = 25 °C Fig. 6 - Diode Capacitance vs. Z-Voltage 1.3 100 VZtn - Relative Voltage Change VZtn = VZt/VZ (25 °C) IF - Forward Current (mA) 1.2 TKVZ = 10 x 10-4/K 8 x 10-4/K 6 x 10-4/K 4 x 10-4/K 2 x 10-4/K 10 1.1 1 Tj = 25 °C 1.0 0.9 0 - 2 x 10-4/K - 4 x 10-4/K 0.1 0.01 0.8 - 60 95 9599 0.001 0 60 120 180 240 95 9605 0 0.2 0.4 0.6 0.8 1.0 Tj - Junction Temperature (°C) VF - Forward Voltage (V) Fig. 4 - Typical Change of Working Voltage vs. Junction Temperature Fig. 7 - Forward Current vs. Forward Voltage 100 15 TKVZ - Temperature Coefficient of VZ (10-4/K) 80 10 IZ - Z-Current (mA) Ptot = 500 mW Tamb = 25 °C 60 5 IZ = 5 mA 0 40 20 0 -5 0 4 6 8 12 20 0 95 9600 10 20 30 40 50 95 9604 VZ - Z-Voltage (V) VZ - Z-Voltage (V) Fig. 8 - Z-Current vs. Z-Voltage Fig. 5 - Temperature Coefficient of Vz vs. Z-Voltage Rev. 2.3, 22-Nov-11 Document Number: 85614 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZX-Series www.vishay.com Vishay Semiconductors 1000 Ptot = 500 mW Tamb = 25 °C 50 40 rZ - Differential Z-Resistance (Ω) IZ - Z-Current (mA) IZ = 1 mA 100 30 5 mA 10 10 mA 20 10 0 15 95 9607 1 20 25 30 35 95 9606 Tj = 25 °C 0 5 10 15 20 25 VZ - Z-Voltage (V) Fig. 9 - Z-Current vs. Z-Voltage Zthp - Thermal Resistance for Pulse Cond. (KW) VZ - Z-Voltage (V) Fig. 10 - Differential Z-Resistance vs. Z-Voltage 1000 tp/T = 0.5 100 tp/T = 0.2 Single Pulse RthJA = 300 K/W T = Tjmax - Tamb tp/T = 0.01 tp/T = 0.1 tp/T = 0.02 iZM = (- VZ + (VZ2 + 4rzj x T/Zthp) 1/2)/(2rzj) tp/T = 0.05 10 1 10-1 100 101 tp - Pulse Length (ms) 102 95 9603 Fig. 11 - Thermal Response PACKAGE DIMENSIONS in millimeters (inches): DO-35 Cathode identification 0.55. (0.022) max. 26 (1.024) min. 3.9 (0.154) max. 26 (1.024) min. Rev. 6 - Date: 29. January 2007 Document no.: 6.560-5004.02-4 94 9366 Rev. 2.3, 22-Nov-11 Document Number: 85614 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.7 (0.067) 1.5 (0.059) Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000