New Product
U2B, U2C, U2D
Vishay General Semiconductor
Surface Mount Ultrafast Plastic Rectifier
FEATURES
• Oxide planar chip junction • Ultrafast recovery time • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC
DO-214AA (SMB)
TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM trr VF at IF = 2.0 A TJ max. 2.0 A 100 V, 150 V, 200 V 50 A 20 ns 0.76 V 150 °C
For use in low voltage, high frequency rectifier of switching power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application.
MECHANICAL DATA
Case: DO-214AA (SMB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end per
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM IF(AV) IFSM TJ, TSTG SYMBOL U2B U2B 100 U2C U2C 150 2.0 50 - 55 to + 150 U2D U2D 200 V A A °C UNIT
Document Number: 89096 Revision: 13-Oct-09
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 1
New Product
U2B, U2C, U2D
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Instantaneous forward voltage IF = 2 A TEST CONDITIONS TA = 25 °C TA = 100 °C TA = 25 °C TA = 100 °C TA = 25 °C TA = 25 °C TA = 100 °C TA = 25 °C TA = 100 °C Qrr CJ trr SYMBOL VF (1) IR (2) TYP. 0.86 0.76 180 27 35 9 19 16 MAX. 0.90 0.83 10 350 20 nC pF ns UNIT V
Reverse current
Rated VR IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A
μA
Reverse recovery time
IF = 2.0 A, dI/dt = 50 A/μs, VR = 30 V, lrr = 0.1 IRM IF = 2.0 A, dI/dt = 50 A/μs, VR = 30 V, lrr = 0.1 IRM 4.0 V, 1 MHz
Storage charge Typical junction capacitance
Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Typical thermal resistance SYMBOL RθJA
(1)
U2B
U2C 105 18
U2D
UNIT °C/W
RθJM (1)
(1)
Note Free air, mounted on recommended copper pad area. Thermal resistance RθJA - junction to ambient, RθJM - junction to mount
ORDERING INFORMATION (Example)
PREFERRED P/N U2D-E3/52T U2D-E3/5BT UNIT WEIGHT (g) 0.099 0.099 PREFERRED PACKAGE CODE 52T 5BT BASE QUANTITY 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
3.0 2.0 Resistive or Inductive Load D = 0.8 D = 0.3 D = 0.5
Average Forward Rectified Current (A)
Average Power Loss (W)
1.6 D = 0.2 D = 0.1 1.2 D = 1.0
2.0
0.8 T 0.4 D = tp/T tp 2.0 2.4
1.0
0 80 90 100 110 120 130 140 150
0 0 0.4 0.8 1.2 1.6
TM - Mount Temperature (°C)
Average Forward Current (A)
Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2
Fig. 2 - Forward Power Loss Characteristics Document Number: 89096 Revision: 13-Oct-09
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
New Product
U2B, U2C, U2D
Vishay General Semiconductor
100
100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p
Instantaneous Forward Current (A)
10
TA = 150 °C
1 TA = 125 °C 0.1 TA = 25 °C TA = 100 °C
Junction Capacitance (pF)
1.3
10
0.01 0.1 0.3 0.5 0.7 0.9 1.1
1 0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
10 000
1000
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (μA)
TA = 150 °C 1000 TA = 125 °C TA = 100 °C 100
Junction to Ambient
100
10 TA = 25 °C 1
10
0.1 10 20 30 40 50 60 70 80 90 100
1 0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AA (SMB) Cathode Band Mounting Pad Layout
0.085 (2.159) MAX. 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21)
0.060 (1.52) MIN. 0.220 (5.59) REF.
Document Number: 89096 Revision: 13-Oct-09
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1